NOTES:

1. USE ASP-103597-01-B BODY FOR NON-STANDARD 19 POSITION.

2. REPRESENTS A CRITICAL DIMENSION.

3. BURR ALLOWANCE: .0005[0.013] MAX.

4. MINIMUM PUSHOUT FORCE: .5 LB.

5. MAXIMUM ALLOWABLE BOW: .002[0.05] INCH/INCH AFTER ASSEMBLY.

6. CONTACT TO BE FLUSH ±.002[0.05].

7. ONE REEL MINIMUM PLATING REQUIREMENT (85,000 CONTACTS PER REEL).

8. ALL DIMS TO BE SYMMETRICAL ABOUT THE CENTERLINE WITHIN ±.001[0.03].

9. MAXIMUM VARIATION BETWEEN SOLDERBALLS: .0025[0.064]

10. REFER TO VISUAL INSPECTION BOARD FOR SOLDERBALL APPEARANCE CHECKS.

11. THE DISTANCE FROM THE CENTER OF ANY SOLDERBALL TO THE CENTER OF ANY ADJACENT INNER PEG SHALL BE .025±.005[0.64±0.13].

12. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY`S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED.

13. LEAD FREE SOLDER BALLS.