Description
The CAR2512FP series of Front-End rectifiers provide highly efficient isolated power from worldwide input mains in a compact 1U industry standard form factor in an unprecedented power density of 25W/in3 . These rectifiers are ideal for datacom applications such as enterprise networking, mid to high-end servers, and storage equipment, where mid to light load efficiency is of key importance given the nature of the power consumption of the end application.

Features
● Universal input with PFC
● Constant power characteristic
● 2 front panel LEDs: 1-input;2-[output, fault, over temp]
● Remote ON/OFF control of the 12Vdc output
● Remote sense on the 12Vdc output
● No minimum load requirements
● Active load sharing (single wire)
● Hot Plug-ability
● Efficiency: typically 92.5% @ 50% load and 90.0% @ 20% load
● Standby orderable either as 3.3Vdc or 5Vdc
● Auto recoverable OC & OT protection
● Operating temperature: -10 - 70°C (de-rated above 50°C)
● Digital status & control: I2C and PMBus serial bus
● EN/IEC/UL60950-1 2nd edition; UL, CSA and VDE
● EMI: class A FCC docket 20780 part 15, EN55022
● Meets EN6100 immunity and transient standards
● Shock & vibration: NEBS GR-63-CORE, level 3

Applications
● 12Vdc distributed power architectures
● Datacom and Telecom applications
● Mid to high-end Servers
● Enterprise Networking
● Network Attached Storage
● Telecom Access Nodes
● Routers/Switches
● Broadband Switches
● ATE Equipment