GENERAL DESCRIPTION
The AD8145 is a triple, low cost, differential-to-single-ended receiver specifically designed for receiving red-green-blue (RGB) video signals over twisted pair cable or differential printed circuit board (PCB) traces. It can also be used to receive any type of analog signal or high speed data transmission. Two auxiliary comparators with hysteresis are provided that can be used to decode video sync signals, which are encoded on the received common-mode voltages, to receive digital signals or as general-purpose comparators. The AD8145 can be used in conjunction with the AD8133 or AD8134 triple differential drivers to provide a complete low cost solution for RGB over Category 5 UTP cable applications, including KVM.

FEATURES
   High speed: 500 MHz, 2000 V/µs @ G = 1, VOUT = 2 V p-p
   0.1 dB flatness out to 75 MHz
   High CMRR: 69 dB @ 10 MHz
   High differential input impedance: 1 MΩ
   Wide input common-mode range: ±3.5 V (±5 V supplies)
   On-chip, gain setting resistors can be configured for gain of 1 or 2
   Fast settling: 15 ns to 0.1% @ 2 V p-p
   Low input referred noise: 13 nV/√Hz
   Disable feature
   Small packaging: 32-lead, 5 mm × 5 mm LFCSP
   AEC-Q10 qualified (AD8145W)
  
APPLICATIONS
   RGB video receivers
   YPbPr video receivers
   Keyboard, video, mouse (KVM)
   Unshielded twisted pair (UTP) receivers
   Qualified for automotive applications
   Automotive driver assistance (AD8145W)
   Automotive Infotainment (AD8145W)