Description

The CD40104BMS is a universal shift register featuring parallel inputs, parallel outputs, SHIFT RIGHT and SHIFT LEFT serial inputs, and a high impedance third output state allowing the device to be used in bus organized systems.

In the parallel load mode (S0 and S1 are high), data is loaded into the associated flip-flop and appears at the output after the positive transition of the CLOCK input. During loading, serial data flow is inhibited. Shift right and shift left are accomplished synchronously on the positive clock edge with serial data entered at the SHIFT RIGHT and SHIFT LEFT serial inputs, respectively. Clearing the register is accomplished by setting both mode controls low and clocking the register. When the output enable input is low, all outputs assume the high impedance state.

Features

• High Voltage Type (20V Rating)

• Medium Speed fCL = 12MHz (typ.) at VDD = 10V

• Fully Static Operation

• Synchronous Parallel or Serial Operation

• Three State Outputs (CD40104BMS)

• Asynchronous Master Reset (CD40194BMS)

• 5V, 10V and 15V Parametric Ratings

• Standardized Symmetrical Output Characteristics

• Meets All Requirements of JEDEC Tentative Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices”

Applications

• Arithmetic Unit Bus Registers

• Serial/Parallel Conversions

• General Purpose Register for Bus Organized Systems

• General Purpose Registers