Dual High Speed Laser Driver

The HIP9022 Dual High Speed Laser Driver is designed to operate with a constant current drain from the power supply. This current defines the laser operating power. The current is accurately controlled in the range of 0.5A to 2A to deliver constant optical power from the laser when used with an external Power FET and Power Sense resistor. The operating circuit allows flexibility in choosing driver current levels.

Features

• Dual High Speed Laser Driver with Data Rates up to 2.5MHz

• 0.5A to 2A Range of Constant Current Source Controlled to 0.1% Full Scale

• Low Signal Transients with Controlled Constant Current Switching

• Laser Optical Power Controlled to Better than 0.5%

• Thermoelectric Cooler (TEC) Circuit to Control Temperature to within 0.25oC

• Multiplexed Sample/Hold (S/H) Bus Interface

• Serial Diagnostic Bus with Multiplexed Output

• High Current ESD Diodes for Laser Diode Protection



Applications

• Dual Laser Printer Driver