GENERAL DESCRIPTION

The MX26C1000B is a 5V only, 1M-bit, MTP EPROM™ (Multiple Time Programmable Read Only Memory). It is organized as 128K words by 8 bits per word, operates from a single + 5 volt supply, has a static standby mode, and features fast single address location programming. All programming signals are TTL levels, requiring a single pulse. It is design to be programmed and erased by an EPROM programmer or on-board. The MX26C1000B supports a intelligent fast programming algorithm which can result in programming time of less than one minute.

FEATURES

• 128Kx 8 organization

• Single +5V power supply

• +12V programming voltage

• Fast access time:90/100/120/150 ns

• Totally static operation

• Completely TTL compatible

• Operating current:30mA

• Standby current: 100uA

• 50 minimum erase/program cycles

• Chip erase time: 1 (typ.)

• Chip program time: 6.25 (typ.)

• Typical fast programming cycle duration 10us/byte

• Package type:

    - 32 pin plastic DIP

    - 32 pin PLCC

    - 32 pin TSOP

    - 32 pin SOP