General Description

The MIC5202 is a family of dual linear voltage regulators with very low dropout voltage (typically 17mV at light loads and 210mV at 100mA), and very low ground current (1mA at 100mA output–each section), offering better than 1% initial accuracy with a logic compatible ON/OFF switching input. Designed especially for hand-held battery powered devices, the MIC5202 is switched by a CMOS or TTL compatible logic signal. This ENABLE control my be tied directly to VIN if un needed. When disabled, power consumption drops nearly

to zero. The ground current of the MIC5202 increases only slightly in dropout, further prolonging battery life. Key MIC5202 features include protection against reversed battery, current limiting, and over-temperature shutdown.

Features

• High output voltage accuracy

• Variety of output voltages

• Guaranteed 100mA output

• Low quiescent current

• Low dropout voltage

• Extremely tight load and line regulation

• Very low temperature coeffi cient

• Current and thermal limiting

• Reverse-battery protection

• Zero OFF mode current

• Logic-controlled electronic shutdown

• Available in SO-8 package

Applications

• Cellular Telephones

• Laptop, Notebook, and Palmtop Computers

• Battery Powered Equipment

• PCMCIA VCC and VPP Regulation/Switching

• Bar Code Scanners

• SMPS Post-Regulator/ DC to DC Modules

• High Effi ciency Linear Power Supplies