GENERAL DESCRIPTION
The TC530/534 are serial analog data acquisition subsystems ideal for high precision measurements (up to 17 bits plus sign). The TC530 consists of a dual slope integrating A/D converter, negative power supply generator and 3 wire serial interface port. The TC534 is identical to the TC530, but adds a four channel differential input multiplexer. Key A/D converter operating parameters (Auto Zero and Integration time) are programmable, allowing the user to trade-off conversion time for resolution.
The TC530/534 timebase can be derived from an external crystal of 2MHz (max), or from an external frequency source. The TC530/534 requires a single 5V power supply and features a – 5V, 10mA output which can be used to supply negative bias to other components in the system.

FEATURES
■ Precision (up to 17 Bits) A/D Converter
■ 3 Wire Serial Port
■ Flexible: User Can Trade-Off Conversion Speed Against Resolution
■ Single Supply Operation
■ –5V Output Pin
■ 4 Input, Differential Analog MUX (TC534)
■ Automatic Input Polarity and Overrange Detection
■ Low Operating Current ............................ 5mA Max
■ Wide Analog Input Range ...................... ±4.2V Max
■ Cost Effective