Description
The AP1694A is a high performance AC/DC power factor corrector for mains dimmable LED driver applications. The device uses Pulse Frequency Modulation (PFM) technology to regulate output current while achieving high power factor and low THD. It operates as a BCM (Boundary Conduction Mode) controller which is good for EMI.

Features
• Primary Side Control for Output Current Regulation without Optocoupler
• Boundary Conduction Mode (BCM) Operation to Achieve Highefficiency
• High PF and Low THD (PF > 0.9, THD < 30%)
• High Efficiency without Dimmer
• Wide Range of Dimmer Compatibility
• Dimming Curve Compliant with NEMA SSL6
• Low Start-up Current
• Tight LED Current
• Tight LED Open Voltage
• Valley-mode Switching to Minimize the Transition Loss
• Mosfet driver up to 25W
• Easy EMI
• Internal Protections:
   ◾ Under Voltage Lock Out(UVLO)
   ◾ Leading-edge Blanking (LEB)
   ◾ Output Short Protection
   ◾ Output Open Protection
   ◾ Over Temperature Protection
• Flexible for Design with Small Form Factor and Very Low BOM Cost
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)

Applications
• Mains Dimmable LED Lighting