General Information

The SAB 82525 is a High-Level Serial Communication Controller compatible to the SAB 82520

HSCC with extended features and functionality (HSCX). The SAB 82526 is pin and software compatible to the SAB 82525, realizing one HDLC channel (channel B). The HSCX has been designed to implement high-speed communication links using HDLC protocols and to reduce the hardware and software overhead needed for serial synchronous communications.

Features

Serial Interface

Two independent full-duplex HDLC channels (SAB 82526: one channel)

  –On chip clock generation or external clock source

  –On chip DPLL for clock recovery for each channel

  –Two independent baudrate generators (SAB 82526: one baudrate generator)

  –Independent time-slot assignment for each channel with programmable time-slot length (1-256 bit)

Different modes of data encoding

Modem control lines (RTS, CTS, CD)

Support of bus configuration by collision resolution

Programmable bit inversion

Transparent receive/transmit of data bytes without HDLC framing

Continuous transmission of 1 to 32 bytes possible

Data rate up to 4 Mbit/s