USB 3.0 to FIFO Bridge

The FT600/FT601 is a USB 3.0 to FIFO interface bridge chip with the following advanced features:

• Supports USB 3.0 Super Speed (5Gbps)/USB
   2.0 High Speed (480Mbps)/USB 2.0 Full
   Speed (12Mbps) transfer.
• Supported USB Transfer Type:
   Control/Bulk/Interrupt
• Up to 8 configurable endpoints (PIPEs).
• Supports 2 parallel slave FIFO bus protocols
   245 and FIFO mode, FT601 with 32 bit
   parallel interface has a data bursting rate up
   to 400MB/s.
• Supports 4 IN channels and 4 OUT channels
   on FIFO bus connectivity.
• Built-in 16kB FIFO data buffer RAM.
• Supports Remote Wakeup capability.
• Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
• Configurable GPIO support.
• Internal LDO 1.0V regulator.
• Integrated power-on-reset circuit.
• User programmable USB descriptors.
• Supports Battery Charging spec. BC1.2.
• Available as FT600-16bit/FT601-32bit FIFO interface.
• Industrial operating temperature range: -40 to 85⁰C.
• Available in compact Pb-free QFN-76(32bit) and QFN-
   56(16bit) packages (both RoHS compliant).

Typical Applications
• Upgrading Legacy Peripherals to USB
• Utilising USB to add system modularity
• Interfacing PLD/FPGA based designs to USB 3.0
• USB 3.0 data acquisition
• USB 3.0 Digital Video Camera Interface
• USB 3.0 Digital Camera
• USB 3.0 Interface for Printer/Scanner
• Medical/Industrial imaging devices
• USB 3.0 Instrumentation