Description
The ST6-EPB programming board is designed for single-site programming of EPROM or OTP ST6 microcontrollers. The ST6-EPB supports two operating modes, either in standalone mode, or whilst connected to a PC. In standalone mode, microcontrollers can be programmed by simple key operation. The programmer also supports Blank-check and Verify tests in standalone mode. The ST6-EPB can be also connected via a serial or parallel interface to a host PC running the ST6 Windows EEPROMER (WINEE software). The ST6 EPROM offers Read, Program, Verify and Blank-check features along with many other functions.

Features
■ Programming of ST6 devices with EPROM or OTP memory
■ Dedicated EPB for each ST6 microcontroller family with support for all corresponding