General Description
The MIC5254 is an efficient, precise, dual CMOS voltage regulator. It offers better than 1% initial accuracy, extremely low dropout voltage (typically 135mV at 150mA) and low ground current (typically 90µA) over load. The MIC5254 features two independent LDOs with error flags that indicate an output fault condition such as overcurrent, thermal shut-down and dropout.

Features
• Input voltage range: 2.7V to 6.0V
• Dual, independent 150mA LDOs
• Error flags indicate fault condition
• Stable with ceramic output capacitor
• Ultra-low dropout: 135mV @ 150mA
• High output accuracy: 1.0% initial accuracy 2.0% over temperature
• Low quiescent current: 90µA each LDO
• Tight load and line regulation
• Thermal shutdown and current limit protection
• “Zero” off-mode current
• TTL logic-controlled enable input
• 10-pin MSOP package

Applications
• Cellular phones and pagers
• Cellular accessories
• Battery-powered equipment
• Laptop, notebook, and palmtop computers
• Consumer/personal electronics