| 数据搜索系统,热门电子元器件搜索 |
|
019L-15-R16-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() DigiKey | NBXSBA019LN1TAG | Rochester Electronics LLC | IC OSC XTAL 250MHZ 6-CLCC RoHS : Unknown |
| 11,529 | |
| NBXHBA019LN1TAG | Rochester Electronics LLC | IC OSC XTAL 250MHZ 6-CLCC RoHS : Unknown |
| 5,471 | ||
| 10046971-019LF | Amphenol Communications Solutions | CONN EDGE DUAL FML 50POS 0.100 RoHS : Compliant |
| 1,389 | ||
| VDM506N019LSA | Viitor Semiconductor Co Ltd | 60V, Single N Channel MOSFET, RD |
| 300 | ||
| HW-10-19-L-S-1040-175-LL | JRH ELECTRONICS | STACKING BOARD CONNECTOR, LOCKIN |
| 134 | ||
| TSW-120-19-L-D | JRH ELECTRONICS | CONN HDR .100" 40POS |
| 126 | ||
| ZW-10-19-L-S-965-220 | JRH ELECTRONICS | CONN BRD STACK .100" 10POS |
| 121 | ||
| DW-10-19-L-D-938 | JRH ELECTRONICS | CONN HDR 20POS 0.1 STACK T/H |
| 110 | ||
| HTSW-130-19-L-S | JRH ELECTRONICS | PIN HEADER, BOARD-TO-BOARD, 2.54 |
| 61 | ||
| TSW-110-19-L-S | JRH ELECTRONICS | PIN HEADER, BOARD-TO-BOARD, 2.54 |
| 50 | ||
| ZW-30-19-L-D-875-160 | JRH ELECTRONICS | CONN BRD STACK .100" 60POS |
| 30 | ||
M2019LL1W03![]() | NKK Switches | BUSHING MOUNT MINIATURE TOGGLE RoHS : Not Compliant |
| 14 | ||
| COH-1019LVC-200-30 | Taica Corporation | THERM PAD 200MMX200MM BLUE |
| 2 | ||
| COH-1019LVC-200-05 | Taica Corporation | THERM PAD 200MMX200MM BLUE |
| 1 | ||
| COH-1019LVC-400-05-1NT | Taica Corporation | THERM PAD 400X400MM BLUE |
| 1 | ||
![]() Newark | SUM90P10-19L-E3 | Vishay Intertechnologies | MOSFET, P CHANNEL, -100V, 90A TO-263; RoHS : Compliant |
| 3,823 | |
| SUM90P10-19L-E3 | Vishay Intertechnologies | MOSFET, P CHANNEL, -100V, 90A TO-263; RoHS : Compliant |
| 3,823 | ||
| SQM100P10-19L_GE3 | Vishay Intertechnologies | MOSFET, P-CH, 100V, 93A, 175DEG C, 375W; RoHS : Compliant |
| 1,691 | ||
| SQM100P10-19L_GE3 | Vishay Intertechnologies | MOSFET, P-CH, 100V, 93A, 175DEG C, 375W; RoHS : Compliant |
| 1,691 | ||
| 10073456-019LF | Amphenol Communications Solutions | CONN, HEADER, 20POS, 2ROW, 2.54MM; Connector Systems:Wire-to-Board; Pitch Spacing:2.54mm; No. of Rows:2Rows; No. of Contacts:20Contacts; Contact Termination Type:Press Fit; Product Range:Quickie 10073456 Series RoHS Compliant: Yes RoHS : Compliant |
| 535 | ||
| SQM100P10-19L_GE3 | Vishay Intertechnologies | MOSFET, P-CH, 100V, 93A, TO-263; Channel Type:P Channel; Drain Source Voltage Vds:100V; Continuous Drain Current Id:93A; Transistor Mounting:Surface Mount; Rds(on) Test Voltage:10V; Gate Source Threshold Voltage Max:2V RoHS Compliant: Yes RoHS : Compliant |
| 445 | ||
| DW-10-19-L-D-780 | Samtec Inc | CONN STACK BRD, 2.54MM, 20POS, HDR; RoHS : Compliant |
| 272 | ||
| DW-10-19-L-D-938 | Samtec Inc | CONN STACK BRD, 2.54MM, 20POS, HDR; RoHS : Compliant |
| 167 | ||
| DW-10-19-L-D-1060 | Samtec Inc | CONN STACK BRD, 2.54MM, 20POS, HDR; RoHS : Compliant |
| 167 | ||
| 65043-019LF | Amphenol Communications Solutions | CONNECTOR HOUSING, RCPT, 36POS, 2.54MM; Product Range:Mini-PV 65043 Series; Gender:Receptacle; No. of Positions:36Positions; Pitch Spacing:2.54mm; For Use With:Amphenol Mini-PV Series 22-36 Gauge Wire Terminals RoHS Compliant: Yes RoHS : Compliant |
| 112 | ||
| DW-20-19-L-D-625 | Samtec Inc | CONN STACK BRD, 2.54MM, 40POS, HDR; RoHS : Compliant |
| 110 | ||
| DW-20-19-L-D-790 | Samtec Inc | CONN STACK BRD, 2.54MM, 40POS, HDR; RoHS : Compliant |
| 110 | ||
| DW-40-19-L-D-650 | Samtec Inc | CONN STACK BRD, 2.54MM, 80POS, HDR; RoHS : Compliant |
| 56 | ||
| 65846-019LF | Amphenol Communications Solutions | CONNECTOR HOUSING, RCPT, 26POS, 2.54MM; RoHS : Compliant |
| 33 | ||
| M12883/40-19 LC | Amphenol PCD | RELAY SOCKET, 14 POS, 10A, PANEL; Socket Mounting:Panel; Socket Terminals:Stud; No. of Pins:14Pins; Current Rating:10A; Voltage Rating:-; Product Range:RSE Series RoHS Compliant: No RoHS : Not Compliant |
| 13 | ||
![]() RS | D22019LP![]() | NKK Switches | SWITCH, MINI TOGGLE, SPDT, ON-OFF-(ON),LOCKING LEVER, STRAIGHT PC,0.4VA,48VAC/DC RoHS : Compliant |
| 0 | |
| 1301-9LA | Arrow Hart | SWITCH TOGGLE SP 15A 120V AG LA |
| 0 | ||
| H6A10-19L | Leviton Manufacturing Co | PCORD CAT 6A HIGH-FLEX 19 FT (5.7M) BU |
| 0 | ||
| 66925019LF | Amphenol FCi | 30 GOLD CARD CONN |
| 0 | ||
M2019LL1W03![]() | NKK Switches | SWITCH, TOGGLE, SPDT, ON-OFF-(ON),.201 LOCKING LEVER,6A,125VAC,.250 STRAIGHT PC RoHS : Not Compliant |
| 0 | ||
| PBFS19019LG2 | Hammond Manufacturing | PANEL FRONT 19.2X19X0.5" GREY |
| 0 | ||
| 74233-1019LF | Amphenol FCi | USB-74233-1019LF RoHS : Compliant |
| 0 | ||
| S4630-19LW-34 | SOURIAU-SUNBANK | ALUMINUM & BRONZE BACKSHELLS |
| 0 | ||
| 10046971-019LF | Amphenol FCi | POWER EDGE CARD VR 25PX2-10046971-019LF RoHS : Compliant |
| 0 | ||
| NBXDPA019LNHTAG | onsemi | NBXDPA019LNHTAG, SILICON OSCILLATOR, 250MHZ, 6-PIN CLCC RoHS : Compliant |
| 0 | ||
SUM90P10-19L-E3![]() | Vishay Siliconix | 100V 90A 375W 19MOHM @ 10V RoHS : Contact Manufacturer |
| 0 | ||
| 1014760600019LF | Amphenol FCi | MINITEK1.0 R/A SMT HDR-10147606-00019LF |
| 0 | ||
| 10119109510019LF | Amphenol FCi | BERGSTIK II DR |
| 0 | ||
| 10119109210019LF | Amphenol FCi | 10119109-210019LF |
| 0 | ||
| LS1541-01-BL-BL-024 (RLS-00006019|LS1541-01-BL-BL-024|LS154101BLBL024) | Carling Technologies | ROCKER SWITCH, SP, ILLUMINATED, LS-SERIES |
| 0 | ||
![]() Microchip Technology Inc | BR230D-290A1-28V-019L | Microchip Technology Inc | 4PDT 10 AMP SUPRESSED RELAY QPL M83536/16-019L, Projected EOL: 2050-08-17 RoHS : Compliant |
| 22 | |
| BR246D-320C1-28V-019L | Microchip Technology Inc | 2PDT 10 AMP SUPRESSED RELAY QPL M83536/10-019L, Projected EOL: 2050-08-17 RoHS : Compliant |
| 8 | ||
| M83536/9-019L | Microchip Technology Inc | 2PDT 10 AMP RELAY QPL BR246-320C1-28V-019L, Projected EOL: 2050-08-17 - Contact for Pricing | 0 | |||
| M83536/10-019L | Microchip Technology Inc | 2PDT 10 AMP SUPRESSED RELAY QPL BR246D-320C1-28V-019L, Projected EOL: 2050-08-17 - Contact for Pricing | 0 | |||
| M83536/15-019L | Microchip Technology Inc | 4PDT 10 AMP RELAY QPL BR230-290A1-28V-019L, Projected EOL: 2050-08-17 - Contact for Pricing | 0 | |||
| M83536/16-019L | Microchip Technology Inc | 4PDT 10 AMP SUPRESSED RELAY QPL BR230D-290A1-28V-019L, Projected EOL: 2050-08-17 - Contact for Pricing | 0 | |||
| BR230-290A1-28V-019L | Microchip Technology Inc | 4PDT 10 AMP RELAY QPL M83536/15-019L, Projected EOL: 2050-08-17 RoHS : Compliant |
| 0 | ||
| BR246-320C1-28V-019L | Microchip Technology Inc | 2PDT 10 AMP RELAY QPL M83536/9-019L, Projected EOL: 2050-08-17 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 2-019 LM100-70 | O-RINGS | 335 | |||
| 42-1019-LFSM | Birtcher Products | 24 | ||||
| DW-20-19-L-D-900 | Samtec Inc | RoHS : Compliant | 4 | |||
| TSW-130-19-L-T | Samtec Inc | RoHS : Compliant | 2 | |||
![]() Rochester Electronics | NBXSBA019LN1TAG | onsemi | Clock Generator, 250MHz, CMOS, CDSO6 RoHS : Compliant |
| 11,529 | |
| NBXHBA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant |
| 5,471 | ||
| SMBZ10-19LT1 | onsemi | Zener Diode RoHS : Not Compliant |
| 21,000 | ||
| NBXSBA019LNHTAG | onsemi | Clock Generator, 250MHz, CMOS, CDSO6 RoHS : Compliant |
| 1,542 | ||
| NBXDBA019LNHTAG | onsemi | LVPECL Output Clock Oscillator, 250MHz Nom RoHS : Compliant |
| 21 | ||
| NBXDBA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant |
| 7,293 | ||
| LV8019LP-TLM-E | onsemi | Motion Control Electronic, BICMOS, PQCC24 RoHS : Compliant |
| 38,000 | ||
| NBVSPA019LNHTAG | onsemi | LVDS Output Clock Oscillator, 125MHz Nom RoHS : Compliant |
| 14 | ||
| LV8019LP-TLM-E | SANYO Semiconductor Co Ltd | Motion Control Electronic, BICMOS, PQCC24 RoHS : Compliant |
| 26,000 | ||
![]() TME | 65461-019LF | Amphenol Corporation | 65461-019LF |
| 1,769 | |
| SQM100P10-19L_GE3 | Vishay Intertechnologies | Transistor: P-MOSFET; unipolar; -100V; -53A; 125W; D2PAK,TO263 RoHS : Compliant |
| 800 | ||
| 65801-019LF | Amphenol Corporation | Connector: FFC/FPC; tinned; 2A; PIN: 19; Mat: polypropylene; ZIF |
| 768 | ||
| 10073456-019LF | Amphenol Corporation | Connector: IDC; plug; male; PIN: 20; Quickie; straight; THT; on PCBs |
| 485 | ||
| SUM90P10-19L-E3 | Vishay Intertechnologies | Transistor: P-MOSFET; TrenchFET®; unipolar; -100V; -90A; Idm: -90A RoHS : Compliant |
| 429 | ||
| 10121067-1019LF | Amphenol Corporation | Connector: DIN 41612; female; PIN: 112; straight; Press-Fit |
| 315 | ||
| 65846-019LF | Amphenol Corporation | Connector: wire-board; socket; female; PIN: 26; Mini-PV™; straight |
| 103 | ||
| 65240-019LF | Amphenol Corporation | Connector: wire-board; socket; female; PIN: 19; straight; crimped |
| 100 | ||
| 10128419-1019LF | Amphenol Corporation | Connector: DIN 41612; female; PIN: 112; angled; Press-Fit |
| 84 | ||
| GEN-40-19/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 2 | ||
| GENH40-19-LAN/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 0 | ||
| GN20019L | Lovato Electric Inc | Switch: cam switch Dahlander; Stabl.pos: 3; 200A; 0-1-2; Pos: 3 |
| 0 | ||
| GENH-40-19/LN | TDK-Lambda Corporation | Laboratory power supply: programmable; single-channel; 0÷40VDC |
| 0 | ||
![]() ComSIT USA | SUM90P1019LE3 | Vishay Intertechnologies | AVAILABLE EU | 111 | ||
![]() ComSIT USA | VP8019LF | lb | Electronic Component RoHS : Not Compliant | 345 | ||
| SUM90F1019LE3 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 275 | |||
![]() Interstate Connecting Components | M83536/2-019L | TE Connectivity | Mid Range FCB-205 FCB-205-0219L=M83536/2-019L RoHS : Not Compliant |
| 11 | |
| 449AS001P0804-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001P2822-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AM001NF1207-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AN001NF1407-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001NF1006-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 10046971-019LF | Amphenol FCi | OEM ITEM 517-52XF-EDGE CARD CONNEC RoHS : Compliant |
| 0 | ||
| 449AS001P2216-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 74233-1019LF | Amphenol FCi | 74233-1019LF-USB RoHS : Compliant |
| 0 | ||
| 66987-019LF | Amphenol FCi | DUFLEX HSNG DR .100-66987-019L RoHS : Compliant | 0 | |||
| 449AN001NF1206-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 449AS001P0806-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| M85049/90-19L03 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/90-19L03 | Amphenol PCD | M8504990-19L03 | 0 | |||
| 449AM001NF2014-01-9L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
![]() PEI Genesis | S4630-19LW-34 | SOURIAU-SUNBANK |
| 0 | ||
| MDM-15PH019L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-37PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-15PH019L | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MDM-15SH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31SH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-51SH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25SH019L-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-15PH019L-A174-F222 | ITT Interconnect Solutions |
| 0 | |||
| MDM-31SH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-31PH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-51PH019L | ITT Interconnect Solutions |
| 0 | |||
| MDM-100PH019L-A174 | ITT Interconnect Solutions |
| 0 | |||
| MDM-25PH019L | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | TSW-120-19-L-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 126 | |
| ZW-10-19-L-S-965-220 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 121 | ||
| DW-10-19-L-D-938 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 110 | ||
| DW-10-19-L-D-1060 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 110 | ||
| DW-10-19-L-D-984 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 110 | ||
| HTSW-120-19-L-D | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 110 | ||
| DW-10-19-L-D-1000 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 110 | ||
| DW-10-19-L-D-1053 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 110 | ||
| DW-20-19-L-D-625 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 73 | ||
| HTSW-130-19-L-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 61 | ||
| ZW-50-19-LM-S-910-170 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 51 | ||
| DW-40-19-L-D-650 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 37 | ||
| ZW-30-19-L-D-875-160 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 30 | ||
M2019LL1W03![]() | NKK Switches | BUSHING MOUNT MINIATURE TOGGLE RoHS : Not Compliant |
| 9 | ||
D22019LP![]() | NKK Switches | PCB MOUNT MINIATURE TOGGLE RoHS : Compliant |
| 9 | ||
![]() Richardson RFPD | EVAL01-HMC1019LP4E | Analog Devices Inc | HMC1019LP4E Digital Attenuator Evaluation Board RoHS : Compliant | 0 | ||
![]() Chip 1 Exchange | SUM90P10-19L-E3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 8,538 | ||
| SUM90P1019LE3 | INSTOCK | 3,829 | ||||
| VP8019LF | Bothhand Usa | INSTOCK | 2 | |||
![]() Component Electronics, Inc | TSW-150-19-L-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 890 | |
| EW-30-19-L-D-800-LL | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 125 | ||
| 019L5 | General Instrument | IN STOCK SHIP TODAY | 80 | |||
| HW-50-19-L-D-800-140 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 70 | ||
![]() EBV Elektronik | SUM90P10-19L-E3 | Vishay Intertechnologies | Power MOSFET P Channel 100 V 90 A 19 MilliOhms TO263 D2PAK 3 Pins Surface Mount (Alt: SUM90P10-19L-E3) RoHS : Compliant | 28,800 | ||
| SQM100P10-19L_GE3 | Vishay Intertechnologies | (Alt: SQM100P10-19L_GE3) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M83536/10-019L | DRI Relays Inc | Relays | 0 | ||
| M39016/23-019L | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| M28776/1-019L | TE Connectivity | Relays |
| 0 | ||
| M83536/2-019L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M83536/2-019L | DRI Relays Inc | Relays | 0 | |||
| M83536/35-019L | DRI Relays Inc | Relays | 0 | |||
| M39016/24-019L | TE Connectivity | Relays | 0 | |||
| M39016/10-019L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M39016/11-019L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M83536/16-019L | DRI Relays Inc | Relays | 0 | |||
| M83536/16-019L | Leach International Corporation | Relays | 0 | |||
| M39016/9-019L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M83536/5-019L | DRI Relays Inc | Relays | 0 | |||
![]() Master Electronics | S1SS-05-28-GF-30.19-L3 | Samtec Inc | RoHS : Compliant |
| 0 | |
| HTSW-110-19-LM-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-370 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-820 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-10-19-L-D-938 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-10-19-L-S-915 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-20-19-L-D-1020 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-20-19-L-S-930 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-30-19-L-S-775 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-30-19-L-S-900 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-40-19-L-D-1020 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-40-19-L-D-650 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-40-19-L-D-975 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-40-19-L-S-790 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-50-19-L-D-990 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03019LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Low Loss Cable Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 5,750 | ||
| PE3W03019LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Female Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-12 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-12 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,150 | ||
| PE3W03019LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Female Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,150 | ||
| PE3W03019LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Female Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 36 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,150 | ||
| PE3W03019LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Female Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N female low loss cable 24 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N female low loss cable 24 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W03019LF/HS-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03019LF/HS-24 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3W03019LF/HS-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03019LF/HS-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,150 | ||
| PE3W20019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SHV Jack to SHV Plug Cable Using RG223 Coax, LF Solder. PE3W20019LF is a SHV jack to SHV plug cable using RG223 coax. This Pasternack SHV jack to SHV plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our jack SHV to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20019LF SHV jack to SHV plug cable assembly is constructed with RG223 coax. | 0 | |||
| PE37019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. MCX Plug to SMA Male Cable Using RG196 Coax, LF Solder., Radio frequency assembly MCX plug to SMA male cable using RG196 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug to SMA male cable using RG196 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and SMA cable connection on the other. Our MCX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MCX to SMA cable is a plug to male coax assembly, PE37019LF, can also be known as a MCX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MCX male to SMA plug cable assembly PE37019LF is built with RG196 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MCX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37019LF can also be used in the other direction and will be SMA male to MCX plug cable assembly if the opposite connectivity is required. MCX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to SMA male cable using RG196 coax, LF solder. | 0 | |||
| PE3W10019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-500, RF Cable Type: SPO-500, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using SPO-500 Coax, LF Solder. PE3W10019LF is a N male to N male cable using SPO-500 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W10019LF N male to N male cable assembly is constructed with SPO-500 coax. | 0 | |||
| PE3W14019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using LMR-400-DB Coax with HeatShrink, LF Solder. PE3W14019LF/HS is a N male to SMA male cable using LMR-400-DB coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14019LF/HS N male to SMA male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SHV Jack to Banana Plug Cable Using RG142 Coax with HeatShrink, LF Solder. PE3W16019LF/HS is a SHV jack to Banana plug cable using RG142 coax. This Pasternack SHV jack to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a Banana for connector 2. Our jack SHV to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16019LF/HS SHV jack to Banana plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W05019LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using RG174 Coax with HeatShrink, LF Solder, RoHS. PE3W05019LF/HS is a N male to SMA male cable using RG174 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05019LF/HS N male to SMA male cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W23019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using RG400 Coax, LF Solder. PE3W23019LF is a N male to N female bulkhead cable using RG400 coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23019LF N male to N female bulkhead cable assembly is constructed with RG400 coax. | 0 | |||
| PE3C1019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Cable Using RG178 Coax, LF Solder. PE3C1019LF is a SMP female right angle to SMP female cable using RG178 coax. This Pasternack SMP female right angle to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1019LF SMP female right angle to SMP female cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W10019LF/HS | Pasternack Enterprises | 0 | ||||
| PE3C2019LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to BNC Male Cable Using RG316 Coax, LF Solder. PE3C2019LF is a 1.0/2.3 plug to BNC male cable using RG316 coax. This Pasternack 1.0/2.3 plug to BNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm BNC for connector 2. Our plug 1.0/2.3 to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2019LF 1.0/2.3 plug to BNC male cable assembly is constructed with RG316 coax. | 0 | |||
![]() Sager | ZW-10-19-L-S-965-220 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 184 | |
| DW-10-19-L-D-938 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 167 | ||
| DW-10-19-L-D-1060 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 167 | ||
| DW-10-19-L-D-984 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 167 | ||
| DW-20-19-L-D-625 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 110 | ||
| DW-40-19-L-D-650 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 56 | ||
| ZW-30-19-L-D-875-160 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 45 | ||
| TSW-130-19-L-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-140-19-L-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| DW-20-19-L-T-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-40-19-L-D-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-40-19-L-Q-450 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HTSW-150-19-L-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LCW-110-19-L-S-300-RP | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LCW-120-19-L-M-230-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() Vyrian | NBVSPA019LN1TAG | onsemi | LVDS Output Clock Oscillator, 60MHz Min, 700MHz Max, 125MHz Nom RoHS : Compliant | 13,384 | ||
| NBXSBA019LN1TAG | onsemi | Clock Generator, 250MHz, CMOS, CDSO6 RoHS : Compliant | 10,808 | |||
| HMC1019LP4E | Analog Devices Inc | Variable Attenuator, 100MHz Min, 30000MHz Max, 6.5dB Insertion Loss-Max, GAAS RoHS : Compliant | 10,438 | |||
| HTSW-120-19-L-S | Samtec Inc | Board Connector, 20 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Natural Insulator RoHS : Compliant | 9,321 | |||
| NBXHGA019LNHTAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant | 8,627 | |||
| RCWE102019L6FKEA | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 2W, 0.0196ohm, 0.198V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1020 RoHS : Compliant | 8,230 | |||
| NBXHBA019LN1TAG | onsemi | Clock Generator, 125MHz, CMOS, CDSO6 RoHS : Compliant | 7,602 | |||
| TSW-120-19-L-S | Samtec Inc | Board Connector, 20 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 7,315 | |||
| NBXDPA019LNHTAG | onsemi | LVDS Output Clock Oscillator, 125MHz Nom RoHS : Compliant | 6,379 | |||
MT5C1601-9L![]() | Micron Technology Inc | Standard SRAM, 16KX1, 9ns, CMOS, PDIP20 RoHS : Not Compliant | 6,168 | |||
| BR246D-320C1-28V-019L | Microchip Technology Inc | Electromechanical Relay, DPDT, 29VDC (Coil), 10A (Contact), 28VDC (Contact), Random, AC/DC Output RoHS : Not Compliant | 5,794 | |||
| M83536/10-019L | Microchip Technology Inc | Power/Signal Relay, DPDT, Momentary, 0.1A (Coil), 28VDC (Coil), 2800mW (Coil), 10A (Contact), 28VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount | 5,445 | |||
MT5C6401-9LIT![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 | 5,212 | |||
| 10046971-019LF | Amphenol Communications Solutions | Card Edge Connector, 50 Contact(s), 2 Row(s), Female, Straight, Solder Terminal | 3,429 | |||
MT5C6401-9L![]() | Micron Technology Inc | Standard SRAM, 64KX1, 9ns, CMOS, PDIP22 RoHS : Not Compliant | 2,874 | |||
![]() Win Source Electronics | 10046971-019LF | Amphenol Corporation | CONN EDGE DUAL FMALE 50POS 0.100 |
| 32,499 | |
| SUM90P10-19L | Vishay Huntington | P-Channel 100-V (D-S) MOSFET |
| 30,356 | ||
| SUM90P10-19L-E3 | Vishay Huntington | MOSFET P-CH 100V 90A D2PAK |
| 14,400 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |