| 数据搜索系统,热门电子元器件搜索 |
|
02PL02FST50 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() Braemac Americas-Symmetry | WH-02PH02PH-200 | Nipron Co |
| 0 | ||
| EV-WT02P40P | Fanstel Corporation | Evaluation board for WT02P40P |
| 0 | ||
| WH-C02PH-500 | Nipron Co |
| 0 | |||
| WT02P40P | Fanstel Corporation | nRF5340 BLE 5.4 and nRF7002 WiFi 6 combo modules, pads for 2 antennas |
| 0 | ||
| EV-WM02P | Fanstel Corporation | Evaluation board for WM02P |
| 0 | ||
| WM02P | Fanstel Corporation | Companion nRF7002 WiFi 6 module, pads for external antenna |
| 0 | ||
| MPU101-302-P05B301 | Sinpro Electronics Co Inc | DC cable: 4 ft DC plug: 5 pin connector 5 years warranty |
| 0 | ||
![]() Flip Electronics | NTR4502PT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 568,000 | ||
NTR4502PT1![]() | onsemi | Stock RoHS : Not Compliant | 568,000 | |||
| FDC6302P | onsemi | Stock, Ship Today RoHS : Compliant |
| 327,000 | ||
| NTMFD0D9N02P1E | onsemi | Stock, Ship Today RoHS : Compliant |
| 158,223 | ||
| FDV302P_NB8V001 | onsemi | Stock | 116,217 | |||
| NTHD4102PT1 | onsemi | Stock RoHS : Not Compliant | 42,000 | |||
NTR0202PLT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 35,380 | |||
| NTMFS0D8N02P1ET1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 23,128 | ||
NVTR4502PT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 9,000 | |||
| NTMFD1D4N02P1E | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,900 | ||
| MC68LC302PU16CT | NXP Semiconductors | Stock | 6,504 | |||
| MC68LC302PU16VCT | NXP Semiconductors | Stock | 5,727 | |||
| NC7S02P5X-L22057 | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
| FDC602P | onsemi | Stock, Ship Today RoHS : Compliant | 578 | |||
| FM25V02-PG | Infineon Technologies AG | Stock, Ship Today |
| 9 | ||
![]() Master Electronics | 10-169214-02P | Amphenol Industrial Operations | Circular Connector Receptacle - Male Pins - 4 Position - 0.750 (19.05mm) Cable Opening - 14S-2 Shell Size - MS3102E Series - Solder Cup - Olive Drab. RoHS : Not Compliant |
| 421 | |
| 102-PSB/670A-02-PSB | Marathon Special Products | Conn Barrier Strip 4 POS Screw Panel Mount 20A RoHS : Compliant |
| 1 | ||
| TMS-SCE-1/2-2.0-2-PB-CS778 | TE Connectivity | TMS-SCE Military Grade Heat Shrinkable Wire Identification Sleeve - 3: 1 Shrink Ratio - 1/2 Inch Inside Diameter - Red. MOQ Reduction RoHS : Compliant |
| 0 | ||
| TSM-102-04-L-SV-002-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSM-103-03-T-SH-002-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSM-105-01-T-SV-002-P-TR | Samtec Inc | Conn Unshrouded Header HDR 5 POS 2.54mm Solder ST SMD T/R RoHS : Compliant |
| 0 | ||
| TSM-107-01-L-SV-002-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TST02PH00 | ITT Interconnect Solutions | TST02PH00; Trident; Trident RoHS : Compliant |
| 0 | ||
T102P3T9V3BE![]() | C&K Switches | Subminiature Toggle Switch RoHS : Compliant |
| 0 | ||
| SMM-108-02-S-D-02-P | Samtec Inc | Conn Socket Strip SKT 16 POS 2mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| SMM-110-02-S-D-02-P-TR | Samtec Inc | 2MM SOCKET STRIPS RoHS : Compliant |
| 0 | ||
| MC8017-B-11-02PN | TE Connectivity | ARINC 801 TYPE 1 JAM NUT CONNECTOR MOQ Reduction RoHS : Compliant |
| 0 | ||
| DTS23H23-02PB | TE Connectivity | DTS23H23-02PB MOQ Reduction RoHS : Compliant |
| 0 | ||
| DTS24T11-02PE-6157[V001] | TE Connectivity | RECP ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| EJH-105-01-S-D-SM-LC-02-P | Samtec Inc | .100 Shrouded IDC Ejector Header RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 90HBW02PRT | Grayhill Inc | Switch DIP ON OFF SPST 2 Recessed Slide 0.1A 30VDC Gull Wing 2000Cycles 2.54mm SMD T/R RoHS : Compliant |
| 50 | |
| SFSD064GN1PT1TB-I-7G-02P-SW4 | Swissbit | Memory Cards Industrial microSD Card, PS-66u DP 64 GB, 3D PSLC Flash, -40C to +85C |
| 23 | ||
| AB6E-3BV02PTRH | IDEC Corporation | Switch, E-Stop, 16mm mnt hole, X6, 30mm btn, 2NC without markings RoHS : Compliant |
| 22 | ||
| CGE40-2P-40AN | Carlo Gavazzi Holding AG | Controls Relay Overloads, 100-260 VAC, 8-40A, Screw, 70 Deg C Max, CGE40 Series |
| 19 | ||
| BI2-Q5.5-AP6X-0.2-PSG3M/S34 | TURCK Inc | Inductive Prox Sensor,5.5mm X 8mm X 28mm Rectangular Plastic Body,2mm Range,DC |
| 9 | ||
| 62V22-02-P | Grayhill Inc | Encoders 62V22-02-P RoHS : Compliant |
| 7 | ||
| 62R15-02-P | Grayhill Inc | Encoders 62R15-02-P RoHS : Compliant |
| 5 | ||
| RJR26FW502P | Bourns Inc | Trimmer Resistors - Through Hole 100ppm 5Kohms 12 TURNS NOM. RoHS : Not Compliant |
| 3 | ||
CA02P![]() | XP Power | Non-Isolated DC/DC Converters SINGLE O/P, DC-HV DC PCB MOUNT, 1W,+200V RoHS : Compliant |
| 0 | ||
| SFSD064GN1PT1MT-I-7G-02P-SW4 | Swissbit | Memory Cards Secure microSD Card PS-66u DP high endurance 64 GB, 3D PSLC Flash -40C to +85C |
| 0 | ||
| APP480G1BN-02PTD | Apacer Technology Inc | Solid State Drives - SSD 480 GB - 3.3 V |
| 0 | ||
| SFSD016GL1PT1MT-I-5E-02P-SW4 | Swissbit | Memory Cards Secure SD Card, PS-66 DP (high endurance), 16 GB, 3D PSLC Flash, -40C to +85C |
| 0 | ||
AGH02P-5![]() | XP Power | Isolated DC/DC Converters SINGLE O/P, DC-HV DC PCB MOUNT, 1.5W, +200V RoHS : Compliant |
| 0 | ||
| G3CN202P1DC328 | OMRON Corporation | 100-240VAC Output 4 to 30 V DC Input Voltage Range PCB Solid State Relay |
| 0 | ||
| WTB250-2P2431 | SICK AG | PE Sensor, Prox BGS, Rectang W20mm, R: 0.1-0.3m, red light, 160Hz DC PNP L/D, 4pin M12 Conn, 6044675 |
| 0 | ||
![]() Pasternack Enterprises US | PE38502/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. UMCX Plug Right Angle to MCX Plug Right Angle Cable Using RG178 Coax with 180 Deg. Clock. PE38502/PH180 is a UMCX plug right angle to MCX plug right angle cable using RG178 coax. This Pasternack UMCX plug right angle to MCX plug right angle cable assembly uses a 50 Ohm UMCX for connector 1 and a 50 Ohm MCX for connector 2. UMCX right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug UMCX right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38502/PH180 UMCX plug right angle to MCX plug right angle cable assembly is constructed with RG178 coax. | 0 | ||
| PE3C1402/PH180 | Pasternack Enterprises | 0 | ||||
| PE3C100100-2P-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Push-On Mini SMP Female to SMA Male Cable 12 Inch Length Using PE-P047 Coax, 2 Position., Pasternack’s PE3C100100-2P-12 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2P-12 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2P-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This 2-position RF cable assembly is pre-installed into the connector housing. This PE3C100100-2P-12 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2P-12 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2P-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Push-On Mini SMP Female to SMA Male Cable 18 Inch Length Using PE-P047 Coax, 2 Position., Pasternack’s PE3C100100-2P-18 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2P-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2P-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This 2-position RF cable assembly is pre-installed into the connector housing. This PE3C100100-2P-18 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2P-18 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2P-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Push-On Mini SMP Female to SMA Male Cable 36 Inch Length Using PE-P047 Coax, 2 Position., Pasternack’s PE3C100100-2P-36 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2P-36 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2P-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This 2-position RF cable assembly is pre-installed into the connector housing. This PE3C100100-2P-36 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2P-36 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2P-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Push-On Mini SMP Female to SMA Male Cable 6 Inch Length Using PE-P047 Coax, 2 Position., Pasternack’s PE3C100100-2P-6 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2P-6 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2P-6 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This 2-position RF cable assembly is pre-installed into the connector housing. This PE3C100100-2P-6 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2P-6 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to SMA Male Cable 12 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-12 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-12 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-12 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-12 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to SMA Male Cable 18 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-18 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-18 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-18 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK1-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMPM Female to SMA Male Cable 24 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-24 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-24 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-24 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-24 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-24 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to SMA Male Cable 36 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-36 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-36 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-36 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-36 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK1-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMPM Female to SMA Male Cable 6 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-6 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-6 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-6 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-6 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-6 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK2-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to SMA Male Cable 12 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male Edge Mount Block., Pasternack’s PE3C100100-2PK2-12 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK2-12 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK2-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent block. This PE3C100100-2PK2-12 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK2-12 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK2-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to SMA Male Cable 18 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male Edge Mount Block., Pasternack’s PE3C100100-2PK2-18 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK2-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK2-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent block. This PE3C100100-2PK2-18 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK2-18 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK2-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMPM Female to SMA Male Cable 24 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male Edge Mount Block., Pasternack’s PE3C100100-2PK2-24 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK2-24 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK2-24 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent block. This PE3C100100-2PK2-24 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK2-24 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-2PK2-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to SMA Male Cable 36 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male Edge Mount Block., Pasternack’s PE3C100100-2PK2-36 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK2-36 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK2-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent block. This PE3C100100-2PK2-36 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK2-36 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Venkel Ltd. | TNTF0402-PN-1000BT | VENKEL LTD | TaN Thin Film CR;0402;1/16W;�10PPM;100R;�0.1% RoHS : Compliant | 0 | ||
| CRG0402-P-12R1FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;12.1R;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-132JT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;1.3K;�5% RoHS : Compliant | 0 | |||
| CRG0402-P-1331FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;1.33K;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-1782FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;17.8K;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-2673FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;267K ;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-2R20FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;2.2R;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-3320FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;332R;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-3401FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;3.4K;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-3483FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;348K ;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-38R3FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;38.3R;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-3R74FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;3.74R;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-5102FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;51K;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-5760FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;576R;�1% RoHS : Compliant | 0 | |||
| CRG0402-P-6200FT | VENKEL LTD | RoHS 10/10 Green CR;0402;1/16W;620R;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | VS-20ETF02PBF | Vishay Intertechnologies | Rectifier Diode, 1 Phase, 1 Element, 20A, 200V V(RRM), Silicon, TO-220AC RoHS : Compliant | 13,569 | ||
XC17V02PCG44I![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC44 RoHS : Compliant | 4,049 | |||
XC17V02PC20I![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC20 RoHS : Not Compliant | 3,946 | |||
XC17V02PCG20I![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC20 RoHS : Compliant | 3,793 | |||
XC1802PC44C![]() | AMD Xilinx | Configuration Memory, 2MX1, 45ns, Parallel, CMOS, PQCC44 RoHS : Not Compliant | 3,521 | |||
XC18V02PC44C0799![]() | AMD Xilinx | Configuration Memory, 256KX8, 20ns, Parallel/serial, CMOS, PQCC44 | 3,417 | |||
XC17V02PC44C![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC44 RoHS : Not Compliant | 2,461 | |||
XC18V02PC44C![]() | AMD Xilinx | Configuration Memory, 256KX8, 20ns, Parallel/serial, CMOS, PQCC44 RoHS : Not Compliant | 2,425 | |||
XC17V02PCG20C![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC20 RoHS : Compliant | 2,401 | |||
XC17V02PCG44C![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC44 RoHS : Compliant | 2,377 | |||
XC17V02PC20C![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC20 RoHS : Not Compliant | 2,023 | |||
XC1802PC44I![]() | AMD Xilinx | Configuration Memory, 2MX1, 45ns, Parallel, CMOS, PQCC44 RoHS : Not Compliant | 1,727 | |||
XC17V02PC44I![]() | AMD Xilinx | Configuration Memory, 2MX1, Serial, CMOS, PQCC44 RoHS : Not Compliant | 1,241 | |||
| VX60202PW-M3/P | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 2 Element, 30A, 200V V(RRM), Silicon, TO-247AD RoHS : Compliant | 716 | |||
| VS-KBPC802PBF | Vishay Intertechnologies | Bridge Rectifier Diode, 1 Phase, 8A, 200V V(RRM), Silicon RoHS : Compliant | 353 | |||
![]() Waytek, Inc. | 0287002.PXCN | Littelfuse Inc | 2 Amp ATOF Blade Type Fuse 32V Grey ATO RoHS : Compliant |
| 25,019 | |
| 99202-P6 | FTZ Industries | FTZ Industries 99202 Self Fusing Silicone Rubber Tape is black 1" x 20' self-fusing tape rated to 500F. It provides a permanent moisture seal, insulates and protects wires, harnesses, and splices, and is built for high-temperature sealing and repair applications. |
| 61 | ||
| ARB12-102PAR-L018 | Amphenol Sine Systems | 102 POS Receptacle, Pin, ARB Series,Threaded Insert for Jackscrew |
| 36 | ||
| 99502-P1000 | FTZ Industries | 1-1/2" Battery Terminal Bolt 5/16"-18 Zinc Plated |
| 0 | ||
![]() Win Source Electronics | 2N7002P | Nexperia | MOSFET 2N-CH 60V 0.32A 6TSSOP / Trans MOSFET N-CH 60V 0.36A Automotive 3-Pin SOT-23 RoHS : Compliant |
| 990,000 | |
NC7SZ02P5X![]() | Fairchild Semiconductor Corporation | IC GATE NOR 1CH 2-INP SC-70-5 RoHS : Compliant |
| 390,000 | ||
LM2902PWRG4![]() | Texas Instruments | IC OPAMP GP 1.2MHZ 14TSSOP RoHS : Compliant |
| 376,160 | ||
| 2N7002PT,115 | Nexperia | MOSFET N-CH 60V 0.31A SOT-416 |
| 137,845 | ||
| 2N7002PT | CHENMKO Enterprise Co Ltd | N-Channel Enhancement Mode Field Effect Transistor |
| 130,000 | ||
| ACT45B-110-2P-TL003 | TDK Corporation | CMC 11UH 250MA 2LN SMD AEC-Q200 RoHS : Compliant |
| 80,000 | ||
| 2N7002PS | Nexperia | Trans MOSFET N-CH 60V 0.32A Automotive 6-Pin TSSOP / 60 V, 320 mA N-channel Trench MOSFET RoHS : Compliant |
| 33,333 | ||
74HC02PW,118![]() | Nexperia | IC GATE NOR 4CH 2-INP 14TSSOP / NOR Gate IC 4 Channel 14-TSSOP RoHS : Compliant |
| 32,500 | ||
6EDL04N02PR![]() | Infineon Technologies AG | High voltage gate driver IC RoHS : Compliant |
| 18,000 | ||
XC6202P502PR![]() | Torex Semiconductor LTD | High Voltage Positive Voltage Regulators RoHS : Compliant |
| 17,625 | ||
| DRV602PWRG4 | Texas Instruments |
| 10,000 | |||
| 0287002.PXCN | Littelfuse Inc | FUSE AUTO 2A 32VDC BLADE / ATOF™ Blade Fuse Rated 32V RoHS : Compliant |
| 8,000 | ||
PCM5102PW![]() | Texas Instruments | IC DAC 16/24/32BIT 384K 20TSSOP RoHS : Compliant |
| 2,877 | ||
DS2502P-E48+T&R![]() | Maxim Integrated Products | IC EPROM 1KBIT 1-WIRE 6TSOC RoHS : Compliant |
| 950 | ||
| BQ7694202PFBR | Texas Instruments | 3-SERIES TO 10-SERIES MULTICELL / Battery Multi-Function Controller IC LiFePO4/Li-ion 48-TQFP (7x7) RoHS : Compliant |
| 900 | ||
![]() Wuhan P&S | NTHD4102PT1G | onsemi | Power MOSFET 20 V, Dual P-Channel RoHS : Compliant |
| 30,000 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |