0603C-R11K Price, 销售商, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male cable 60 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C0060-60, can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0060-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 60 inch length using LMR-195 coax.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

1,343

PE3W06099/PH90-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. MMCX Plug Right Angle to MCX Plug Right Angle Cable 60 Inch Length Using RG188-DS Coax with 90 Deg. Clock., Radio frequency assembly MMCX plug right angle to MCX plug right angle cable 60 inch length using RG188-DS coax with 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MCX plug right angle cable 60 inch length using RG188-DS coax with 90 deg. clock, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle MMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W06099/PH90-60 can also be known as a right angle MMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MCX male cable assembly PE3W06099/PH90-60 is built with RG188-DS which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06099/PH90-60 can also be used in the other direction and will be right angle MCX plug to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MCX plug right angle cable 60 inch length using RG188-DS coax with 90 deg. clock.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

270

PE3W06020-60

Pasternack Enterprises

Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 60 inches. Banana Plug to SMA Male Cable 60 Inch Length Using RG188-DS Coax., Radio frequency assembly banana plug to SMA male cable 60 inch length using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Banana plug to SMA male cable 60 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom banana to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with banana cable connection on one end and SMA cable connection on the other. Our banana to SMA cable assemblies have a plug gender on end 1 and male on end 2. This banana to SMA cable is a plug to male coax assembly, PE3W06020-60, can also be known as a banana male to SMA plug cable assembly and will be shipped same-day as it is purchased. Banana male to SMA plug cable assembly PE3W06020-60 is built with RG188-DS which is a flexible coax type. The Pasternack flexible Banana cable assembly is manufactured with banana to SMA cable connectors, has a impedance and is double shielded. RF specs on this banana plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06020-60 can also be used in the other direction and will be SMA male to banana plug cable assembly if the opposite connectivity is required. Banana male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality banana to SMA cable assembly for quick shipment worldwide. Variations of banana cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this banana plug to SMA male cable 60 inch length using RG188-DS coax.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

270

PE3M0060-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 BNC Male to N Female Bulkhead Cable 60 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to N female bulkhead cable 60 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to N female bulkhead cable 60 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/03-0503 N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/03-0503 type N bulkhead cable connection on the other. Our M39012/16-0014 BNC to M39012/03-0503 type N cable assemblies have a male gender on end 1 and female on end 2. This M39012/16-0014 BNC to M39012/03-0503 type N cable is a male to female coax assembly, PE3M0060-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to M39012/03-0503 N type jack cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/03-0503 type N jack cable assembly PE3M0060-60 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/03-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/03-0503 type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0060-60 can also be used in the other direction and will be M39012/03-0503 N type female bulkhead to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/03-0503 type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/03-0503 N type cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to N female bulkhead cable 60 inch length using M17/128-RG400 coax.

1 : $299.99
25 : $284.99
50 : $269.99

125

PE3C5060-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly SMA male right angle to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a SMA cable connection on one end and a TNC cable connection on the other. Our low loss right angle a SMA to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C5060-60 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5060-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. SMA plug to TNC plug cable assembly PE3C5060-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5060-60 can also be used in the other direction and will be TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE3MP2060-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRB Jack to Blunt Cut Genderless 1553 Cable 60 Inch Length Using 78 Ohm M17/176-00002 Coax., Radio frequency assembly TRB jack to blunt cut genderless 1553 cable 60 inch length using 78 Ohm M17/176-00002 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB jack to blunt cut genderless 1553 cable 60 inch length using 78 Ohm M17/176-00002 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2060-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2060-60 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2060-60 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB jack to blunt cut genderless 1553 cable 60 inch length using 78 Ohm M17/176-00002 coax.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3M0440-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Pin to MIL Size 8 Contact Socket Cable 60 Inch Length Using PE-141FL-NM Coax with Heat Shrink, LF Solder. The PE3M0440-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0440-60 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0440-60 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. M39029 pin to M39029 socket cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0440-60 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $162.99
10 : $156.47
25 : $149.95
100 : $143.43

PE3W08060-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. 3.5mm Female to 2.92mm Male Cable 60 Inch Using PE-SR402AL Coax., Radio frequency assembly 3.5mm female to 2.92mm male cable 60 inch using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to 2.92mm male cable 60 inch using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 2.92mm cable connection on the other. Our 3.5mm to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. This 3.5mm to 2.92mm cable is a female to male coax assembly, PE3W08060-60, can also be known as a 3.5mm jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to 2.92mm plug cable assembly PE3W08060-60 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 36 GHz maximum frequency 3.5mm female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08060-60 can also be used in the other direction and will be 2.92mm male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to 2.92mm male cable 60 inch using PE-SR402AL coax.

1 : $323.99
25 : $307.79
50 : $291.59
100 : $278.63

PE3W06060/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to SMA Female Cable Using LMR-195 Coax with HeatShrink. PE3W06060/HS is a BNC male to SMA female cable using LMR-195 coax. This Pasternack BNC male to SMA female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06060/HS BNC male to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W06060

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female to BNC Male Cable Using LMR-195 Coax. PE3W06060 is a SMA female to BNC male cable using LMR-195 coax. This Pasternack SMA female to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06060 SMA female to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C8060-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 60 inches.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3MSA00600-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. LSZH TRB Threaded Plug to 3-Lug TRB Non-Insulated Bulkhead Jack for TWCH-78-2, 60" Twinax Cable., Radio frequency assembly LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 60" twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 60" twinax cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00600-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00600-60 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00600-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH TRB threaded plug to 3-Lug TRB non-insulated bulkhead jack for TWCH-78-2, 60" twinax cable.

1 : $363.99
25 : $345.79
50 : $327.59
100 : $313.03

PE3C3250-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to N Female Low Loss Test Cable 60 Inch Length Using PE-P300LL Coax., Radio frequency assembly SMA male right angle to N female low loss test cable 60 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N female low loss test cable 60 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our low loss test right angle SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C3250-60, can also be known as a low loss test right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3250-60 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3250-60 can also be used in the other direction and will be N type female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss test SMA right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female low loss test cable 60 inch length using PE-P300LL coax.

1 : $765.99
25 : $727.69
50 : $689.39

PE3C4880-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 60 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 60 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 60 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4880-60, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4880-60 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4880-60 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 60 inch length using RG405 coax.

1 : $222.99
25 : $211.84
50 : $200.69

PE3MSA00602-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: PLUG, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. LSZH TRB Threaded Plug with Blunt Cut for TWCH-78-2, 24" Twinax Cable., Radio frequency assembly LSZH TRB threaded plug with blunt cut for TWCH-78-2, 24" twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LSZH TRB threaded plug with blunt cut for TWCH-78-2, 24" twinax cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MSA00602-24 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MSA00602-24 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00602-24 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LSZH TRB threaded plug with blunt cut for TWCH-78-2, 24" twinax cable.

1 : $440.99
25 : $418.94
50 : $396.89
100 : $379.25

TE Connectivity

CRGP0603F1K5

TE Connectivity

CRGP 0603 1K5 1% Resistance Value: 1.5K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0603 Surface Mount Resistor | 1.5K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP0603F1K5 | Internal Number: 2-2176326-7 | TE Connectivity
RoHS : Compliant

10,000 : $0.05
5,000 : $0.05
2,500 : $0.05
1,000 : $0.05
500 : $0.05
250 : $0.05
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.06

80,319

206060-1

TE Connectivity

CPC PLUG ASSEMBLY SIZE 11-4 Number of Positions: 4 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: No Circular Power Connector | 4 Housing 600 VDC Wire-to-Wire | Part Number: 206060-1 | Internal Number: 206060-1 | Alias Number: 810739-000 | TE Connectivity
RoHS : Compliant

50 : $11.17
25 : $11.83
10 : $12.49
1 : $13.15

16,919

CPF0603B1K8E

TE Connectivity

CPF 0603 1K8 0.1% 25PPM 5K RL Resistance Value: 1.8K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 1.8K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0603B1K8E | Internal Number: 8-1614881-8 | TE Connectivity
RoHS : Compliant

2,500 : $0.24
1,000 : $0.24
500 : $0.25
250 : $0.26
100 : $0.26
50 : $0.27
25 : $0.27
10 : $0.28
1 : $0.29

10,501

CPF0603B20RE

TE Connectivity

CPF 0603 20R 0.1% 25PPM 5K RL Resistance Value: 20 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 20 Ω Thin Film Precision Resistor .1 % | Part Number: CPF0603B20RE | Internal Number: 4-1614881-3 | TE Connectivity
RoHS : Compliant

2,500 : $0.24
1,000 : $0.24
500 : $0.25
250 : $0.26
100 : $0.26
50 : $0.27
25 : $0.27
10 : $0.28
1 : $0.29

8,759

CRGCQ0603J3M3

TE Connectivity

CRGCQ 0603 3M3 5% Resistance Value: 3.3M Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 5 % Package Size Code: 0603 Surface Mount Resistor | 3.3M Ω Thick Film General Purpose Resistor 5 % | Part Number: CRGCQ0603J3M3 | Internal Number: 4-2176340-0 | TE Connectivity
RoHS : Compliant

10,000 : $0.01
5,000 : $0.01
2,500 : $0.01
1,000 : $0.01
500 : $0.01
250 : $0.01
100 : $0.01
50 : $0.01
25 : $0.01
10 : $0.01
1 : $0.01

6,186

CPF0603F31K6C1

TE Connectivity

CPF 0603 31K6 1% 50PPM 1K RL Resistance Value: 31.6K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: 1 % Package Size Code: 0603 Surface Mount Resistor | 31.6K Ω Thin Film Precision Resistor 1 % | Part Number: CPF0603F31K6C1 | Internal Number: 1879338-8 | TE Connectivity
RoHS : Compliant

500 : $0.05
250 : $0.05
100 : $0.05
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.06

4,622

CRGP0603F33K

TE Connectivity

CRGP 0603 33K 1% Resistance Value: 33K Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 0603 Surface Mount Resistor | 33K Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP0603F33K | Internal Number: 4-2176326-3 | TE Connectivity
RoHS : Compliant

10,000 : $0.05
5,000 : $0.05
2,500 : $0.05
1,000 : $0.05
500 : $0.05
250 : $0.05
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.06

2,977

L000606-05

TE Connectivity

LPWA FPC ANT HDP MHF4L 100mm 450-467 MHz Antenna Type: Flexible PCB (FPC) Mounting Location: Internal/Embedded Mounting Method: Adhesive Mount Antenna Termination: MHF4 Directionality: Omnidirectional Flexible PCB (FPC) Internal/Embedded Adhesive Mount MHF4 | Antenna | Part Number: L000606-05 | Internal Number: L000606-05 | TE Connectivity
RoHS : Compliant

1 : $3.11

1,998

CONREVSMA006.062-G

TE Connectivity

RP-SMA Jack 50 Ohm .062 PCB Edge Mount RF Interface: RP-SMA RF Connector Style: Jack Impedance: 50 Ω RF Connector Coupling Mechanism: Threaded Operating Frequency Range: 18 GHz RP-SMA Jack 50 Ω Threaded | Coax Connector | Part Number: CONREVSMA006.062-G | Internal Number: L9000256-01 | TE Connectivity
RoHS : Compliant

1,000 : $6.24
500 : $6.41
250 : $6.61
100 : $6.83
50 : $7.03
1 : $7.72

1,148

CPF0603B180KE1

TE Connectivity

CPF 0603 180K 0.1% 25PPM 1K RL Resistance Value: 180K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 180K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0603B180KE1 | Internal Number: 1879217-4 | TE Connectivity
RoHS : Compliant

500 : $0.31
250 : $0.32
100 : $0.33
50 : $0.34
25 : $0.36
10 : $0.37
1 : $0.38

1,137

CPF0603B130KE1

TE Connectivity

CPF 0603 130K 0.1% 25PPM 1K RL Resistance Value: 130K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0603 Surface Mount Resistor | 130K Ω Thin Film Precision Resistor .1 % | Part Number: CPF0603B130KE1 | Internal Number: 1879217-1 | TE Connectivity
RoHS : Compliant

500 : $0.31
250 : $0.32
100 : $0.33
50 : $0.34
25 : $0.36
10 : $0.37
1 : $0.38

1,091

CPF0603F118KC1

TE Connectivity

CPF 0603 118K 1% 50PPM 1K RL Resistance Value: 118K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: 1 % Package Size Code: 0603 Surface Mount Resistor | 118K Ω Thin Film Precision Resistor 1 % | Part Number: CPF0603F118KC1 | Internal Number: 6-1879338-3 | TE Connectivity
RoHS : Compliant

500 : $0.05
250 : $0.05
100 : $0.05
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.06

989

1-794106-0

TE Connectivity

20P MINI UMNL R/A HDR ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 20 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 20 | PCB Header & Receptacle | Part Number: 1-794106-0 | Internal Number: 1-794106-0 | TE Connectivity
RoHS : Compliant

1,000 : $4.72
100 : $5.86
25 : $6.18
10 : $7.16
1 : $7.97

213

206060-2

TE Connectivity

CPC PLUG,SZ 11-4,SMALL PACK Number of Positions: 4 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: No Circular Power Connector | 4 Housing 600 VDC Wire-to-Wire | Part Number: 206060-2 | Internal Number: 206060-2 | TE Connectivity
RoHS : Compliant

50 : $16.15
25 : $17.1
10 : $18.05
1 : $19.0

DTM06-08SB-E007

TE Connectivity

PLG, 8P, BLK, N, XCAP, B Nominal Voltage Architecture: 48 V 24 V 12 V Number of Positions: 8 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Dtm Housing | 48 V | Part Number: DTM06-08SB-E007 | Internal Number: DTM06-08SB-E007 | Alias Number: ZPF000000000130403 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $4.13

Teledyne HiRel

M38510/20602BUA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 4, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9230601MYA

Teledyne HiRel

COUNTERHIFT REGISTER, 4-STAGE
RoHS : Not Compliant

M38510/06006BEA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT
RoHS : Not Compliant

5962-88706012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8950601KA

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

M38510/06006B2C

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

M38510/30605BAA

Teledyne HiRel

SHIFT REGISTER, 8-BIT PARALLEL-OUT
RoHS : Not Compliant

5962-8870601SA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8870601RA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/30605BBA

Teledyne HiRel

SHIFT REGISTER, 8-BIT PARALLEL-OUT
RoHS : Not Compliant

M38510/30605B2A

Teledyne HiRel

SHIFT REGISTER, 8-BIT PARALLEL-OUT
RoHS : Not Compliant

M38510/20602BYA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 4, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/06006BFA

Teledyne HiRel

OR/NOR GATE, DUAL 4-5 INPUT

5962-8950602KA

Teledyne HiRel

BUS DRIVER, 10-BIT, NONINVERTING
RoHS : Not Compliant

5962-9160601MKA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

CSMF0603-VH-R060DT

VENKEL LTD

Current Sense Metal Foil CR;0603;1/2W;�75PPM;60mR;�0.5%
RoHS : Compliant

15,000

HPTF0603-QP-8060FT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;806R;�1%
RoHS : Compliant

PWCR0603-QK-8060DT

VENKEL LTD

Pulse Withstanding CR;0603;1/10W;�100PPM;806R;�0.5%
RoHS : Compliant

TFCR0603-10W-K-1060CT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;106R;�0.25%
RoHS : Compliant

TFCR0603-10W-K-8060FT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;806R;�1%
RoHS : Compliant

TFCR0603-16W-C-7060CT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;706R;�0.25%
RoHS : Compliant

TFCR0603-16W-C-7060FT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;706R;�1%
RoHS : Compliant

TFCR0603-16W-E-8060CT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;806R;�0.25%
RoHS : Compliant

HPTF0603-QN-8060CT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;806R;�0.25%
RoHS : Compliant

HPTF0603-SC-8060DT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;806R;�0.5%
RoHS : Compliant

UPTF0603-16W-E-1060AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;106R;�0.05%
RoHS : Compliant

UPTF0603-16W-N-8060CT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;806R;�0.25%
RoHS : Compliant

UPTF0603-16W-N-8060DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;806R;�0.5%
RoHS : Compliant

UPTF0603-16W-P-7060UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;706R;�0.01%
RoHS : Compliant

HPTF0603-SE-8060FT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;806R;�1%
RoHS : Compliant

Win Source Electronics

RC0603FR-075K6L

YAGEO Corporation

RES SMD 5.6K OHM 1% 1/10W 0603
RoHS : Compliant

93,750 : $0.0032
71,430 : $0.0035
55,560 : $0.0036
39,475 : $0.0038
25,645 : $0.0039
10,640 : $0.0047

990,000

RC0603FR-0722K1L

YAGEO Corporation

RES SMD 22.1K OHM 1% 1/10W 0603
RoHS : Compliant

115,385 : $0.0026
86,210 : $0.0029
66,670 : $0.003
48,390 : $0.0031
31,250 : $0.0032
12,825 : $0.0039

155,000

HCPL-0600-500E/HCPL0600R2

Avago Technologies

845 : $0.3552
680 : $0.3696
525 : $0.384
365 : $0.4129
235 : $0.4274
110 : $0.4562

136,950

HCPL-0601-060E

Broadcom Limited

OPTOISO 3.75KV OPN COLLECTOR 8SO
RoHS : Compliant

815 : $0.37
650 : $0.385
500 : $0.4
350 : $0.4301
225 : $0.4452
110 : $0.4752

34,030

206060-1

TE Connectivity

AMP Circular Connectors for Commercial Signal and Power Applications | CONN PLUG HSG FMALE 4POS INLINE
RoHS : Compliant

160 : $1.8831
120 : $2.1004
93 : $2.1728
67 : $2.2452
44 : $2.3176
18 : $2.8246

24,394

503480-0600

Molex

0.50mm (.020") Pitch Easy-On BackFlip FPC Connector, 1.00mm (.039") Height, Right Angle, SMT, Dual Contact
RoHS : Compliant

465 : $0.65
345 : $0.725
270 : $0.75
195 : $0.775
125 : $0.8
55 : $0.975

22,260

FS1406-0600-AS

TDK Corporation

DC DC CONVERTER 0.6V
RoHS : Compliant

44 : $6.894
33 : $7.6894
26 : $7.9546
19 : $8.2197
12 : $8.4849
5 : $10.341

17,100

NCP1060BD060R2G

onsemi

IC OFFLINE SW MULT TOP 10SOIC
RoHS : Compliant

230 : $1.3046
185 : $1.3576
142 : $1.4107
99 : $1.5167
64 : $1.5697
30 : $1.6758

15,000

QSH-060-01-F-D-A-K-TR

Samtec Inc

Board to Board & Mezzanine Connectors 0.50 mm Q Strip High-Speed Ground Plane Socket Strip
RoHS : Compliant

44 : $6.9122
33 : $7.7097
26 : $7.9756
19 : $8.2414
12 : $8.5073
5 : $10.3683

15,000

HCPL-060L-060E

Broadcom Limited

OPTOISO 3.75KV OPN COLLECTOR 8SO / High Speed LVTTL Compatible 3.3 Volt Optocouplers
RoHS : Compliant

79 : $4.2706
64 : $4.4442
49 : $4.6178
34 : $4.965
22 : $5.1386
11 : $5.4858

14,370

NCP1060AD060R2G

onsemi

IC OFFLINE SW MULT TOP 10SOIC
RoHS : Compliant

265 : $1.1389
200 : $1.2703
155 : $1.3141
115 : $1.3579
75 : $1.4017
30 : $1.7083

12,000

VS-30BQ060-M3/9AT

Vishay Huntington

DIODE SCHOTTKY 3.0A SMC

2,030 : $0.148
1,625 : $0.154
1,250 : $0.16
875 : $0.1721
565 : $0.1781
265 : $0.1901

11,429

NCP10672BD060R2G

onsemi

IC OFFLINE SWITCH MULT TOP 8SOIC / Converter Offline Buck, Buck-Boost, Flyback Topology 60kHz 8-SOIC
RoHS : Compliant

350 : $0.8667
260 : $0.9667
200 : $1.0
150 : $1.0334
95 : $1.0667
40 : $1.3001

5,000

C3D06060A

Cree, Inc.

DIODE SCHOTTKY 600V 6A TO220-2 / Rectifier Diode Schottky SiC 600V 19A Automotive 2-Pin(2+Tab) TO-220

240 : $1.2506
180 : $1.3949
140 : $1.443
105 : $1.4911
65 : $1.5392
30 : $1.8759

4,750

CSD06060A

Wolfspeed

DIODE SCHOTTKY 600V 10A TO220-2
RoHS : Compliant

310 : $1.0866
235 : $1.212
180 : $1.2538
130 : $1.2956
85 : $1.3374
35 : $1.6299

1,000

Wuhan P&S

TNPW0603100KBEEA

Vishay Intertechnologies

Film chip resistance 100 k �� 0.1% 0.1W
RoHS : Compliant

1 : $0.99
100 : $0.33
500 : $0.31
1,000 : $0.3

360,000

CRCW060315R0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

100,000

CRCW060322K0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

70,000

CRCW060330K0FKEA

Vishay Intertechnologies

Chip Resistors��30 k�� 1% 0.1W
RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

55,000

CRCW06031K10FKEA

Vishay Intertechnologies

RoHS : Compliant

1 : $0.07
100 : $0.03
500 : $0.02
1,000 : $0.02

50,000

MCT06030C4702FP500

Vishay Intertechnologies

Precision Thin Film Chip Resistors
RoHS : Compliant

1 : $0.1
100 : $0.04
500 : $0.04
1,000 : $0.03

45,000

CRCW0603180KFKEAHP

Vishay Intertechnologies

CRCW0603-HP 100 180K 1% ET1 E3
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

45,000

MCT06030C4709FP500

Vishay Intertechnologies

Precision Thin Film Chip Resistors
RoHS : Compliant

1 : $0.13
100 : $0.05
500 : $0.04
1,000 : $0.04

45,000

TNPW06032K70BEEA

Vishay Intertechnologies

Chip resistance, 2.7 k �� 0.1% 0.1W
RoHS : Compliant

1 : $0.99
100 : $0.33
500 : $0.31
1,000 : $0.3

35,000

MCT06030C3001FP500

Vishay Intertechnologies

Precision Thin Film Chip Resistors��3 kOhms ��1% 0.1W
RoHS : Compliant

1 : $0.1
100 : $0.04
500 : $0.04
1,000 : $0.03

35,000

MCT06030C3320FP500

Vishay Intertechnologies

Precision Thin Film Chip Resistors
RoHS : Compliant

1 : $0.02
100 : $0.01
500 : $0.01
1,000 : $0.01

20,000

NTCS0603E3472HHT

Vishay Intertechnologies

SMD 0603, Glass Protected NTC Thermistors 4.7k
RoHS : Compliant

1 : $1.08
100 : $0.36
500 : $0.34
1,000 : $0.33

8,000

CRCW060310R0FKEAHP

Vishay Intertechnologies

Pulse Proof, High Power Thick Film Chip Resistors
RoHS : Compliant

1 : $0.16
100 : $0.06
500 : $0.05
1,000 : $0.05

5,000

MUR3060WTG

onsemi

SWITCHMODE Power Rectifiers
RoHS : Compliant

1 : $5.34
100 : $3.41
500 : $2.81
1,000 : $2.59

3,510

MBRB2060CT-M3/I

Vishay Intertechnologies

Dual Common Cathode Schottky Rectifier,20A,60V

1 : $2.93
100 : $0.98
500 : $0.91
1,000 : $0.88

800

0603C-R11K 销售商

链接网址