08480800ACNDMNFZCWC Price, 销售商, Stock

Operational Amplifier 55V RailtoRail Input and Output 12 MHz Quad Operational Amplifier 55V RailtoRail Input and Output 12 MHz QuadONSSPCAPLFRS (Alt: NCS20084DTBR2G)
RoHS : Compliant

TBD62084APG(Z,HZW)

Toshiba America Electronic Components

DMOS Transistor Array 8 Output 500 mA50V Out 40 to 85C PDIP18 (Alt: TBD62084APG(Z,HZW))
RoHS : Compliant

CYUSB3084FCAXIXQMA1

Infineon Technologies AG

USB Interface EZUSB 512KB Flash 1024KB SRAM USB Peripheral Controller USB 32 Gen 1 162 V (Alt: SP005957784)
RoHS : Compliant

BOXNUC7I3BNHXF 960847

Intel Corporation

SBC x8664 Intel Core i37100U Dual Core 64Mbit SPI Flash (Alt: 960847)
RoHS : Compliant

ECCO

JMIL.40849-A

Fujikura America Inc

100

M24308/4-2F

ITT Interconnect Solutions

RoHS : Not Compliant

1 : $42.97

M24308/4-4Z

ITT Interconnect Solutions

RoHS : Not Compliant

1 : $61.1

M24308/4-5Z

ITT Interconnect Solutions

RoHS : Not Compliant

1 : $75.46

M24308/4-4F

ITT Interconnect Solutions

RoHS : Not Compliant

1 : $56.46

FDH Electronics

M24308/4-11P

Amphenol Positronic

Connector

1 : $17.582
5 : $16.39
10 : $14.652
25 : $14.433
50 : $14.433
100 : $14.221
250 : $13.814
500 : $13.431
1,000 : $13.247
2,500 : $13.247
10,000 : $13.247

2408404-102

SENIOR AEROSPACE SSP

Miscellaneous

1 : $15,972.5
5 : $15,972.5
10 : $13,593.617
25 : $10,304.839
50 : $10,304.839
100 : $9,535.821
250 : $9,259.42
500 : $9,259.42
1,000 : $9,259.42
2,500 : $9,259.42
10,000 : $9,259.42

M24308/4-9F

TE Connectivity

Connector
RoHS : Not Compliant

770-027S1108-4

Glenair Inc

Connector

1 : $198.964
5 : $185.475
10 : $165.803
25 : $163.328
50 : $163.328
100 : $160.926
250 : $156.329
500 : $151.986
1,000 : $149.904
2,500 : $149.904
10,000 : $149.904

M85049/144S22Z08-4

Amphenol PCD

Backshells & Ac

M85049/144S24N08-4

Amphenol PCD

Backshells & Ac

M85049/144-24W08-4

Amphenol PCD

Backshells & Ac

JG-08420

Honeywell Sensing and Control

Switches

1 : $55.556
5 : $55.556
10 : $48.077
25 : $40.984
50 : $40.984
100 : $39.683
250 : $38.462
500 : $37.313
1,000 : $36.232
2,500 : $35.714
10,000 : $35.714

M85049/144-32W08-4

Amphenol PCD

Backshells & Ac

M85049/144-48N08-4

Amphenol PCD

Backshells & Ac

M8805/98-084

Honeywell Sensing and Control

Switches

M85049/144-20W08-4

Amphenol PCD

Backshells & Ac

M85049/144-36Z08-4

Amphenol PCD

Backshells & Ac

M85049/144S28W08-4

Amphenol PCD

Backshells & Ac

1108-4-B7-W8

HellermannTyton

Harness Mgmt

Maritex

TL084CDT

STMicroelectronics

Special Purpose Amplifiers; TL084CDT; STMICROELECTRONICS; 14; SOIC; 18 V; 4
RoHS : Compliant

5,000 : $0.112
2,500 : $0.119
100 : $0.139
30 : $0.152
10 : $0.204
1 : $0.271

81,796

TL084IDT

STMicroelectronics

Special Purpose Amplifiers; TL084IDT; STMICROELECTRONICS; 14; SOIC; 18 V; 4
RoHS : Compliant

1,000 : $0.122
500 : $0.133
150 : $0.152
50 : $0.176
5 : $0.22
1 : $0.688

17,909

RCML08474JT LEAD FREE 5%, T/B 4X470K

Fenghua (HK) Electronics Ltd

Chip array SMD; RAC4x470k; 1/16W; 5%; 4x0603; 1206

5,000 : $0.006
2,500 : $0.008
500 : $0.009
1 : $0.01

6,100

RCML08471JT LEAD FREE 5%, T/B 4X470R

Fenghua (HK) Electronics Ltd

Chip array SMD; RAC4x470R; 1/16W; 5%; 4x0603; 1206

5,000 : $0.004
2,500 : $0.005
500 : $0.006
1 : $0.007

3,046

RCML08473JT LEAD FREE 5%, T/B 4X 47K

Fenghua (HK) Electronics Ltd

Chip array SMD; RAC4x47k; 1/16W; 5%; 4x0603; 1206

5,000 : $0.005
2,500 : $0.008
500 : $0.009
1 : $0.01

1,236

RNP18-PK0608-470K

RDA Microelectronics

Inductor: wire; THT; 47uH; Imax: 830 mA; 230mOhm; 10%;

1,000 : $0.069
500 : $0.081
100 : $0.092
10 : $0.104
1 : $0.116

1,000

RNP18-PK0608-471K

RDA Microelectronics

Inductor: wire; THT; 470uH; 500mA; 1.94Ohm; 10%; 7.5x9.5mm

1,000 : $0.069
500 : $0.081
100 : $0.092
10 : $0.104
1 : $0.116

1,000

RNP18-PK0608-472K

RDA Microelectronics

Inductor: wire; THT; 4.7mH; Ipracy: 160mA; 19.41Ohm; 10%; 7.5x9.5mm

1,000 : $0.079
500 : $0.092
100 : $0.105
10 : $0.118
1 : $0.132

1,000

RNP18-PK0608-4R7K

RDA Microelectronics

Inductor: wire; THT; 4.7uH; Ipracy: 5A; 22.94mOhm; 20%; 7.5x9.5mm

1,000 : $0.069
500 : $0.081
100 : $0.092
10 : $0.104
1 : $0.116

1,000

TL084ACDR

Texas Instruments

Operational Amplifiers; TL084ACDR; TEXAS INSTRUMENTS; 6 mV; 14; 18 V; 4
RoHS : Compliant

1,000 : $0.373
500 : $0.403
100 : $0.486
30 : $0.588
10 : $0.693
1 : $0.921

859

TL084CDR

Texas Instruments

Operational Amplifiers; TL084CDR; TEXAS INSTRUMENTS; 15 mV; 14; 18 V; 4
RoHS : Compliant

5,000 : $0.128
2,500 : $0.139
500 : $0.173
150 : $0.211
50 : $0.246
5 : $0.33
1 : $1.037

668

TLV62084DSGR

Texas Instruments

DC DC Converters; TLV62084DSGR; TEXAS INSTRUMENTS; 8; Buck; 1; 2 mm
RoHS : Compliant

6,000 : $0.079
3,000 : $0.084
100 : $0.098
30 : $0.108
10 : $0.145
1 : $0.192

500

TL084CN

Texas Instruments

Special Purpose Amplifiers; TL084CN; TEXAS INSTRUMENTS; 14; PDIP; 18 V; 4
RoHS : Compliant

1,000 : $0.454
500 : $0.486
100 : $0.556
10 : $0.688
1 : $0.857

127

SS0840WS_R1_00001

PanJit Semiconductor

Rectifier Diodes & Bridges; SS0840WS_R1_00001; PANJIT
RoHS : Compliant

3,000 : $0.029
300 : $0.041
100 : $0.049
10 : $0.074
1 : $0.23

TL084G-S14-R

Unisonic Technologies Co Ltd

Operational Amplifiers; TL084G-S14-R; UTC
RoHS : Compliant

5,000 : $0.121
300 : $0.141
100 : $0.159
30 : $0.183
10 : $0.229
1 : $0.295

Pasternack Enterprises US

PE3C0848/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male low loss cable 60 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 60 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C0848/HS-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0848/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0848/HS-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

849

PE3W08428LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB Positive Snap, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: SMB Positive Snap, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm SMB Positive Snap Plug to 75 Ohm SMB Positive Snap Plug Cable 12 Inch Length Using 75 Ohm RG187 Coax, LF Solder., Radio frequency assembly 75 Ohm SMB positive snap plug to 75 Ohm SMB positive snap plug cable 12 inch length using 75 Ohm RG187 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB positive snap plug to 75 Ohm SMB positive snap plug cable 12 inch length using 75 Ohm RG187 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB positive snap to SMB positive snap cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB positive snap cable connection on one end and a SMB positive snap cable connection on the other. Our SMB positive snap to SMB positive snap cable assembly has a plug gender on end 1 and a plug on end 2. PE3W08428LF-12 can also be known as a SMB positive snap male to SMB positive snap male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W08428LF-12 RF cable has a PTFE jacket of 0.102-inch diameter. The flexible RF cable has an in-series connection. SMB positive snap male to SMB positive snap male cable assembly PE3W08428LF-12 is built with RG187 which is a flexible coax type. The Pasternack flexible SMB Positive Snap cable assembly is manufactured with SMB positive snap to SMB positive snap cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMB positive snap male to SMB positive snap male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB positive snap to SMB positive snap cable assembly for quick shipment worldwide. Variations of SMB positive snap cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB Positive Snap to SMB Positive Snap RF cable assembly as per your requirements.

1 : $71.99
10 : $70.55
25 : $69.11
100 : $67.67

384

PE3W04508-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400-DB Coax., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using LMR-400-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using LMR-400-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W04508-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W04508-48 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04508-48 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 48 inch length using LMR-400-DB coax.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

324

PE3W08402-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male to SSMC Plug Right Angle Cable 50 cm Using RG188-DS Coax., Radio frequency assembly SMA male to SSMC plug right angle cable 50 cm using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug right angle cable 50 cm using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3W08402-50CM, can also be known as a SMA plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3W08402-50CM is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency SMA male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08402-50CM can also be used in the other direction and will be right angle SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug right angle cable 50 cm using RG188-DS coax.

1 : $74.99
25 : $71.24
50 : $67.49
100 : $64.49

150

PE3M0084-48

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. MIL-DTL-17 TNC Male to TNC Male Cable 48 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 TNC male to TNC male cable 48 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 TNC male to TNC male cable 48 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/26-0011 TNC to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/26-0011 TNC cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/26-0011 TNC to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/26-0011 TNC to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0084-48, can also be known as a MIL-DTL-17/MIL-C-17 M39012/26-0011 TNC plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/26-0011 TNC plug to M39012/26-0011 TNC plug cable assembly PE3M0084-48 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/26-0011 TNC cable assembly is manufactured with M39012/26-0011 TNC to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/26-0011 TNC male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/26-0011 TNC plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/26-0011 TNC to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/26-0011 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 TNC male to TNC male cable 48 inch length using M17/128-RG400 coax.

1 : $211.99
25 : $201.39
50 : $190.79

PE3M0408-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 16 Contact Socket to MIL Size 16 Contact Socket Cable, D38999 Series II, 48 Inch Length Using M17/113-RG316 Coax. The PE3M0408-48 from Pasternack is a D38999 contact cable assembly that is built with a size 16 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0408-48 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0408-48 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0408-48 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $173.99
10 : $167.03
25 : $160.07
100 : $153.11

PE3C10848-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to 2.92mm Male Non-Magnetic Cable 18 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10848-18 non-magnetic 2.92mm male to 2.92mm male RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10848-18 can also be known as a non-magnetic 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C10848-18 2.92mm plug to 2.92mm plug cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm non-magnetic RF cable assembly as per your requirements.

1 : $202.71
25 : $192.57
50 : $182.44
100 : $174.33

PE33084-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 60 Inch Length Using RG178 Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 60 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 60 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33084-60, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33084-60 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 60 inch length using RG178 coax.

1 : $85.99
25 : $81.69
50 : $77.39
100 : $73.95

PE3W08494-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: LC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG218/U, RF Cable Type: RG218, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. LC Female to N Female Cable 48 Inch Length Using RG218 Coax., Radio frequency assembly LC female to N female cable 48 inch length using RG218 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The LC female to N female cable 48 inch length using RG218 coax, LC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom LC to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with LC cable connection on one end and type N cable connection on the other. Our LC to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W08494-48 can also be known as a LC jack to type N jack cable assembly and will be shipped same-day as it is purchased. LC jack to N type jack cable assembly PE3W08494-48 is built with RG218 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this LC female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08494-48 can also be used in the other direction and will be N type female to LC female cable assembly if the opposite connectivity is required. LC jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality LC to type N cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LC female to N female cable 48 inch length using RG218 coax.

1 : $740.0
25 : $703.0
50 : $666.0
100 : $636.4

PE3CA1084

Pasternack Enterprises

PE3W04084LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Cable Using PE-P195 Coax, LF Solder. PE3W04084LF is a SMA female to SMA male cable using PE-P195 coax. This Pasternack SMA female to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04084LF SMA female to SMA male cable assembly is constructed with PE-P195 coax.

PE3W08084

Pasternack Enterprises

PE3W08453

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to MMCX Jack Cable Using PE-SR047FL Coax. PE3W08453 is a Mini SMP female right angle to MMCX jack cable using PE-SR047FL coax. This Pasternack Mini SMP female right angle to MMCX jack cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm MMCX for connector 2. Mini SMP right angle to MMCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to jack MMCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W08453 Mini SMP female right angle to MMCX jack cable assembly is constructed with PE-SR047FL coax.

PE3C10846-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10846-9 non-magnetic SMA male to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10846-9 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10846-9 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10846-9 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.

1 : $198.17
25 : $188.26
50 : $178.35
100 : $170.43

PE3W05084LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to SMA Male Cable Using LMR-100-FR Coax with HeatShrink., Pasternack’s PE3W05084LF/BK/HS right angle SMA male to SMA male RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity SMA cable connection on one end and an SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W05084LF/BK/HS can also be known as a right angle reverse polarity SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05084LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05084LF/BK/HS reverse polarity SMA plug to SMA plug cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05084LF/BK/HS can also be used in the other direction and will be an SMA male to right angle reverse polarity SMA male cable assembly if the opposite connectivity is required. This SMA reverse polarity right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.