 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
1183AL-30-AF5-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
 ComSIT USA | ERJ1GNF1183C | Panasonic Electronic Components | AVAILABLE EU RoHS : Compliant | 363 | ||
| TPL1183525262J261 | TDK Corporation | AVAILABLE EU | 15,000 | |||
| CR040216W1183F | VENKEL LTD | AVAILABLE EU | 6,878 | |||
ComSIT USA | MCR01MZPF1183 | ROHM Semiconductor | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.063W, 118000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 30,000 | ||
| RF1183000 | Littelfuse Inc | POLYSWITCH RESETTABLE DEVICE PTC Resettable Fuse RoHS : Compliant | 9,000 | |||
| B82422A1183J100V3 | TDK Electronics | SMT INDUCTOR General Purpose Inductor, 18uH, 5%, 1 Element, Ferrite-Core, SMD, 1210 RoHS : Compliant | 6,000 | |||
| SMM02040C1183FB300 | Vishay Intertechnologies | THIN FILM MINI MELF RESISTOR Fixed Resistor, Thin Film, 0.25W, 118000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1406 RoHS : Compliant | 1,771 | |||
TLV7111833DDSET | Texas Instruments | LOW-IQ LOW-DROPOUT REGULATOR FOR PORTABLE DEVICE Fixed Positive LDO Regulator, 2 Output, 1.8V1, 3.3V2, CMOS, PDSO6 RoHS : Compliant | 500 | |||
| IRS211834PBF | International Rectifier | Electronic Component RoHS : Compliant | 75 | |||
| ISP1183BS | Philips E C G Inc | Bus Controller, PQCC32 RoHS : Not Compliant | 40 | |||
 NexGen Digital | ERJ-2RKF1183 | Panasonic Electronic Components | 10,000 | |||
| ERJ-3EKF1183V | Panasonic Electronic Components | 200 | ||||
| PVA1183C-LF | Z-Communications Inc | 49 | ||||
| SFS1183C-LF | Z-Communications Inc | 16 | ||||
 Rutronik | CR10-1183-FN | ASJ Holdings Limited | RC0402 118K 1% 0,063W TK100 RoHS : Compliant |
| 250,000 | |
| CR21-183-JL | ASJ Holdings Limited | RC0805 18K 5% 0,125W TK100 RoHS : Compliant |
| 150,000 | ||
| PH1-02-VM-.118/.335-L-HT | Adam Technologies Inc | 02P Pin Header 1R 2.54mm HighTemp GOLD RoHS : Compliant |
| 14,000 | ||
 Avnet Asia | 2118310-2 | TE Connectivity | (Alt: 2118310-2) RoHS : Compliant |
| 600 | |
| 2118308-8 | TE Connectivity | (Alt: 2118308-8) RoHS : Compliant | 0 | |||
| 77311-838-02LF | Amphenol Corporation | BASICS,BERGSTIK HDR V/T 2P (Alt: 77311-838-02LF) RoHS : Compliant | 0 | |||
| ERJ1GNF1183C | Panasonic Electronic Components | SMD Chip Resistor, 118 kohm, ? 1%, 50 mW, 0201 [0603 Metric], Thick Film (Alt: ERJ1GNF1183C) RoHS : Compliant | 0 | |||
| ERJ2RKF1183X | Panasonic Electronic Components | SMD Chip Resistor, 118 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film (Alt: ERJ2RKF1183X) RoHS : Compliant | 0 | |||
| 1-2118309-2 | TE Connectivity | (Alt: 1-2118309-2) RoHS : Compliant | 0 | |||
| MAL211838109E3 | Vishay Intertechnologies | Electrolytic Capacitor, 10 uF, 63 V, ? 20%, Axial Leaded, 4000 hours @ 125?C, Polar, Axial Leaded (Alt: MAL211838109E3) RoHS : Compliant |
| 0 | ||
| 2118309-1 | TE Connectivity | PCB Antenna, Dual Band, Linear, 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.875 GHz, Adhesive Mount (Alt: 2118309-1) RoHS : Compliant | 0 | |||
| 77311-118-36LF | Amphenol Corporation | Conn Unshrouded Header HDR 36 POS 2.54mm Solder ST Thru-Hole Bag (Alt: 77311-118-36LF) RoHS : Compliant | 0 | |||
| 0039281183 | Molex | Pin Header, 18 Contacts, 2 Rows, 4.2mm, Tin, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0039281183) RoHS : Compliant | 0 | |||
| 77311-838-06LF | Amphenol Corporation | (Alt: 77311-838-06LF) RoHS : Compliant | 0 | |||
| 1-2118309-1 | TE Connectivity | (Alt: 1-2118309-1) RoHS : Compliant | 0 | |||
| RK73H1JTTD1183F | KOA Speer Electronics Inc | SMD RES 0603 118K-OHM +-1% (Alt: RK73H1JTTD1183F) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISR-01-183J | Abracon Corporation | RoHS : Compliant |
| 0 | |
 EBV Elektronik | 1N1183A | Microchip Technology Inc | Std Rectifier DO5 (Alt: 1N1183A) RoHS : Not Compliant | 0 | ||
| CA11183_BROOKE-W | LEDIL | Brooke Reflectors For Bridgelux BXRA CNW 080012002000 Series Of LEDs (Alt: CA11183_BROOKE-W) RoHS : Compliant | 0 | |||
| CA11837_LAURA-M-PIN | LEDIL | Square Lens Assembly For LUXEON H502 Oslon Square PC NF2x757D Oslon SSL 150 XPEHEW XPE2 LED (Alt: CA11837_LAURA-M-PIN) RoHS : Compliant | 0 | |||
| CA11837_LAURA-M-PIN-WHT | LEDIL | Accessories for LEDs Lens Cooling (Alt: CA11837_LAURA-M-PIN-WHT) RoHS : Compliant | 0 | |||
 Maritex | AX93221-18-36 | Axiomtek Co Ltd | Converter 18/36bit LVDS to DVI-D |
| 1 | |
 Pasternack Enterprises US | PE3C1183LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 7/16 DIN Male Right Angle to N Male Cable 36 Inch Length Using RG213 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male right angle to N male cable 36 inch length using RG213 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male cable 36 inch length using RG213 coax with heatshrink, LF solder, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1183LF/HS-36 can also be known as a right angle 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C1183LF/HS-36 is built with RG213 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1183LF/HS-36 can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male cable 36 inch length using RG213 coax with heatshrink, LF solder. |
| 0 | |
| PE3W11835-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 1.0/2.3 Plug to N Male Right Angle Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to N male right angle cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to N male right angle cable 48 inch length using RG316 coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and right angle type N cable connection on the other. Our 1.0/2.3 to right angle N type cable assemblies have a plug gender on end 1 and male on end 2. PE3W11835-48 can also be known as a 1.0/2.3 male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to type N plug cable assembly PE3W11835-48 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 plug to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11835-48 can also be used in the other direction and will be right angle type N male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to type N cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug to N male right angle cable 48 inch length using RG316 coax. |
| 0 | ||
| PE3C1183LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male Right Angle to N Male Cable 48 Inch Length Using RG213 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male right angle to N male cable 48 inch length using RG213 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male cable 48 inch length using RG213 coax with heatshrink, LF solder, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and N type cable connection on the other. Our right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1183LF/HS-48 can also be known as a right angle 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C1183LF/HS-48 is built with RG213 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1183LF/HS-48 can also be used in the other direction and will be N type male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male cable 48 inch length using RG213 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W11833 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. 4.3-10 Female 4 Hole Flange to 4.3-10 Female 4 Hole Flange Cable Using SPF-250 Coax. PE3W11833 is a 4.3-10 female 4 hole flange to 4.3-10 female 4 hole flange cable using SPF-250 coax. This Pasternack 4.3-10 female 4 hole flange to 4.3-10 female 4 hole flange cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female 4.3-10 4 hole flange to female 4.3-10 4 hole flange cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W11833 4.3-10 female 4 hole flange to 4.3-10 female 4 hole flange cable assembly is constructed with SPF-250 coax. | 0 | |||
| PE3W11839 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female to BNC Male Cable Using RG223 Coax. PE3W11839 is a N female to BNC male cable using RG223 coax. This Pasternack N female to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11839 N female to BNC male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W11831 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity MCX Jack Bulkhead to SMA Male Right Angle Cable Using RG178 Coax. PE3W11831 is a reverse polarity MCX jack bulkhead to SMA male right angle cable using RG178 coax. This Pasternack reverse polarity MCX jack bulkhead to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity jack MCX bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11831 MCX reverse polarity jack bulkhead to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE6TR1183 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Impedance: 50 Ohm, Maximum Frequency: 6 GHz, Maximum VSWR: 1.25:1, Minimum Frequency: DC, Maximum Power: 5 Watt, Body Material: Brass, Connector Series: N, Connector Gender: Male, Temperature, Max Operating: 75 deg C, Temperature, Min Operating: -40 deg C. 5 Watt RF Load (Termination) Up to 6 GHz With N Male Input Black Anodized Aluminum Body. Pasternack’s PE6TR1183 RF load termination (also known as a dummy load) has a N-type male connector. This Pasternack N-type male load / termination is rated for a maximum frequency of 6 GHz. Our N-type male termination load is a RF load termination with a 50 Ohm impedance. The max input power rating (CW) of this RF termination is 5 Watts. Make your online purchase right now to take advantage of our same-day shipping. This N-type terminator is manufactured with a black anodized aluminum housing body. Pasternack's 50 Ohm N-type coaxial termination has a maximum input power (CW) of 5 Watts and a maximum VSWR of 1.25:1. This connectorized RF termination is commonly used to terminate devices such as couplers, circulators, hybrids, and combiners. Additional dimensions and specifications for this RF load termination are on our downloadable PDF datasheet above. Pasternack's PE6TR1183 terminator has a N-type connector and is designed to withstand temperatures between -40 to +75 deg C. Our RF load termination is an indispensable component in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce signal integrity. This 5 Watts RF termination has a heatsink body that is designed to provide adequate heat dissipation within its full frequency of operation. Our radio frequency termination is suitable for 5G cellular bands, SatCom, radar systems, test and measurement, commercial and military communication, DAS systems applications. Pasternack is where to buy a 6 GHz RF load/termination for quick shipment worldwide because this is only one of more than a million RF parts/components we have available. Our 5 watt N-type male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our RF load termination load will ship worldwide the same day as purchased. |
| 0 | ||
| PE3C11183 | Pasternack Enterprises | 0 | ||||
| PE36118-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. MC-Card Plug to MC-Card Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MC-Card cable connection on one end and MC-Card cable connection on the other. Our MC-Card to MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36118-36, can also be known as a MC-Card male to MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36118-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with MC-Card to MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card plug to MC-Card plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MC-Card male to MC-Card male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3C11183/HS | Pasternack Enterprises | 0 | ||||
| PE3W11831/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity MCX Jack Bulkhead to SMA Male Right Angle Cable Using RG178 Coax with HeatShrink. PE3W11831/HS is a reverse polarity MCX jack bulkhead to SMA male right angle cable using RG178 coax. This Pasternack reverse polarity MCX jack bulkhead to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity jack MCX bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11831/HS MCX reverse polarity jack bulkhead to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE3C11118-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11118-36 low loss SMA female to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11118-36 can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11118-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11118-36 SMA jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11118-36 can also be used in the other direction and will be a TNC male to SMA female cable assembly if the opposite connectivity is required. This low loss SMA jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11835 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to N Male Right Angle Cable Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to N male right angle cable using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to N male right angle cable using RG316 coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and right angle N type cable connection on the other. Our 1.0/2.3 to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W11835 can also be known as a 1.0/2.3 male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to N type plug cable assembly PE3W11835 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11835 can also be used in the other direction and will be right angle N type male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to type N cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug to N male right angle cable using RG316 coax. | 0 | |||
| PE3W11832 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 3.5mm Male to Slide-On BMA Plug Bulkhead Cable Using RG405 Coax. PE3W11832 is a 3.5mm male to BMA plug bulkhead cable using RG405 coax. This Pasternack 3.5mm male to BMA plug bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm BMA for connector 2. Our male 3.5mm to plug BMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W11832 3.5mm male to BMA plug bulkhead cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W21183 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Thread SMA Female Bulkhead Cable Using TCOM-195 Coax. PE3W21183 is a TNC male to reverse thread SMA female bulkhead cable using TCOM-195 coax. This Pasternack TNC male to reverse thread SMA female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to reverse thread female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21183 TNC male to SMA reverse thread female bulkhead cable assembly is constructed with TCOM-195 coax. | 0 | |||
 TE Connectivity | 2118309-4 | TE Connectivity | DUAL BAND WIFI, 2.4 & 5GHZ, PCB W/MHF4 Antenna Type: PCB Band Type: Dual Band Primary Application: Wi-Fi Communication Protocol: Bluetooth Zigbee Wi-Fi Mounting Location: Internal/Embedded PCB Dual Band Wi-Fi Bluetooth | Antenna | Part Number: 2118309-4 | Internal Number: 2118309-4 | TE Connectivity RoHS : Compliant |
| 2,072 | |
| 1776118-3 | TE Connectivity | 3P TERMI-BLOK,PCB,HIGH TEMP Number of Positions: 3 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 3 Header Wire-to-Board .197" | Part Number: 1776118-3 | Internal Number: 1776118-3 | .197" | TE Connectivity RoHS : Compliant |
| 1,721 | ||
| 5650118-3 | TE Connectivity | CONN SEC II 6 POS 100C/L R/A Connector System: Board-to-Board Number of Positions: 12 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 3 A Board-to-Board 12 2.54 mm .1" | Card Edge Power Connector | Part Number: 5650118-3 | Internal Number: 5650118-3 | TE Connectivity RoHS : Compliant |
| 702 | ||
| 2118308-2 | TE Connectivity | 4G WORLD BAND, METASPAN, PCB, W/MHF4L Antenna Type: PCB Band Type: Multi Band Primary Application: Wi-Fi Cat-M/NB-IoT Cellular Communication Protocol: Bluetooth Wi-Fi Cellular Cat-M/NB-IoT Mounting Location: Internal/Embedded PCB Multi Band Wi-Fi Bluetooth | Antenna | Part Number: 2118308-2 | Internal Number: 2118308-2 | TE Connectivity RoHS : Compliant |
| 198 | ||
 Venkel Ltd. | PWCR2512-ZK-1183DT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;118K;�0.5% RoHS : Compliant | 0 | ||
| TFCR0805-10W-C-1183DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-1183DT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-1183FT | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;118K ;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-1183BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;118K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-1183FT | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;118K ;�1% RoHS : Compliant | 0 | |||
| MELFC0102-RE-1183DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TZ-1183BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�15PPM;118K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-1183CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;118K;�0.25% RoHS : Compliant | 0 | |||
| C1812C0G201-183JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;200V;0.018uF;�5% RoHS : Compliant | 0 | |||
| HPTF0603-QC-1183AT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�50PPM;118K ;�0.05% RoHS : Compliant | 0 | |||
| HPTF1206-TN-1183UT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;118K ;�0.01% RoHS : Compliant | 0 | |||
| HPTF1210-UE-1183BT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;118K ;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UN-1183AT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;118K ;�0.05% RoHS : Compliant | 0 | |||
C1812X7R251-183KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;250V;0.018uF;�10% RoHS : Compliant | 0 | |||
 Win Source Electronics | TLV7111830DSER | Texas Instruments | IC REG LIN 1.8V/3V 200MA 6WSON / Over-Current and Thermal Protection RoHS : Compliant |
| 15,000 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼ 
English
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand