20176220ACNUWNTZCWC Price, 销售商, Stock

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) 48" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017-48 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017-48 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 48" cable.

1 : $186.99
25 : $177.64
50 : $168.29
100 : $160.81

155

PE3MP2017-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) 24" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 24" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017-24 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017-24 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 24" cable.

1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17

155

PE3MP2017-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02003 Twinax (.150 O.D.) 36" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2017-36 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2017-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2017-36 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02003 twinax (.150 O.D.) 36" cable.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

155

PE3W20175-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Non-Magnetic Cable 24 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3W20175-24 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W20175-24 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3W20175-24 RF cable has a copper jacket. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W20175-24 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements.

1 : $81.79
25 : $77.7
50 : $73.61
100 : $70.34

PE71S2017

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 2 GHz, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum Input Power: 1 Watts, Maximum Insertion Loss: 3 dB, Minimum Isolation: 30 dB. SPDT PIN Diode Switch Operating From 2 GHz to 26.5 GHz Up to +30 dBm and SMA. PE71S2017 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 2 GHz and a maximum frequency of 26.5 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 100 ns and a maximum input power of 1 Watt (+30 dBm ). Insertion loss maximum of this SMA Reflective switch is 3 dB with an isolation minimum of 30 dB. Reflective PIN diode radio frequency switch PE71S2017 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $3,380.0
5 : $3,244.8
10 : $3,109.6

PE80L2017

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Maximum Insertion Loss: 1.1 dB, Design Type: High Power, Peak Power: 100 Watt, Leakage (CW): 18 dBm. High Power Limiter, SMA, 100W Peak Power, 18 dBm Flat Leakage, 2 GHz to 4 GHz. The PE80L2017 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2017 is a high power coaxial RF power limiter with a maximum insertion loss of 1.1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. This high-quality radio frequency limiter is constructed of copper and has a maximum leakage power of 18 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.9 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.4:1 and whereas the typical output VSWR is 1.5:1. This high power limiter is 1.26 inches long, 0.71 inches wide, and 0.55 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements.

1 : $4,050.0
5 : $3,969.0
10 : $3,888.0
25 : $3,807.0

PE3W20176

Pasternack Enterprises

Key Specifications, Connector Series 1: BMMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. BMMA Male Bulkhead to SMA Male Cable Using RG405 Coax. PE3W20176 is a BMMA male bulkhead to SMA male cable using RG405 coax. This Pasternack BMMA male bulkhead to SMA male cable assembly uses a 50 Ohm BMMA for connector 1 and a 50 Ohm SMA for connector 2. Our male BMMA bulkhead to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20176 BMMA male bulkhead to SMA male cable assembly is constructed with RG405 coax.

PE3W20179

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX007, RF Cable Type: 141LL SR, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using 141 Coax. PE3W20179 is a N male to SMA male right angle cable using 141LL SR coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20179 N male to SMA male right angle cable assembly is constructed with 141LL SR coax.

PE3W20178LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using PE-C100-LSZH Coax with HeatShrink, LF Solder. PE3W20178LF/HS is a SMA female to SMA female cable using PE-C100-LSZH coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20178LF/HS SMA female to SMA female cable assembly is constructed with PE-C100-LSZH coax.

PE3W20177

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. QMA Male to Mini UHF Female Cable Using LMR-195-UF Coax. PE3W20177 is a QMA male to Mini UHF female cable using LMR-195-UF coax. This Pasternack QMA male to Mini UHF female cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male QMA to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20177 QMA male to Mini UHF female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02017

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Male to MCX Plug Right Angle Cable Using LMR-100 Coax. PE3W02017 is a TNC male to MCX plug right angle cable using LMR-100A coax. This Pasternack TNC male to MCX plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MCX for connector 2. TNC to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02017 TNC male to MCX plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20170

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to SMA Male Cable Using PE-034SR Coax. PE3W20170 is a 2.92mm male right angle to SMA male cable using PE-034SR coax. This Pasternack 2.92mm male right angle to SMA male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20170 2.92mm male right angle to SMA male cable assembly is constructed with PE-034SR coax.

PE3W22017

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 1.85mm Female Bulkhead to BNC Female Bulkhead Cable Using PE-P086HF Coax. PE3W22017 is a 1.85mm female bulkhead to BNC female bulkhead cable using PE-P086HF coax. This Pasternack 1.85mm female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm BNC for connector 2. Our female 1.85mm bulkhead to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22017 1.85mm female bulkhead to BNC female bulkhead cable assembly is constructed with PE-P086HF coax.

PE88X2017

Pasternack Enterprises

Key Specifications, Input Frequency, Min: 450 MHz, Input Frequency, Max: 600 MHz, Output Frequency, Min: 1.35 GHz, Output Frequency, Max: 1.8 GHz, Input VSWR, Max: 1.8, Output VSWR, MAX: 2.2. Active 3x Frequency Multiplier, 1350 MHz to 1800 MHz Output Frequency, 9 dB Conversion Gain, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2017 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 450 MHz and a maximum frequency input of 600 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 1.35 GHz and output maximum frequency of 1.8 GHz. SMA frequency doubler / multiplier PE88X2017 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts.

1 : $620.99
5 : $596.15
10 : $571.31
25 : $546.47

PE-T2017

Pasternack Enterprises

1 : $222.99
10 : $214.07
25 : $205.15

Venkel Ltd.

C0402HQN201-7R7BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.7pF;�0.1pF
RoHS : Compliant

C0402HQN201-7R6BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.6pF;�0.1pF
RoHS : Compliant

C0402HQN201-7R0DNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7pF;�0.5pF
RoHS : Compliant

C0402HQN201-7R1CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.1pF;�0.25pF
RoHS : Compliant

C0402HQN201-7R5BNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0402;HQN;200V;7.5pF;�0.1pF
RoHS : Compliant

C1111HQN201-7R0BNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;200V;7pF;�0.1pF
RoHS : Compliant

C0402HQN201-7R0BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7pF;�0.1pF
RoHS : Compliant

C0402HQN201-7R8DNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.8pF;�0.5pF
RoHS : Compliant

C0402HQN201-7R2BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.2pF;�0.1pF
RoHS : Compliant

C0402HQN201-7R0CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7pF;�0.25pF
RoHS : Compliant

C0402HQN201-7R9CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.9pF;�0.25pF
RoHS : Compliant

C0402HQN201-7R8CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.8pF;�0.25pF
RoHS : Compliant

C0402HQN201-7R4CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.4pF;�0.25pF
RoHS : Compliant

C0402HQN201-7R1BNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.1pF;�0.1pF
RoHS : Compliant

C0402HQN201-7R9DNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;7.9pF;�0.5pF
RoHS : Compliant

Vyrian

HCTL-2017-PLC

Broadcom Limited

Interface Circuit, CMOS, PQCC20
RoHS : Compliant

9,821

SSM2017S-REEL

Analog Devices Inc

Audio Preamplifier, 1 Channel(s), Bipolar, PDSO16
RoHS : Not Compliant

9,701

M28F201-70XK1

STMicroelectronics

RoHS : Not Compliant

8,971

REF020171Z:08

Analog Devices Inc

8,492

M28F201-70XN6TR

STMicroelectronics

8,364

2201739

Phoenix Contact

Enclosures/Accessories
RoHS : Compliant

8,281

2PS12017E44G35911NOSA1

Infineon Technologies AG

Insulated Gate Bipolar Transistor, 1700A I(C), 1700V V(BR)CES
RoHS : Not Compliant

7,657

TMS28F020-17C4FME

Texas Instruments

Flash, 256KX8, 170ns, PQCC32
RoHS : Not Compliant

7,132

TMS28F020-17C4DDE4

Texas Instruments

Flash, 256KX8, 170ns, PDSO32
RoHS : Compliant

6,661

M28F201-70K3TR

STMicroelectronics

6,075

SST39VF3201-70-4C-EKE-T

Microchip Technology Inc

Flash, 2MX16, 70ns, PDSO48
RoHS : Compliant

5,801

TRF372017EVM

Texas Instruments

Development kits/Accessories

5,564

TEA2017DB1580

NXP Semiconductors

4,033

M28F201-70XN6

STMicroelectronics

RoHS : Not Compliant

3,669

M28F201-70XN6R

STMicroelectronics

RoHS : Not Compliant

3,573

Waytek, Inc.

20170

Hillsdale Terminal & Tool Inc

The Standard Vinyl Butt Connector is an insulated crimp splice designed to securely join 1614 Ga. wires in low-voltage electrical systems. Featuring a butted seam barrel with blue vinyl insulation, it provides reliable conductivity and protection against abrasion and corrosion. The color-coded design ensures quick size identification and consistent crimp performance, making it ideal for automotive, marine, and industrial wiring applications.

100 : $0.0581
200 : $0.0508
500 : $0.0472
1,000 : $0.0463
5,000 : $0.0439

126,674