2041FGD-R Price, 销售商, Stock

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. MCX Jack Bulkhead to Trimmed Lead Cable 6 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly MCX jack bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX jack bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX bulkhead cable connection on one end and trimmed lead cable connection on the other. Our MCX to trimmed lead cable assemblies have a jack gender on end 1 and sexless on end 2. PE3C9204/HS-6 can also be known as a MCX female to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. MCX female to trimmed lead sexless cable assembly PE3C9204/HS-6 is built with RG178 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MCX jack bulkhead to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9204/HS-6 can also be used in the other direction and will be trimmed lead sexless to MCX jack bulkhead cable assembly if the opposite connectivity is required. MCX female bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to trimmed lead cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX jack bulkhead to trimmed lead cable 6 inch length using RG178 coax with heatshrink.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

269

PE36120-48

Pasternack Enterprises

Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. MC-Card Plug to MC-Card Plug Right Angle Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly MC-Card plug to MC-Card plug right angle cable 48 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug to MC-Card plug right angle cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MC-Card cable connection on one end and right angle MC-Card cable connection on the other. Our MC-Card to right angle MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36120-48, can also be known as a MC-Card male to right angle MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36120-48 is built with RG174 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with MC-Card to right angle MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card plug to MC-Card right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36120-48 can also be used in the other direction and will be right angle MC-Card plug to MC-Card plug cable assembly if the opposite connectivity is required. MC-Card male to MC-Card right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug to MC-Card plug right angle cable 48 inch length using RG174 coax.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3W20442LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG316 Coax, LF Solder. PE3W20442LF is a SMA male to SMA female bulkhead cable using RG316 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20442LF SMA male to SMA female bulkhead cable assembly is constructed with RG316 coax.

PE3W20482

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Jack to SMC Jack Cable Using RG316 Coax. PE3W20482 is a SMB jack to SMC jack cable using RG316 coax. This Pasternack SMB jack to SMC jack cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMC for connector 2. Our jack SMB to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20482 SMB jack to SMC jack cable assembly is constructed with RG316 coax.

PE3W22204LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Cable Using PE-P086HF Coax with HeatShrink, LF Solder. PE3W22204LF/HS is a TNC male right angle to TNC male right angle cable using PE-P086HF coax. This Pasternack TNC male right angle to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22204LF/HS TNC male right angle to TNC male right angle cable assembly is constructed with PE-P086HF coax.

PE4204

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: BNC, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: PE-SR402AL, Interface Type 2: PE-SR402FL, Interface Type 3: RG402. BNC Female Connector Clamp/Solder Attachment For PE-SR402AL, PE-SR402FL, RG402. PE4204 BNC female coaxial connector has an interface type of PE-SR402AL, PE-SR402FL, RG402 and a 50 Ohm impedance. Pasternack BNC female connector uses shield/contact clamp/solder as an attachment method. The Pasternack BNC coaxial connector has a brass body with nickel plating. This BNC female coaxial RF connector is REACH compliant. This Pasternack female BNC connector will ship the same day as purchased. Our BNC female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BNC connector cable assemblies that will ship the same day as well.

1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95

PE71S2047

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 30 MHz, Maximum Frequency: 530 MHz, Impedance: 50 Ohm, Maximum Input Power: 5 Watts, Maximum Input VSWR: 1.5:1, Maximum Insertion Loss: 1 dB. SPDT PIN Diode Switch Operating from 30 MHz to 530 MHz Up to 5 Watts (+37 dBm) and SMA. PE71S2047 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 30 MHz and a maximum frequency of 530 MHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 200 ns and a maximum input power of 5 Watts (+37 dBm ). Insertion loss maximum of this SMA Reflective switch is 1 dB with an isolation minimum of dB. Reflective PIN diode radio frequency switch PE71S2047 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $1,360.0
5 : $1,305.6
10 : $1,251.2

PEWGA3204

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-15, Low Max Noise Figure : 5.5 dB, Waveguide Frequency Band : V, Minimum Frequency : 50 GHz, Max Frequency : 75 GHz, Small Signal Gain: 31 dB, Flange Type and Size: UG-385/U Flange, Saturated Output Power: 13 dBm, Typical Output Power: 14 dBm. 5 dB Low Noise Amplifier (LNA), 50 to 75 GHz Frequencies in V Band, WR-15 Waveguide connectors with UG-385/U Flanges, 31 dB Gain., PEWGA3204 by Pasternack is a mid-power Waveguide Low Noise Amplifier (LNA) with a frequency band of V eligible for same day shipping worldwide. This WR-15 high frequency (HF) waveguide LNA operates between the frequencies of 50 GHz – 75 GHz with a typical gain of 31 dB. The PEWGA3204 V band LNA operates between -40 deg C to 80 deg C. Pasternack's 50 GHz – 75 GHz low noise amplifiers have a maximum noise figure of only 5.5 dB and a typical gain of 31 dB. The waveguide WR-15 low noise 5.5 dB amp has a max 12 Vdc integrated voltage regulation with 90 mA of typical operating Vdc current. This high reliability V band LNA maintains 31 dB of gain, and an exceptionally low 5.5 dB figure of noise; it's design is unconditionally stable, exhibiting an impressive 13 dBm of saturated power output (Psat). This HF LNA PEWGA3204 expresses a max 12 Vdc of voltage supply with 13 dBm of typical power output and it's V-band low noise figure amplification is designed for use in military, labs, telecom infrastructure, and even space applications. Contact Pasternack's knowledgeable support staff for assistance with this 75 GHz V-band frequency, 5.5 dB noise figure WR-15 amplifier. Download our UG-385/U RF LNA PDF datasheet PEWGA3204 with specifications and our CAD drawing of the of this 5.5 dB waveguide low noise UG-385/U amplifier with dimensions for details. The 90 mA WR-15 high frequency LNA is built to be sturdy and is designed for dozens of applications with its WR-15 I/O waveguide ports for UG-385/U waveguide flanges. Our 90 mA aluminum waveguide LNA's dimensions and size specifications: 1.5 inches long, 0.937 inches tall, 1.5 inches wide, and weight of 0.2 lbs. Order your resilient, high-reliability 50 GHz 75 GHz low noise amplifiers today, through the website or by phone; we're ready to pack and ship these high-quality low noise 90 mA WR-15 waveguide amplifier LNA's anywhere in the world. This low noise 90 mA RF amplifier is ready for same day purchase and is complete with a maximum noise figure no more than 5.5 dB. Pasternack's PEWGA3204 waveguide HF LNA is housed within aluminum and plated with gold, which makes for a sturdy and reliable unit. This 50 GHz – 75 GHz V band LNA with 13 dBm power is part of over 100,000 RF, microwave, and millimeter wave components that we keep in stock. Pasternack stocks a wide array of small 31 dB signal low noise amplifier products that ship same day from our warehouse for all your RF, microwave, and millimeter wave WR-15 LNA needs.

1 : $15,200.0
5 : $14,592.0
10 : $13,984.0
25 : $13,376.0

PE3W12044/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable 6 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly smooth bore SMP male bulkhead to 2.92mm male cable 6 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to 2.92mm male cable 6 inch length using RG405 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and 2.92mm cable connection on the other. Our SMP to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W12044/HS-6 can also be known as a SMP plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP plug to 2.92mm plug cable assembly PE3W12044/HS-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12044/HS-6 can also be used in the other direction and will be 2.92mm male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to 2.92mm male cable 6 inch length using RG405 coax with heatshrink.

1 : $271.99
25 : $258.39
50 : $244.79
100 : $233.91

PE3W20420

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Mini SMP Female Right Angle Cable Using PE-SR047FL Coax. PE3W20420 is a Mini SMP female right angle to Mini SMP female right angle cable using PE-SR047FL coax. This Pasternack Mini SMP female right angle to Mini SMP female right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Mini SMP right angle to Mini SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to female Mini SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20420 Mini SMP female right angle to Mini SMP female right angle cable assembly is constructed with PE-SR047FL coax.

PE3W20457

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to TNC Female Cable Using LMR-240-FR Coax. PE3W20457 is a reverse polarity TNC male to TNC female cable using LMR-240-FR coax. This Pasternack reverse polarity TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20457 TNC reverse polarity male to TNC female cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22040

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to Snap-On MMBX Plug Cable Using PE-SR405AL Coax. PE3W22040 is a SMP female right angle to MMBX plug cable using PE-SR405AL coax. This Pasternack SMP female right angle to MMBX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MMBX for connector 2. SMP right angle to MMBX coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to plug MMBX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22040 SMP female right angle to MMBX plug cable assembly is constructed with PE-SR405AL coax.

PE3W20416/PH45

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 1.0/2.3 Male Right Angle Cable Using LMR-195 Coax with 45 Deg. Clock. PE3W20416/PH45 is a 1.0/2.3 male right angle to 1.0/2.3 male right angle cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20416/PH45 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20416/PH90

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 1.0/2.3 Male Right Angle Cable Using LMR-195 Coax with 90 Deg. Clock. PE3W20416/PH90 is a 1.0/2.3 male right angle to 1.0/2.3 male right angle cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. 1.0/2.3 right angle to 1.0/2.3 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 1.0/2.3 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20416/PH90 1.0/2.3 male right angle to 1.0/2.3 male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20456

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Polarity SMA Female Cable Using LMR-100A-UF Coax. PE3W20456 is a SMA female to reverse polarity SMA female cable using LMR-100A-UF coax. This Pasternack SMA female to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20456 SMA female to SMA reverse polarity female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

TE Connectivity

1-282045-1

TE Connectivity

AMP MONO-SHAPE P.C.B.CONN5P. G TE Connectivity
RoHS : Compliant

2,500 : $0.74
1,000 : $0.86
500 : $0.97
250 : $1.02
100 : $1.16
50 : $1.27
25 : $1.36
10 : $1.53
1 : $1.68

40,248

1-34204-0

TE Connectivity

SPLICE,PG BUTT 16-14 Primary Product Color: Blue Splice Type: Butt Splice Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Blue Butt Splice 16 – 14 AWG 1.25 – 2 mm² | TE Connectivity
RoHS : Compliant

2,500 : $0.8
1,000 : $0.82
500 : $0.84
250 : $0.86
100 : $0.88
50 : $0.91
25 : $0.93
10 : $0.95
1 : $0.97

7,170

1-521204-1

TE Connectivity

RAST 5,HSG,2P,GWT POSILOCK MKI Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature 2 Receptacle Housing With | TE Connectivity
RoHS : Compliant

2,500 : $0.24
1,000 : $0.28
500 : $0.32
250 : $0.33
100 : $0.38
50 : $0.41
25 : $0.44
10 : $0.49
1 : $0.54

6,071

1-1375820-4

TE Connectivity

CST-100 II HOUSING 14 POS Number of Positions: 14 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature 14 Receptacle Housing With | TE Connectivity
RoHS : Compliant

2,500 : $0.49
1,000 : $0.58
500 : $0.65
250 : $0.68
100 : $0.78
50 : $0.85
25 : $0.91
10 : $1.02
1 : $1.13

1,860

10142048-22

TE Connectivity

HTU31D I.C 31D RH/T DIGITAL R5000 Humidity Sensor Product Type: RH Temperature Module Supply Voltage (Peak): 5.5 VDC Operating Temperature Range: -40 – 125 °C Accuracy: ±2 %RH Interface Signal Type: Digital RH Temperature Module 5.5 VDC | TE Connectivity
RoHS : Compliant

1 : $2.32

1,846

1-2040586-1

TE Connectivity

DYNAMIC D4200 TAB CONT S/LP LONG Contact Mating Area Plating Material: Gold (Au) Contact Type: Tab Wire Size: 20 – 16 AWG Wire Size: .5 – 1.42 mm² Product Terminates To: Wire & Cable Gold (Au) Tab 20 – 16 AWG .5 – 1.42 mm² | TE Connectivity
RoHS : Compliant

25,000 : $2.12
10,000 : $2.16
5,000 : $2.21
2,500 : $2.25
1,000 : $2.29
500 : $2.34
250 : $2.38
100 : $2.42
50 : $2.47
25 : $2.51
10 : $2.55
1 : $2.6

1,661

10142048-31

TE Connectivity

HTU31V I.C 31V RH/T ANALOG R1500 Humidity Sensor Product Type: RH Temperature Module Supply Voltage (Peak): 5.5 VDC Operating Temperature Range: -40 – 125 °C Accuracy: ±2 %RH Interface Signal Type: Analog RH Temperature Module 5.5 VDC | TE Connectivity
RoHS : Compliant

1 : $3.72

1,361

1-2040016-2

TE Connectivity

DYNAMIC D4200 TAB CONT S LONG Contact Mating Area Plating Material: Gold (Au) Contact Type: Tab Wire Size: 20 – 16 AWG Wire Size: .5 – 1.42 mm² Product Terminates To: Wire & Cable Gold (Au) Tab 20 – 16 AWG .5 – 1.42 mm² | TE Connectivity
RoHS : Compliant

25,000 : $1.7
10,000 : $1.73
5,000 : $1.77
2,500 : $1.8
1,000 : $1.83
500 : $1.87
250 : $1.9
100 : $1.94
50 : $1.97
25 : $2.01
10 : $2.04
1 : $2.08

1,346

10142048-21

TE Connectivity

HTU31D I.C 31D RH/T DIGITAL R1500 Humidity Sensor Product Type: RH Temperature Module Supply Voltage (Peak): 5.5 VDC Operating Temperature Range: -40 – 125 °C Accuracy: ±2 %RH Interface Signal Type: Digital RH Temperature Module 5.5 VDC | TE Connectivity
RoHS : Compliant

1 : $3.84

1,211

1-2040516-5

TE Connectivity

DYNAMIC 1100D HDR ASSY V 10PX BLACK GOLD PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 10 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $5.03
500 : $5.18
250 : $5.33
100 : $5.49
50 : $5.64
25 : $5.79
10 : $5.94
1 : $6.09

1,202

1-2040444-4

TE Connectivity

DYNAMIC 1500T TAB HSG 12PX F/H Number of Positions: 12 Connector & Housing Type: Housing for Male Terminals Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp 12 Housing for Male Terminals With | TE Connectivity
RoHS : Compliant

1,000 : $2.01
500 : $2.07
250 : $2.13
100 : $2.2
50 : $2.26
25 : $2.32
10 : $2.38
1 : $2.44

1,042

10142048-20

TE Connectivity

HTU31D I.C 31D RH/T DIGITAL R400 Humidity Sensor Product Type: RH Temperature Module Supply Voltage (Peak): 5.5 VDC Operating Temperature Range: -40 – 125 °C Accuracy: ±2 %RH Interface Signal Type: Digital RH Temperature Module 5.5 VDC | TE Connectivity
RoHS : Compliant

1 : $4.47

422

1-2040516-9

TE Connectivity

DYNAMIC 1100D HDR ASSY V 18PX BLACK GOLD PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 18 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 18 | Ampseal Header | TE Connectivity
RoHS : Compliant

500 : $10.6
250 : $10.97
100 : $11.34
50 : $11.7
25 : $12.07
10 : $12.43
1 : $12.8

134

1-2112041-2

TE Connectivity

26POS, MIXED,TAB HSG,ASSY,SEALED Nominal Voltage Architecture: 12 V 24 V Number of Positions: 26 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 5.8 mm 1.6 mm 2.8 mm Ampseal Header | 12 V 26 Housing for Male Terminals | 5.8 mm | TE Connectivity
RoHS : Compliant

1 : $16.56

T2040012040-000

TE Connectivity

DMF-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Socket 12 AWG | TE Connectivity
RoHS : Compliant

1,000 : $9.79
500 : $10.08
250 : $10.38
100 : $10.68
50 : $10.97
25 : $11.27
10 : $11.57
1 : $11.86

2041FGD-R 销售商

链接网址