| 数据搜索系统,热门电子元器件搜索 |
|
244L-S20-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() DigiKey | POM-2244L-C33-R | PUI Audio | MIC COND ANLG OMNI -44DB 0.236"D |
| 31,488 | |
| TLP292-4(4LGBTRE | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO |
| 5,996 | ||
| TLP292-4(4LGBTRE | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO |
| 5,996 | ||
| 74FCT162244LBETPV | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 5,086 | ||
| 74FCT162244LBCTPV | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 5,028 | ||
| 74FCT16244LBATPV | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 3,754 | ||
| QM2244LEV-25.0M | Pletronics Inc | XTAL OSC XO 25.0000MHZ CMOS TTL |
| 3,000 | ||
| CY8C3244LTI-130 | Infineon Technologies AG | IC MCU 8BIT 16KB FLASH 68QFN RoHS : Compliant |
| 2,519 | ||
| 74FCT166244LCTPA | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 1,884 | ||
| 74FCT162244LBATPA | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 1,546 | ||
| PI3CH3244LEX | Diodes Incorporated | IC SWITCH SPST 8 OHM 20TSSOP RoHS : Compliant |
| 854 | ||
| PI3CH3244LEX | Diodes Incorporated | IC SWITCH SPST 8 OHM 20TSSOP RoHS : Compliant |
| 854 | ||
| S32M244LCABWKHST | FLIP ELECTRONICS | SoC, CMOS, PQFP64 |
| 160 | ||
| ESW-102-44-L-S | Samtec Inc | CONN SOCKET 2POS 0.1 GOLD PCB RoHS : Compliant |
| 114 | ||
| ESQ-112-44-L-D | Samtec Inc | CONN SOCKET 24POS 0.1 GOLD PCB RoHS : Compliant |
| 14 | ||
![]() Avnet Americas | POM-2244L-C33-R | PUI Audio | Microphone, Omnidirectional, 50 Hz to 16 kHz, 2 VDC to 10 VDC, 2.2 kohm, -44 dB, 200 ?A - Boxed Product (Development Kits) (Alt: POM-2244L-C33-R) RoHS : Compliant |
| 13,080 | |
| S32M244LCABWKHST | NXP Semiconductors | - Trays (Alt: S32M244LCABWKHST) RoHS : Compliant |
| 0 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | - Bulk (Alt: 58AJ1567) RoHS : Compliant |
| 0 | ||
| CY8C3244LTI-123 | Infineon Technologies AG | - Trays (Alt: CY8C3244LTI-123) RoHS : Compliant |
| 0 | ||
| PI3CH3244LEX | Diodes Incorporated | - Tape and Reel (Alt: PI3CH3244LEX) RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-D | Samtec Inc | Board Stackers & Spacers, Socket Strip, 2.54 mm, 24 Contacts, Solder, 2 Rows, 2.54 mm, ESQ Series - Rail/Tube (Alt: ESQ-112-44-L-D) RoHS : Compliant |
| 0 | ||
| ESQ-122-44-L-D-LL | Samtec Inc | - Rail/Tube (Alt: ESQ-122-44-L-D-LL) RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-S-LL | Samtec Inc | - Rail/Tube (Alt: ESQ-112-44-L-S-LL) RoHS : Compliant |
| 0 | ||
| 54ABT244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, W/3- - Rail/Tube (Alt: 54ABT244LMQB) RoHS : Not Compliant | 0 | |||
| CY8C3244LTI-123 | Infineon Technologies AG | - Trays (Alt: CY8C3244LTI-123) RoHS : Compliant |
| 0 | ||
| PI74FCT3244LE | Diodes Incorporated | 8-Bit Buffer/Line Driver 2-Channel Non-Inverting 3-State CMOS 20-Pin TSSOP Tube - Rail/Tube (Alt: PI74FCT3244LE) RoHS : Compliant | 0 | |||
| CY8C3244LTI-130 | Infineon Technologies AG | - Trays (Alt: CY8C3244LTI-130) RoHS : Compliant |
| 0 | ||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP292-4(4LGBTPE) RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LU-3-1 | Samtec Inc | - Bulk (Alt: ARC6-08-24.4-LU-LU-3-1) RoHS : Compliant |
| 0 | ||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU, S32M2 Family S32M24x Series Microcontrollers, ARM Cortex-M4F, 32 bit, 80 MHz, 512 KB - Trays (Alt: S32M244LCABWKHST) RoHS : Compliant |
| 0 | ||
![]() Newark | CY8C6244LQI-S4D92 | Infineon Technologies AG | PROGRAMMABLE SOC, 48MHZ, QFN-EP-68; RoHS : Compliant |
| 1,207 | |
| S32M244LCABWKHST | NXP Semiconductors | MCU, 32BIT, 80MHZ, LQFP-EP-64; RoHS : Compliant |
| 160 | ||
| S32M244LCABWKHST | NXP Semiconductors | MCU, 32BIT, 80MHZ, LQFP-EP-64; RoHS : Compliant |
| 160 | ||
| POM-2244L-C33-R | PUI Audio | MICROPHONE, ECM, OMNIDIRECTIONAL, 2K2; RoHS : Compliant |
| 60 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | RF ANTENNAS, 5.15-5.85GHZ, ADHESIVE; Antenna Type:GNSS / LTE / WiFi; Frequency Min:5.15GHz; Frequency Max:5.85GHz; Antenna Mounting:Adhesive; Gain:2dBi; VSWR:2; Input Power:-; Input Impedance:50ohm; Antenna Polarization:- RoHS Compliant: Yes RoHS : Compliant |
| 47 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | EXTERNAL ANTENNA, 2.3GHZ-2.69GHZ, 4.6DBI; RoHS : Compliant |
| 39 | ||
| AOM-5244L-R | Projects Unlimited | MICROPHONE, ECM, OMNI, -44DB/4.5 - 10VDC; Microphone Type:ECM; Directivity:Omnidirectional; Acoustic Overload Point (AOP):110dB; Supply Voltage Min:4.5VDC; Supply Voltage Max:10VDC; Sensitivity (dB):-44dB; Impedance:1kohm RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| ALI 2.244-LIS | Fluke Calibration | OFFSET ADAPTER FOR SHAFT WITH LONG BARS; RoHS : Not Compliant |
| 0 | ||
![]() NXP Semiconductors | S32M244LCABWKHST | NXP Semiconductors | S32M24 Arm Cortex-M4 with FPU, 80 MHz, 512 KB Flash, LIN, CSEC security, 64 LQFP-EP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 919 | |
![]() RS | 244L100 | Goodyear Belts | SYNCHRONOUS BELT, L SECTION, 25 MM WIDTH, 9.53 MM PITCH, 65 TEETH, 620 MM LENGT |
| 0 | |
| 244L050 | Goodyear Belts | SYNCHRONOUS BELT, L SECTION, 13 MM WIDTH, 9.53 MM PITCH, 65 TEETH, 620 MM LENGT |
| 0 | ||
| 244L075 | Goodyear Belts | SYNCHRONOUS BELT, L SECTION, 19 MM WIDTH, 9.53 MM PITCH, 65 TEETH, 620 MM LENGT |
| 0 | ||
| 244L075G | B&B Electronics Manufacturing Company | TIMING BELT, 0.750" BELT WIDTH, 65 TEETH, 24.375" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 68046244LF | Amphenol FCi | DUBOX RECPT, VERT.-DR, SMT, 15 GOLD, 88 POS |
| 0 | ||
| 89009244LF | Amphenol FCi | 89009-244LF-METRAL HDR 5RX8M PF |
| 0 | ||
| 68685244LF | Amphenol FCi | DUBOX RECPT, VERT.-SR, TH, 15 GOLD, 44 POS |
| 0 | ||
| 71922244LF | Amphenol FCi | QUICKIE |
| 0 | ||
| 64991G244LF | Amphenol FCi | Header 48pos |
| 0 | ||
| 101379261244LF | Amphenol FCi | Wire to Board, Dual row, Vertical SMT Tails and Hold Down, 12 positions |
| 0 | ||
| 101379262244LF | Amphenol FCi | Wire to Board, Dual row, Vertical SMT Tails and Hold Down, 22 positions |
| 0 | ||
| 0230-06014 (244L 40/1 B WR 56C) | Hub City | RIGHT ANGLE GEARBOX, 40:1 RATIO, SHAFT OUT, 56C FRAME, 0.625 IN INPUT |
| 0 | ||
| LTIHK50-1S-BL-RC-FW BLK/18V (THL-55679244|LTIHK50-1S-BL-RC-FW BLK/18V|LTIHK501SB | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
| LTILA71-1S-WH-RC-NBL/18V (RLL-49227244|LTILA71-1S-WH-RC-NBL/18V|LTILA711SWHRCNBL | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
| LTIGK54-1L-BL-AM-FN/125N (TGL-53730244|LTIGK54-1L-BL-AM-FN/125N|LTIGK541LBLAMFN/ | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Microchip Technology Inc | ZL30244LFG7 | Microchip Technology Inc | Dual Channel Any-Rate Clk Multiplier, VFLGA, Projected EOL: 2046-04-25 - Contact for Pricing RoHS : Compliant | 0 | ||
| ZL30244LFF7 | Microchip Technology Inc | Dual Channel Any-Rate Clk Multiplier, VFLGA, Projected EOL: 2046-04-25 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | S32M244LCABWKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 512kB (512k x 8) 80MHz 64-QFP Tray RoHS : Compliant |
| 1,078 | |
| A1244LLHLX-I1-T | Allegro MicroSystems LLC | Hall Effect Sensor, -8mT Min, 8mT Max, BICMOS, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount RoHS : Compliant |
| 9,108 | ||
| 74FCT162244LBATPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,546 | ||
| 74FCT162244LBATPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 510 | ||
| 74FCT162244LBCPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,635 | ||
| 74FCT162244LBCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 5,028 | ||
| 74FCT162244LBETPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,449 | ||
| 74FCT162244LBETPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 5,086 | ||
| 74FCT16244LBATPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,207 | ||
| 74FCT16244LBATPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 3,754 | ||
| 74FCT16244LBCTPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,426 | ||
| 74FCT166244LBCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 413 | ||
| 74FCT166244LCTPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,884 | ||
| 74FCT166244LCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 529 | ||
| 54F2244LMQB | National Semiconductor Corporation | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant |
| 39 | ||
![]() TME | BS-244L-B | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; black; 28mm |
| 4,672 | |
| BS-244L-R | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; red; 28mm |
| 1,162 | ||
| BS-244L-Y | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; yellow; 28mm |
| 792 | ||
| 71918-244LF | Amphenol Corporation | Connector: IDC; male; PIN: 44; Quickie; straight; 2.54mm; UL94V-0 |
| 315 | ||
| CY8C4244LQI-443 | Infineon Technologies AG | IC: PSoC microcontroller; 48MHz; QFN40; 4kBSRAM,16kBFLASH RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| ARC6-24-24.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 74; 619.76mm; Insulation: PVC; blue; gold-plated; 34AWG RoHS : Compliant |
| 0 | ||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | Optocoupler; SMD; Ch: 4; Uinsul: 3.75kV; Uce: 80V; SO16; 50mA RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D82 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| CHOT 24.4 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for cable; for latch |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 619.76mm; Insulation: PVC; blue; gold-plated; 34AWG RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| CHVT 24.4 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for cable; for latch |
| 0 | ||
![]() Interstate Connecting Components | 710FS393NF2424-4L | Glenair Inc | GTK CONDUIT FITTING |
| 3 | |
| 55/9952-24-4(LAT3) | TE Connectivity | 55/9952-24-4(LAT3) RoHS : Compliant | 0 | |||
| 55/9960-24-4(LAT3) | TE Connectivity | 55/9960-24-4(LAT3) RoHS : Compliant | 0 | |||
| MDM-25SH244LH-A174 | ITT Interconnect Solutions | MDM-25SH244LH-A174 | 0 | |||
| 10137926-0244LF | Amphenol FCi | 10137926-0244LF-MTK3.0 2P VT S | 0 | |||
| ALBFLB244LW | Amphenol PCD | FAIRLEAD BLOCK | 0 | |||
![]() PEI Genesis | S1997F2244L8 | SOURIAU-SUNBANK |
| 0 | ||
| 1124-4LW24 | HellermannTyton |
| 0 | |||
| WA23-244L | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| MDM-25SH244LH-A174 | ITT Interconnect Solutions |
| 0 | |||
| 1124-4L | HellermannTyton |
| 0 | |||
![]() Powell Electronics | ESQ-102-44-L-D | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 116 | |
| ESW-102-44-L-D-LL | Samtec Inc | PCB Header, Elevated, Socket, Wide RoHS : Compliant |
| 95 | ||
| ESW-102-44-L-S | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 60 | ||
| ESQ-102-44-L-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 59 | ||
| ESW-112-44-L-D | Samtec Inc | .100 Elevated Skt Strip RoHS : Compliant |
| 51 | ||
| ESQ-112-44-L-D | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 50 | ||
| ESW-122-44-L-D | Samtec Inc | .100 Low Profile Variable Post Height Te RoHS : Compliant |
| 26 | ||
| ESQ-122-44-L-D-LL | Samtec Inc | PCB Header, 2.54mm Pitch, Elevated, Squa RoHS : Compliant |
| 25 | ||
| ESW-132-44-L-D | Samtec Inc | .100 Elevated Skt Strip RoHS : Compliant |
| 25 | ||
| ESQ-132-44-L-D | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 25 | ||
| ESQ-112-44-L-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 24 | ||
| ESQ-112-44-L-S-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 22 | ||
| ESW-132-44-L-S | Samtec Inc | PCB Header, Elevated, Socket, Wide RoHS : Compliant |
| 15 | ||
| ESQ-132-44-L-D-LL | Samtec Inc | PCB Header, 2.54mm Pitch, Elevated, Squa RoHS : Compliant |
| 13 | ||
| 710FS393NF2424-4L | Glenair Inc | ACCESSORIES - GTK CONDUIT FITTING |
| 1 | ||
![]() Richardson RFPD | X1005244-LWA3SX10A2 | Kyocera AVX Components | Antenna External 4.5dBi Gain 960MHz/2170MHz/2690MH RoHS : Compliant | 0 | ||
| MA244.LBIC.002 | Taoglas Antenna Solutions | Antenna Genesis -4.90dBi Gain 806MHz/960MHz/1518MH RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | DV402013244LF | INSTOCK | 1,204 | |||
| ESQ-102-44-L-D | Samtec Inc | INSTOCK RoHS : Compliant | 960 | |||
![]() Avnet Abacus | AOM-5244L-R | PUI Audio | (Alt: AOM-5244L-R) RoHS : Compliant | 0 | ||
| ESW-102-44-L-S | Samtec Inc | (Alt: ESW-102-44-L-S) RoHS : Compliant | 0 | |||
| 77313-122-44LF | Amphenol Corporation | Conn Unshrouded Header HDR 44 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-122-44LF) RoHS : Compliant | 0 | |||
| ESQ-102-44-L-D | Samtec Inc | (Alt: ESQ-102-44-L-D) RoHS : Compliant | 0 | |||
| POM-2244L-C33-R | PUI Audio | Microphone Omnidirectional 50 Hz to 16 kHz 2 VDC to 10 VDC 22 kohm 44 dB 200 A (Alt: POM-2244L-C33-R) RoHS : Compliant | 0 | |||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | (Alt: X1005244-LWA3SX10A2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | (Alt: TLP292-4(4LGBTPE(T) RoHS : Compliant | 0 | ||
| CET00244L110021 | Amphenol Corporation | S SOCKET AMPHENOL CET00244L110021 SMT (Alt: CET00244L110021) RoHS : Compliant | 0 | |||
![]() Avnet Silica | S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | ||
![]() Braemac Americas-Symmetry | X1005244-LWA3SX10A2 | Kyocera AVX Components | 3-in-1 GNSS (Active) / LTE / Wi-Fi Dual Band External antenna, 1m RG174 & CFD-200 cable, SMA & RP-SMA connector RoHS : Compliant |
| 1 | |
| MA244.LBIC.002 | Taoglas Antenna Solutions | MA244 High Temperature Genesis 4in1 GNSS, 2*Cellular, Wi-Fi Adhesive Mount Low-Profile Antenna |
| 0 | ||
![]() EBV Elektronik | CY8C3244LTI-130 | Infineon Technologies AG | (Alt: SP005642079) RoHS : Compliant | 0 | ||
| CY8C4244LQI-443 | Infineon Technologies AG | Processor PSoC 4 RISC 32Bit 48MHz 40Pin QFN EP (Alt: SP005646537) RoHS : Compliant | 0 | |||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | |||
| S32M244LCABWKHSR | NXP Semiconductors | (Alt: S32M244LCABWKHSR) RoHS : Compliant | 0 | |||
| CY8C3244LTI-130T | Infineon Technologies AG | MCU 8Bit PSoC 8051 CISC 16KB Flash 25V33V5V 68Pin QFN EP TR (Alt: SP005642081) RoHS : Compliant | 0 | |||
| CY8C6244LQQ-S4D92 | Infineon Technologies AG | (Alt: SP005650741) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | (Alt: SP005658463) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | (Alt: SP005658461) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D92 | Infineon Technologies AG | MCU 32Bit PSoC6 ARM CortexM4FARM CortexM0 RISC 256KB Flash 17V to 36V QFN 68Pin Tray (Alt: SP005658467) RoHS : Compliant | 0 | |||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | Optocoupler 1CH Open CollectorOUT 3750Vrms 16Pin SOIC TR (Alt: TLP292-4(4LGBTPE(T) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CY8C4244LQI-443 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 258 | ||
| S32M244LCABWKHST | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 160 | |||
| CY8C3244LTI-123 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 3 | |||
![]() Maritex | U74HC244L-D20-T![]() | Unisonic Technologies Co Ltd | Specialty Drivers; U74HC244L-D20-T; UTC |
| 100 | |
![]() Master Electronics | ESQ-112-44-L-T-LL | Samtec Inc | RoHS : Compliant |
| 0 | |
| S1SDT-20-28-GF-02.44-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-15-28-GF-02.44-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-132-44-L-D-LL | Samtec Inc | ELEVATED SOCKET STRIP RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2R-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-102-44-L-D-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-D | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-122-44-L-S | Samtec Inc | PCB Receptacle Elevated Strip Board-to-Board 2.54 mm 1 Rows 22 Contacts Through Hole Mount RoHS : Compliant |
| 0 | ||
| SESDT-15-32-G-24.4-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-122-44-L-D-LL | Samtec Inc | ELEVATED SOCKET STRIP RoHS : Compliant |
| 0 | ||
| SESDT-05-32-G-24.4-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-05-28-GF-02.44-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESW-132-44-L-D | Samtec Inc | .100 Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESW-132-44-L-S-LL | Samtec Inc | Conn Board Stacker RCP 32 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| S1SS-02-28-GF-02.44-L3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3244LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMC Plug to BNC Male Cable 60 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly SMC plug to BNC male cable 60 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 60 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3244LF-60, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3244LF-60 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3244LF-60 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 60 inch length using RG58 coax, RoHS. |
| 31 | |
| PE3C1244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using LMR-400 Coax with HeatShrink, LF Solder. PE3C1244LF/HS is a N female to N female cable using LMR-400 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1244LF/HS N female to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W14244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Female Bulkhead Cable Using Tinned RG405 Coax, LF Solder. PE3W14244LF is a BNC female bulkhead to BNC female bulkhead cable using RG405 Tinned coax. This Pasternack BNC female bulkhead to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to female BNC bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14244LF BNC female bulkhead to BNC female bulkhead cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3C1244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using LMR-400 Coax, LF Solder, RoHS. PE3C1244LF is a N female to N female cable using LMR-400 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1244LF N female to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to C Male Cable Using RG213 Coax, LF Solder. PE3W18244LF is a 7/16 DIN male to C male cable using RG213 coax. This Pasternack 7/16 DIN male to C male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm C for connector 2. Our male 7/16 DIN to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18244LF 7/16 DIN male to C male cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W02244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using RG393 Coax with HeatShrink, LF Solder. PE3W02244LF/HS is a N male to N female cable using RG393 coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02244LF/HS N male to N female cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W03244LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-48 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-48 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W09244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 4.3-10 Male to Snap-On 4.3-10 Male Cable Using SPP-250-LLPL Coax with HeatShrink, LF Solder. PE3W09244LF/HS is a 4.3-10 male to 4.3-10 male cable using SPP-250-LLPL coax. This Pasternack 4.3-10 male to 4.3-10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 4.3-10 to male 4.3-10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W09244LF/HS 4.3-10 male to 4.3-10 male cable assembly is constructed with SPP-250-LLPL coax. | 0 | |||
| PE3W03244LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-36 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-36 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Cable Using LMR-240 Coax, LF Solder. PE3C0244LF is a reverse polarity TNC male to reverse polarity TNC female cable using LMR-240 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0244LF TNC reverse polarity male to TNC reverse polarity female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03244LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 12 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 12 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 12 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-12 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-12 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03244LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-24 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-24 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03244LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male Right Angle Low Loss Cable Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C3244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using PE-P300LL Coax, LF Solder. PE3C3244LF is a TNC male to N female cable using PE-P300LL coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3244LF TNC male to N female cable assembly is constructed with PE-P300LL coax. | 0 | |||
| PE3W03244LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-60 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-60 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Sager | ESW-102-44-L-S | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 91 | |
| ESQ-112-44-L-D | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 76 | ||
| ESQ-122-44-L-D-LL | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 38 | ||
| ESW-132-44-L-D | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 38 | ||
| ESQ-112-44-L-S-LL | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 34 | ||
| ESQ-132-44-L-D-LL | Samtec Inc | ELEVATED SOCKET STRIP RoHS : Compliant |
| 20 | ||
| ARC6-08-24.4-LU-LD-2R-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| ESQ-122-44-L-S | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESQ-132-44-L-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESW-132-44-L-S-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ARC6-08-24.4-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| POM-2244L-C33-R | PUI Audio | Microphones CONDENSER 2.2 X 6mm |
| 0 | ||
| DW-05-13-L-D-244-LL | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ESQ-112-44-L-D-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESQ-112-44-L-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
![]() Teledyne HiRel | 54F244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS | 0 | ||
![]() Vyrian | A1244LLHLX-I1-T | Allegro MicroSystems | Hall Effect Sensor, -8mT Min, 8mT Max, BICMOS, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount | 16,032 | ||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 11,229 | |||
| CY8C6244LQI-S4D82 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 10,324 | |||
| A1244LLHLT-I2-T | Allegro MicroSystems | Hall Effect Sensor | 9,676 | |||
54F2244LM![]() | Texas Instruments | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 | 9,253 | |||
| 54F2244LMQB | National Semiconductor Corporation | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant | 8,887 | |||
| CY8C6244LQQ-S4D92 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 7,672 | |||
| ESW-102-44-L-D | Samtec Inc | Board Connector, 4 Contact(s), Female, Solder Terminal, Socket RoHS : Compliant | 7,647 | |||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 7,493 | |||
| ZL30244LFG7 | Microchip Technology Inc | Phase Locked Loop RoHS : Compliant | 6,459 | |||
74ALVTH162244LRG4![]() | Texas Instruments | Bus Driver, ALVT Series, 4-Func, 4-Bit, True Output, BICMOS, PDSO48 RoHS : Compliant | 5,659 | |||
54FCT244LMQB![]() | Texas Instruments | Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, CQCC20 | 3,646 | |||
54F244LMQB![]() | Texas Instruments | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 | 3,304 | |||
| 54ACT244LM | National Semiconductor Corporation | Bus Driver, ACT Series, 2-Func, 4-Bit, True Output, CMOS, CQCC20 | 2,206 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |