280ACNRWNTZCWC Price, 销售商, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2807/HS-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2807/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2807/HS-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $109.99
10 : $107.79
25 : $105.59
100 : $103.39

363

PE3C2807-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-200-UF Coax with Times Microwave Components., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C2807-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2807-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

363

PE3C2807/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-200-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2807/HS-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2807/HS-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2807/HS-60 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $119.99
10 : $117.59
25 : $115.19
100 : $112.79

226

PE3C10280-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum BNC Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 36 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 36 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-36 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-36 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-36 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $67.49
10 : $66.14
25 : $64.79
100 : $63.44

PE3C10280-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-48 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-48 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $74.89
10 : $73.39
25 : $71.89
100 : $70.4

PE3W02803/SP-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 120 Inch Length Using LMR-400-UF Coax with 180 Deg. Clock., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 120 inch length using LMR-400-UF coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 120 inch length using LMR-400-UF coax with 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02803/SP-120 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W02803/SP-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 120 inch length using LMR-400-UF coax with 180 deg. clock.

1 : $192.99
25 : $183.34
50 : $173.69
100 : $165.97

PE3W12808-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Female Bulkhead to Push-On SMP Female Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMA female bulkhead to push-on SMP female right angle low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA female bulkhead to push-on SMP female right angle low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our low loss SSMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12808-24 can also be known as a low loss SSMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12808-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SSMA jack to SMP jack cable assembly PE3W12808-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12808-24 can also be used in the other direction and will be a right angle SMP female to SSMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SSMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMP cable assembly for quick shipment worldwide. Variations of SSMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE37280/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Female to HN Female Cable Using RG214 Coax with HeatShrink., Pasternack’s PE37280/BK/HS HN female to HN female RF cable assembly using RG214 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN female to HN female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a HN cable connection on one end and a HN cable connection on the other. Our HN to HN cable assembly has a female gender on end 1 and a female on end 2. PE37280/BK/HS can also be known as a HN jack to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE37280/BK/HS RF cable has a pvc jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has an in-series connection. Our HN female to HN female cable has a maximum VSWR of 1.4:1. This PE37280/BK/HS HN jack to HN jack cable assembly is built with RG214, which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This HN jack to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal HN to HN RF cable assembly as per your requirements.

PE3C6280

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. C Male to TNC Male Cable Using RG142 Coax., Radio frequency assembly C male to TNC male cable using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. C male to TNC male cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with C type cable connection on one end and TNC cable connection on the other. Our type C to TNC cable assemblies have a male gender on end 1 and male on end 2. This type C to TNC cable is a male to male coax assembly, PE3C6280, can also be known as a C type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type C plug to TNC plug cable assembly PE3C6280 is built with RG142 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type C male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6280 can also be used in the other direction and will be TNC male to C type male cable assembly if the opposite connectivity is required. Type C plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to TNC cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this C male to TNC male cable using RG142 coax.

PE3W02800

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50. SMA Male to TNC Male Right Angle Cable Using LMR-400 Coax. PE3W02800 is a SMA male to TNC male right angle cable using LMR-400 coax. This Pasternack SMA male to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02800 SMA male to TNC male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22808

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Cable Using RG188 Coax. PE3W22808 is a BNC male right angle to BNC female cable using RG188 coax. This Pasternack BNC male right angle to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22808 BNC male right angle to BNC female cable assembly is constructed with RG188 coax.

PE3W22807

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Cable Using LMR-240-DB Coax. PE3W22807 is a BNC male right angle to BNC female cable using LMR-240-DB coax. This Pasternack BNC male right angle to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22807 BNC male right angle to BNC female cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02802

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Right Angle Cable Using LMR-240-UF Coax. PE3W02802 is a SMA male right angle to TNC male right angle cable using LMR-240-UF coax. This Pasternack SMA male right angle to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02802 SMA male right angle to TNC male right angle cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12808-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SSMA Female Bulkhead to Push-On SMP Female Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SSMA female bulkhead to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA female bulkhead to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our low loss SSMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12808-200CM can also be known as a low loss SSMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12808-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SSMA jack to SMP jack cable assembly PE3W12808-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12808-200CM can also be used in the other direction and will be a right angle SMP female to SSMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SSMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMP cable assembly for quick shipment worldwide. Variations of SSMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C8280-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 36 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to male coax assembly, PE3C8280-36, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly PE3C8280-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8280-36 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

TE Connectivity

42801-1

TE Connectivity

187 FASTON REC 20-16 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42801-1 | Internal Number: 42801-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.06
100 : $0.08
10 : $0.09
1 : $0.12

52,705

280000-6

TE Connectivity

250 FASTON,REC.,24-17 AWG,TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 280000-6 | Internal Number: 280000-6 | TE Connectivity
RoHS : Compliant

1,000 : $0.09
100 : $0.12
10 : $0.15
1 : $0.2

29,743

42800-2

TE Connectivity

187 FASTON REC 20-16 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42800-2 | Internal Number: 42800-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.12
100 : $0.16
10 : $0.19
1 : $0.25

10,372

280615-2

TE Connectivity

MOD I INCREMENTAL ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Right Angle Board-to-Board 2 | PCB Header & Receptacle | Part Number: 280615-2 | Internal Number: 280615-2 | TE Connectivity
RoHS : Compliant

2,500 : $1.83
1,000 : $1.88
500 : $1.93
250 : $1.98
100 : $2.03
50 : $2.07
25 : $2.12
10 : $2.17
1 : $2.22

3,609

280617-1

TE Connectivity

06P MOD 1 P.S.ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Right Angle Board-to-Board 6 | PCB Header & Receptacle | Part Number: 280617-1 | Internal Number: 280617-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.89
1,000 : $1.94
500 : $1.99
250 : $2.04
100 : $2.09
50 : $2.14
25 : $2.19
10 : $2.24
1 : $2.3

2,699

280618-1

TE Connectivity

08P MOD 1 ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Right Angle Board-to-Board 8 | PCB Header & Receptacle | Part Number: 280618-1 | Internal Number: 280618-1 | TE Connectivity
RoHS : Compliant

2,500 : $2.98
1,000 : $3.06
500 : $3.14
250 : $3.22
100 : $3.3
50 : $3.38
25 : $3.46
10 : $3.54
1 : $3.62

2,367

280374-1

TE Connectivity

10P AMPMODU II SHRD HDR, ST, TIN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 10 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280374-1 | Internal Number: 280374-1 | TE Connectivity
RoHS : Compliant

1,000 : $2.11
500 : $2.17
250 : $2.23
100 : $2.3
50 : $2.36
25 : $2.43
10 : $2.49
1 : $2.55

1,746

2404280-6

TE Connectivity

EP 2.5 HDR, GLOW WIRE, 6P PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 2404280-6 | Internal Number: 2404280-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.36
1,000 : $0.42
500 : $0.48
250 : $0.5
100 : $0.57
50 : $0.62
25 : $0.67
10 : $0.75
1 : $0.82

1,556

280508-2

TE Connectivity

9P AMPMODU II SHRD HDR, ST, 0.38AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 9 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280508-2 | Internal Number: 280508-2 | TE Connectivity
RoHS : Compliant

1,000 : $2.71
500 : $2.8
250 : $2.88
100 : $2.96
50 : $3.04
25 : $3.13
10 : $3.21
1 : $3.29

926

280372-2

TE Connectivity

6P AMPMODU II SHRD HDR, ST, 0.38AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 6 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280372-2 | Internal Number: 280372-2 | TE Connectivity
RoHS : Compliant

2,500 : $1.34
1,000 : $1.38
500 : $1.41
250 : $1.45
100 : $1.49
50 : $1.52
25 : $1.56
10 : $1.6
1 : $1.63

512

280232-8

TE Connectivity

250 FASTON POST INS.,REC.,1 POS,NATRUAL Insulation Boot & Sleeve Product Type: Insulation Sleeve Terminal Orientation: Straight Compatible Insulation Diameter (Max): 4.4 mm Compatible Insulation Diameter (Max): .173 in Compatible Insulation Diameter Range: .173 in Insulation Sleeve Straight 4.4 mm .173" | Insulation Boots & Sleeve | Part Number: 280232-8 | Internal Number: 280232-8 | TE Connectivity
RoHS : Compliant

1,000 : $0.07
100 : $0.09
25 : $0.13
10 : $0.15
1 : $0.17

494

RP73PF2A280RBTDF

TE Connectivity

RP 2A 0.25W 280R 0.1% 25PPM 1K RL Resistance Value: 280 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 280 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A280RBTDF | Internal Number: 6-2176091-6 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

372

280509-2

TE Connectivity

2X09 POS .100DR MODU- PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 18 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280509-2 | Internal Number: 280509-2 | TE Connectivity
RoHS : Compliant

1,000 : $3.53
500 : $3.64
250 : $3.74
100 : $3.85
50 : $3.96
25 : $4.06
10 : $4.17
1 : $4.28

280

T4052228003-002

TE Connectivity

RPC-M8-3MR-1.0-M12-3FR-PUR Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1 m 3.2 ft | M8 Male R/a To M12 Female R/a Cable Assembly | Part Number: T4052228003-002 | Internal Number: T4052228003-002 | TE Connectivity
RoHS : Compliant

100 : $23.87
50 : $25.01
25 : $26.13
10 : $27.27
1 : $28.41

FN3280H-80-35-R69

TE Connectivity

FN3280H-80-35-R69 Current Rating: 80 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: WYE (4 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters & High-End Line Filter For Industrial Machinery And Equipment | 80 A Terminal Block WYE (4 wire + ground) | Part Number: FN3280H-80-35-R69 | Internal Number: 822029-SF | FN3280H-80-35-R69 Current Rating: 80 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: WYE (4 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters & High-End Line Filter For Industrial Machinery And Equipment | 80 A Terminal Block WYE (4 wire + ground) | Part# FN3280H-80-35-R69
RoHS : Compliant

1 : $2,111.63

Teledyne HiRel

5962-9152802MYA

Teledyne HiRel

OR/NOR GATE, QUINT 2-INPUT
RoHS : Not Compliant

5962-8762801SA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

5962-9152802MXA

Teledyne HiRel

OR/NOR GATE, QUINT 2-INPUT
RoHS : Not Compliant

5962-9152801MYA

Teledyne HiRel

OR/NOR GATE, TRIPLE 5-INPUT
RoHS : Not Compliant

5962-8762801RA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

54F280FMQB

Teledyne HiRel

PARITY GENERATOR/CHECKER, 9-BIT

5962-8762802SA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

5962-9452801QXA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 16-BIT, TS
RoHS : Not Compliant

5962-8762802RA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

54F280LMQB

Teledyne HiRel

PARITY GENERATOR/CHECKER, 9-BIT

54F280DMQB

Teledyne HiRel

PARITY GENERATOR/CHECKER, 9-BIT

5962-87628022A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

5962-9152801MXA

Teledyne HiRel

OR/NOR GATE, TRIPLE 5-INPUT
RoHS : Not Compliant

5962-87628012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS
RoHS : Not Compliant

Venkel Ltd.

PWCR0402-AK-2802DT

VENKEL LTD

Pulse Withstanding CR;0402;1/5W;�100PPM;28K;�0.5%
RoHS : Compliant

PWCR0805-TK-2800FT

VENKEL LTD

Pulse Withstanding CR;0805;1/4W;�100PPM;280R;�1%
RoHS : Compliant

PWCR1206-VK-2802FT

VENKEL LTD

Pulse Withstanding CR;1206;1/2W;�100PPM;28K;�1%
RoHS : Compliant

AGCR0402-RK-2803DT

VENKEL LTD

Auto Grade Resistor;0402;1/8W;�100PPM;280K;�0.5%
RoHS : Compliant

AGCR0603-QL-2804FT

VENKEL LTD

Auto Grade Resistor;0603;1/10W;�200PPM;2.8M;�1%
RoHS : Compliant

HPCR0603-T-2802FT

VENKEL LTD

High Power CR;0603;1/4W;28K;�1%
RoHS : Compliant

HPTF0603-QE-2802UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�25PPM;28K;�0.01%
RoHS : Compliant

HPTF0603-SE-2802AT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;28K;�0.05%
RoHS : Compliant

HPTF0805-RN-2803BT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�10PPM;280K ;�0.1%
RoHS : Compliant

HPTF0805-TC-2803CT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;280K ;�0.25%
RoHS : Compliant

HPTF0805-TE-2801CT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�25PPM;2.8K;�0.25%
RoHS : Compliant

HPTF1206-TP-2800CT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;280R;�0.25%
RoHS : Compliant

HPTF1210-UN-2801FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;2.8K;�1%
RoHS : Compliant

HPTF2010-UN-2802FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;28K;�1%
RoHS : Compliant

HPTF2010-UP-2800FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�5PPM;280R;�1%
RoHS : Compliant

Vyrian

51700-10402804AALF

Amphenol Communications Solutions

Board Connector, 36 Contact(s), 4 Row(s), Male, Straight, Solder Terminal

9,490

AD5280BRUZ50

Analog Devices Inc

Digital Potentiometer, 1 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO14
RoHS : Compliant

8,770

650128-000

TE Connectivity

Wire Terminal, 2.94mm2
RoHS : Compliant

8,767

LM3280TLX-280/NOPB

Texas Instruments

Switching Regulator, Current-mode, 0.94A, 2000kHz Switching Freq-Max, PBGA16
RoHS : Compliant

8,161

ADUM2280BRIZ-RL

Analog Devices Inc

CMOS, PDSO16
RoHS : Compliant

7,865

LM3280TLX-280

Texas Instruments

Switching Regulator, Current-mode, 0.94A, 2200kHz Switching Freq-Max, PBGA16
RoHS : Compliant

7,787

LM3280TL-280

Texas Instruments

Switching Regulator, Current-mode, 0.94A, 2200kHz Switching Freq-Max, PBGA16
RoHS : Compliant

5,626

74AC11280DR

Texas Instruments

Parity Generator/Checker, AC Series, 9-Bit, Complementary Output, CMOS, PDSO14
RoHS : Not Compliant

5,031

1SG280HN1F43E1VG

Intel Corporation

Field Programmable Gate Array, 2753000-Cell, PBGA1760
RoHS : Compliant

2,264

PIC16LF628-04I/SO

Microchip Technology Inc

RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 4MHz, CMOS, PDSO18
RoHS : Compliant

2,152

R928050000

Radiall

Interconnection Device
RoHS : Compliant

892

843-191-2801-116

Amphenol Corporation

Wire And Cable, 16 Conductor(s), 28AWG, 300V, Planar Cable
RoHS : Compliant

884

IDT72801L25PF

Integrated Device Technology Inc

FIFO, 256X9, 15ns, Synchronous, CMOS, PQFP64
RoHS : Not Compliant

389

787-2801

WAGO Innovative Connections

Power Supply Module
RoHS : Compliant

369

MAX280EWE-T

Maxim Integrated Products

Switched Capacitor Filter, 1 Func, Butterworth, Lowpass, CMOS, PDSO16
RoHS : Not Compliant

347

Waytek, Inc.

19128-0023

Molex

16-14 GA #8 Spade Terminal Non-Insulated

100 : $0.1067
200 : $0.0979
500 : $0.0908
1,000 : $0.0868
5,000 : $0.0839

18,768

19128-0021

Molex

16-14 GA #6 Spade Terminal Non-Insulated

100 : $0.1082
200 : $0.0984
500 : $0.0879
1,000 : $0.0795
5,000 : $0.0759

16,622

T120S0K2 111-12803

HellermannTyton

HellermannTyton T120S0K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 9" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications.

50 : $0.2406
200 : $0.2287
500 : $0.2127
1,000 : $0.2037

15,600

19128-0055

Molex

16-14 GA #10 Spade Terminal Non-Insulated

100 : $0.1006
200 : $0.0913
500 : $0.0816
1,000 : $0.0738
5,000 : $0.0704

7,209

10762803

Aptiv PLC

Apex 2.8 16-14GA Female Term
RoHS : Compliant

50 : $0.2293
200 : $0.2106
500 : $0.1899
1,000 : $0.1777

3,970

280756-4

TE Connectivity

The TE Connectivity 280756-4 is a FASTIN-FASTON 375 series female quick disconnect terminal designed for reliable relay and harness connections. It accepts 1210 Ga. wire and mates with 0.375" (9.5 mm) tabs, providing secure electrical contact in high-current applications. Constructed from tin-plated phosphor bronze with an open-barrel F-crimp design, it ensures strong mechanical retention and excellent conductivity for automotive and industrial use.
RoHS : Compliant

10 : $0.7073
50 : $0.6807
100 : $0.6587
200 : $0.6233
500 : $0.6012
1,000 : $0.5835

3,072

12162280

Aptiv PLC

Aptiv 12162280 Metri-Pack 150.2 Series sealed connector is a 3-way female connector rated to 14A max. It is suited for space-limited in-line connections and low-energy electronic circuits, with a pull-to-seat design for high-demand sealed applications.
RoHS : Compliant

5 : $2.1018
50 : $1.7778
100 : $1.683
200 : $1.5802
500 : $1.517

2,293

57280 OR 611-028

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #28 Band 1/2" 1-1/4" TO 2-1/4"

10 : $1.5879
50 : $1.4114
100 : $1.2807
200 : $1.2416
500 : $1.1958
1,000 : $1.15

782

7100164280

22-18 GA #6 Ring Terminal Heat Shrink Sealed

25 : $0.8556
50 : $0.7618
100 : $0.6915
200 : $0.668
500 : $0.6446
1,000 : $0.6212

664

0828-030-Z-X-ISO-P

Littelfuse Inc

828 Series HV Bolt Down Fuse, 1000VDC, 30A disc way, no repl

1 : $7.68
10 : $7.59
50 : $7.46
100 : $7.24
200 : $7.16
500 : $7.04

300

0828-025-Z-X-ISO-P

Littelfuse Inc

828 Series HV Bolt Down Fuse, 1000VDC, 25A disc way, no repl

1 : $7.68
10 : $7.59
50 : $7.46
100 : $7.24
200 : $7.16
500 : $7.04

298

0828-015-Z-X-ISO-P

Littelfuse Inc

828 Series HV Bolt Down Fuse, 1000VDC, 15A disc way, no repl

1 : $9.75
10 : $9.46
50 : $9.05
100 : $8.45
200 : $8.23
500 : $7.92

292

0828-020-Z-X-ISO-P

Littelfuse Inc

828 Series HV Bolt Down Fuse, 1000VDC, 20A disc way, no repl

1 : $9.75
10 : $9.46
50 : $9.05
100 : $8.45
200 : $8.23
500 : $7.92

252

75228-03

Littelfuse Inc

Littelfuse 75228-03 electric two-speed wiper switch controls one motor with dynamic parking at 12VDC. It features 3 positions, Off/Park-Low-High with push-to-wash, a zinc die-cast housing, six blade terminals, and an O-ring-sealed stem.

1 : $43.12
5 : $38.5
10 : $35.93
50 : $33.87
100 : $32.34
200 : $30.8

Win Source Electronics

KPS28010CTLD

Cosmo Electronics

50mA 100mV@10mA,2mA 80V 6V 1.1V DC SOP-4-1.27mm Transistor, Photovoltaic Output Optoisolators RoHS
RoHS : Compliant

4,630 : $0.0648
3,460 : $0.0723
2,675 : $0.0748
1,945 : $0.0773
1,255 : $0.0798
515 : $0.0972

352,000

IPA60R280P7S

Infineon Technologies AG

600V CoolMOSª P7 Power Transistor
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

56,590

F280049PZQR

Texas Instruments

IC MCU 32BIT 256KB FLASH 100LQFP / C28x Automotive, AEC-Q100, C2000™ C28x Piccolo™ Microcontroller IC 32-Bit Single-Core 100MHz 256KB (256K x 8) FLASH 100-LQFP (14x14)
RoHS : Compliant

58 : $5.2182
47 : $5.4304
36 : $5.6425
25 : $6.0667
16 : $6.2788
8 : $6.7031

29,390

IPA60R280P6

Infineon Technologies AG

600V, N-CHANNEL POWER MOSFET
RoHS : Compliant

555 : $0.5447
415 : $0.6075
320 : $0.6284
235 : $0.6494
150 : $0.6703
65 : $0.817

25,500

IRF2804SPBF

Infineon Technologies AG

MOSFET N-CH 40V 75A D2PAK
RoHS : Compliant

230 : $1.3046
185 : $1.3576
142 : $1.4107
99 : $1.5167
64 : $1.5697
30 : $1.6758

11,600

F280041PMS

Texas Instruments

IC MCU 32BIT 128KB FLASH 64LQFP / C28x series Microcontroller IC 32-Bit Single-Core 100MHz 128KB (128K x 8) FLASH 64-LQFP (10x10)
RoHS : Compliant

137 : $2.4674
110 : $2.5677
84 : $2.668
59 : $2.8685
38 : $2.9689
18 : $3.1695

9,000

ABMM2-8.000MHZ-E2-T

Abracon Corporation

CRYSTAL 8.0000MHZ 18PF SMD
RoHS : Compliant

535 : $0.5654
400 : $0.6306
310 : $0.6524
225 : $0.6741
145 : $0.6959
60 : $0.8481

8,000

SRR1280-100M

Bourns Inc

FIXED IND 10UH 6A 19.5 MOHM SMD
RoHS : Compliant

510 : $0.591
380 : $0.6591
295 : $0.6819
215 : $0.7046
140 : $0.7273
60 : $0.8864

8,000

IRF2807ZPBF

Infineon Technologies AG

MOSFET N-CH 75V 75A TO-220AB
RoHS : Compliant

255 : $1.1819
190 : $1.3182
150 : $1.3637
110 : $1.4091
70 : $1.4546
30 : $1.7728

7,670

AUIRF2804L

Infineon Technologies AG

MOSFET N-CH 40V 195A TO262
RoHS : Compliant

51 : $5.9015
38 : $6.5825
30 : $6.8095
22 : $7.0364
14 : $7.2634
6 : $8.8523

5,000

NH82801DBSL8DE

Intel Corporation

RoHS : Compliant

28 : $14.2115
21 : $15.8511
16 : $16.3977
12 : $16.9444
8 : $17.4909
4 : $21.3172

3,600

F280023PMQR

Texas Instruments

IC MCU 32BIT 64KB FLASH 64LQFP / C28x series Microcontroller IC 32-Bit Single-Core 100MHz 64KB (32K x 16) FLASH 64-LQFP (10x10)
RoHS : Compliant

75 : $4.006
56 : $4.4683
44 : $4.6223
32 : $4.7764
21 : $4.9305
9 : $6.009

3,500

IS42S32800J-7TL-TR

Integrated Silicon Solution Inc

IC DRAM 256MBIT PAR 86TSOP II

16 : $19.5489
12 : $21.8046
9 : $22.5564
7 : $23.3083
5 : $24.0602
2 : $29.3234

1,880

IS43DR81280C-25DBLI-TR

Integrated Silicon Solution Inc

IC DRAM 1G PARALLEL 60TWBGA

55 : $6.1935
41 : $6.9082
32 : $7.1463
23 : $7.3845
15 : $7.6227
7 : $9.2902

243

PS2805C-4-A

Celem Power Capacitors

OPTOISO 2.5KV 4CH TRANS 16SOIC

37 : $8.1369
28 : $9.0757
22 : $9.3887
16 : $9.7016
10 : $10.0146
5 : $12.2053

190

Wuhan P&S

NCP115AMX280TCG

onsemi

-
RoHS : Compliant

1 : $0.1649
100 : $0.1053
500 : $0.0868
1,000 : $0.0798

5,000

10145028-030LF

Amphenol FCi

Wire-to-board connector, socket, 30 positions, left and right double row

1 : $5.58
100 : $2.24
500 : $2.07
1,000 : $2.01

5,000

HMHA2801R2

onsemi

Phototransistor Optocouplers
RoHS : Compliant

1 : $0.41
100 : $0.26
500 : $0.22
1,000 : $0.2

2,500

280ACNRWNTZCWC 销售商

链接网址