| 数据搜索系统,热门电子元器件搜索 |
|
4923GETTR-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() TME | 214923-1114 | Molex | Male; Inom: 1A; 125V; PIN: 1; Imax: 1A; tinned; crimped |
| 1,500 | |
| 829492-3 | TE Connectivity | Connector: pin strips; pin header; male; data; PIN: 9; THT; Inom: 5A RoHS : Compliant |
| 1,000 | ||
| 1374923 | Bossard Group | Screw; for plastic; 4.8x13; Head: cheese head; slotted; 1.2mm; zinc |
| 400 | ||
| 2684-923131 | TE Connectivity | Connector: DIN 41612; data |
| 384 | ||
| 2492370000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; WMF; 18.5A,24A; 500V; screw-in; screw; wemid RoHS : Compliant |
| 200 | ||
| 1-146492-3 | TE Connectivity | Connector: pin strips; data; PIN: 26; soldering,THT; Inom: 3A RoHS : Not Compliant |
| 106 | ||
| 214923-1111 | Molex | Male; Inom: 1A; 125V; PIN: 1; Imax: 1A; tinned; crimped |
| 100 | ||
| 12 49 23 | KNIPEX | Length limiter |
| 18 | ||
| 94923 | Goobay | Patch cord; U/FTP; Cat 6; RJ45 plug,both sides; 20m; stranded; Cu |
| 5 | ||
| 1784923 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON XL RoHS : Compliant |
| 0 | ||
| 032U4923 | Danfoss A/S | Electromagnetic valve; brass; FKM; EV310B; Valve: 3/2 NC; 0÷16bar |
| 0 | ||
| 97 49 23 | KNIPEX | Crimping jaws |
| 0 | ||
| 00114923 | GSR | Tap: metric; M20; fine thread,right hand thread; 0.75; L: 80mm |
| 0 | ||
| 1492320000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; insulated; M6; Ø: 6.5mm; blue; crimped; 1.5÷2.5mm2 RoHS : Compliant |
| 0 | ||
| 2649230000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; CH; 15A; 630V |
| 0 | ||
![]() Avnet Americas | 1-1469492-3 | TE Connectivity | - Trays (Alt: 1-1469492-3) RoHS : Compliant |
| 145 | |
| TSW-149-23-T-S | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 1 Rows, 49 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-149-23-T-S) RoHS : Compliant |
| 0 | ||
| 1-174923-1 | TE Connectivity | - Bag (Alt: 1-174923-1) RoHS : Compliant |
| 0 | ||
| BMR4923302/805 | Flex Ltd | - Trays (Alt: BMR4923302/805) RoHS : Compliant | 0 | |||
ABM12W-24.9231MHZ-7-K2Z-T3![]() | Abracon Corporation | - Tape and Reel (Alt: ABM12W-24.9231MHZ-7-K2Z-T3) RoHS : Compliant | 0 | |||
| CDLL4923/TR | Microchip Technology Inc | Diode Zener Single 19.2V 1% 4mW 2-Pin MELF DO-213AA T/R - Tape and Reel (Alt: CDLL4923/TR) RoHS : Not Compliant |
| 0 | ||
| 249-2302-201 | ITT Interconnect Solutions | KJA0-W FIN-SIZE 13-B POS - Bulk (Alt: 249-2302-201) RoHS : Not Compliant |
| 0 | ||
| 1744492-3 | TE Connectivity | EP II HOUSING 03P, RED - Bag (Alt: 1744492-3) RoHS : Not Compliant |
| 0 | ||
| M85049/23-31N | Amphenol Corporation | - Bulk (Alt: A850492331N) RoHS : Not Compliant |
| 0 | ||
| M85049/23-50W | Amphenol Corporation | - Bulk (Alt: A850492350W) RoHS : Not Compliant |
| 0 | ||
| M85049/23-66Z | Amphenol Corporation | 90 NON-ENVIRONMENTAL EMI/RFI SPIN COUPLING FOR 26482 SERIES II; 5015 SERIES III; 83723 SERIES III - Bulk (Alt: A850492366Z) RoHS : Not Compliant |
| 0 | ||
| M85049/23-68N | Amphenol Corporation | - Bulk (Alt: A850492368N) RoHS : Not Compliant |
| 0 | ||
| M85049/23-8Z | Amphenol Corporation | 90 NON-ENVIRONMENTAL EMI/RFI SPIN COUPLING FOR 26482 SERIES II; 5015 SERIES III; 83723 SERIES III - Bulk (Alt: A85049238Z) RoHS : Not Compliant |
| 0 | ||
| M850492328X | Amphenol Corporation | M85049/23-28X - Bulk (Alt: A850492328X) RoHS : Not Compliant | 0 | |||
| M850492373X | Amphenol Corporation | M85049/23-73X - Bulk (Alt: A850492373X) RoHS : Not Compliant | 0 | |||
![]() Newark | 1-174923-1 | TE Connectivity | Plug Housing, 6Pos, Pbt, Natural; |Te Connectivity Amp 1-174923-1 RoHS : Compliant |
| 1,508 | |
| 214923-1112 | Molex | Cable Assy, Picoblade Pin-Free End, 5.9"; |Molex 214923-1112 RoHS : Compliant |
| 1,445 | ||
| 214923-1114 | Molex | Cable, Picoblade Pin-Free End, 11.8"; |Molex 214923-1114 RoHS : Compliant |
| 950 | ||
| TSW-149-23-T-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 49Way; |Samtec, Inc. TSW-149-23-T-S RoHS : Compliant |
| 243 | ||
| 174923-2 | TE Connectivity | Automotive Housing, Plug, 6Pos, Black; |Te Connectivity Amp 174923-2 RoHS : Compliant |
| 190 | ||
| 214923-1213 | Molex | Cable, Picoblade Pin-Free End, 8.85"; Connector To Connector:Picoblade Crimp Terminal Pin To Free End; Cable Length - Imperial:8.85"; Cable Length - Metric:225Mm; Product Range:Picoblade Ots 214923 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 100 | ||
| 214923-1112 | Molex | Cable Assy, Picoblade Pin-Free End, 5.9"; Connector To Connector:Picoblade Crimp Terminal Pin To Free End; Cable Length - Imperial:5.9"; Cable Length - Metric:150Mm; Product Range:Picoblade Ots 214923 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 60 | ||
| 214923-1114 | Molex | Cable, Picoblade Pin-Free End, 11.8"; Connector To Connector:Picoblade Crimp Terminal Pin To Free End; Cable Length - Imperial:11.8"; Cable Length - Metric:300Mm; Product Range:Picoblade Ots 214923 Series; Jacket Color:Black Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| 34923A | Keysight Technologies | Multiplexer, Mainframe; |Keysight Technologies, Inc. 34923A RoHS : Compliant |
| 16 | ||
| THT-190-492-3 | Brady Worldwide Inc | Adhesive Cable Management Accessories; |Brady THT-190-492-3 RoHS : Not Compliant |
| 15 | ||
| 4923 | Adafruit Industries | 1.25Mm Pitch 3-Pin Cable 20Cm Long 1:1 Cable - Molex Picoblade Compatible |Adafruit 4923 RoHS : Not Compliant |
| 10 | ||
| CSP4923LG1 | Hammond Manufacturing | Panel, Side, Solid, Steel, Grey; |Hammond CSP4923LG1 RoHS : Compliant |
| 7 | ||
| THT-144-492-3 | Brady Worldwide Inc | Adhesive Cable Management Accessories; |Brady THT-144-492-3 RoHS : Not Compliant |
| 5 | ||
| 214923-1111 | Molex | Cable, Picoblade Pin-Free End, 2.95"; |Molex 214923-1111 RoHS : Compliant |
| 4 | ||
| 214923-1213 | Molex | Cable, Picoblade Pin-Free End, 8.85"; |Molex 214923-1213 RoHS : Compliant |
| 2 | ||
![]() RS | 49.7049-23 | Stäubli Electrical Connectors | SAFETY SOCKET, 4 MM, BLUE RoHS : Compliant |
| 46 | |
| 1849236 | RS Pro | ALUMINUM OXIDE CUTTING DISC, 4.92 INCH(125MM) DIAMETER 30 GRIT, 3MM THICK |
| 25 | ||
| 1694923 (SAC-4P-M12MS/0 3-PUR/M 8FS) | Phoenix Contact | CABLE ASSEMBLY;SENSOR/ACTUATOR;4-POSITION;0.3M;PUR |
| 22 | ||
| 492308 | RS Pro | NYLON CABLE MARKER PLATE 44.5X19.1MM |
| 15 | ||
| 5952 3/4 IN X 15 YD (7000049237) | 3M | VHB HEAVY DUTY MOUNTING TAPE 5952, BLACK, 3/4 IN X 15 YD, 45 MIL |
| 5 | ||
| 9834923 | WIKA Instrument LP | 9834923 ANALOG POSITIVE PRESS GAUGE BOTTOM ENTRY 3000PSI, CONNECTION SIZE NPT 1/2 |
| 3 | ||
| 1049232 (RIF-1-RPT-LV-24AC/2X21MS) | Phoenix Contact | PRE-ASSEMBLED RELAY MODULE WITH PUSH-IN CONNECTION |
| 3 | ||
| 174923-1 | TE Connectivity | MULTILOCK 070 SERIES 3.5MM PITCH 6 WAY 1 ROW MALE STRAIGHT PCB HOUSING RoHS : Compliant |
| 2 | ||
| 1-1469492-3 | TE Connectivity | MULTIGIG RT 9MM GUIDE/ESD 90 DEG RoHS : Compliant |
| 2 | ||
| 63949232 | Southwire Company LLC | NONMETALLIC-SHEATHED ROMEX CABLE, 8-3 NM W/G, BLACK |
| 1 | ||
| THT-182-492-3 | Brady Worldwide Inc | THERMAL TRANSFER POLYESTER LABEL 0.44"H X 1"W ROLL OF 3000 LABELS |
| 1 | ||
| QMT42VP6FF1000Q (49234) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 1M, 10-30VDC, PNP, QD, QMT42 |
| 1 | ||
| QMT42VP6FF2000Q (49238) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 2M, 10-30VDC, PNP, QD, QMT42 |
| 1 | ||
| 4923 | CR Seals | SINGLE LIP GREASE SEAL, I.D. 0.5 IN, O.D. 0.843 IN, THICKNESS 0.25 IN |
| 0 | ||
| 4923 | Adafruit Industries | 1.25MM PITCH 3-PIN CABLE 20CM LONG 1:1 CABLE |
| 0 | ||
![]() Microchip Technology Inc | GC4492-30 | Microchip Technology Inc | Si PIN Hermetic Pill, Projected EOL: 2046-08-15 RoHS : Compliant |
| 17 | |
| 1N4923 | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N4923A | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4923 | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| 1N4923/TR | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4923A | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| 1N4923A/TR | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4923/TR | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| CDLL4923A/TR | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
![]() Bisco Industries | 5804-92-3-P | Seastrom Mfg | 4,357 | |||
| MS35649-2385B | Richard Manno & Co | 1,157 | ||||
| MS35649-2314 | Ankit Fasteners | 570 | ||||
| MS35649-2382 | American Nut Manufacturing | 357 | ||||
| D1-004-923-010 | Southco | 90 | ||||
| MS9492-31 | Lee Aerospace | 80 | ||||
| MS9349-23 | UMPCO Inc | 34 | ||||
| MS35649-2385 | MS Nuts | 31 | ||||
| MS35649-2382 | MS Nuts | 30 | ||||
| MS35492-30 | Pilgrim Screw Corporation | 29 | ||||
| MS35649-2384 | MRL Manufacturing Corp | 8 | ||||
| MS35649-2384 | MS Nuts | 5 | ||||
| MS35649-2314 | MS Nuts | 4 | ||||
| MS35649-2314 | MRL Manufacturing Corp | 3 | ||||
| 60849-230 | nVent Schroff | 2 | ||||
![]() Rochester Electronics | 2N4923G![]() | onsemi | Trans BJTs Single 80V 1A TO-225-3 Box RoHS : Compliant |
| 2,005 | |
| LV4923VH-MPB-H | onsemi | Audio Amplifier 36-SOP RoHS : Compliant |
| 829 | ||
| LV4923VH-TLM-H | onsemi | Audio Amplifier 36-SOP RoHS : Compliant |
| 50,000 | ||
| TLE4923HALA1 | Infineon Technologies AG | Hall Effect Sensor, 2mT Min, 2mT Max, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant |
| 8,000 | ||
LM4923LQ/NOPB![]() | Texas Instruments | Audio Amplifier Class AB 1-Channel (Mono) 1.1W 8-QFN T/R RoHS : Compliant |
| 29,995 | ||
| LM4923LQ/NOPB | National Semiconductor Corporation | Audio Amplifier Class AB 1-Channel (Mono) 1.1W 8-QFN T/R RoHS : Compliant |
| 2,000 | ||
| LM4923LQX/NOPB | National Semiconductor Corporation | Audio Amplifier Class AB 1-Channel (Mono) 1.1W 8-QFN T/R RoHS : Compliant |
| 31,500 | ||
| LV4923VH-TLM-H | SANYO Semiconductor Co Ltd | Audio Amplifier 36-SOP RoHS : Compliant |
| 4,000 | ||
![]() Sager | TSW-149-23-T-S | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 243 | |
| 54923BEUB | ABB Group | Fixed Terminal Blocks | 0 | |||
| 5.49233.0081402 | RAFI USA Inc | Industrial Panel Mount Indicators / Switch Indicators Pushbutton-Illuminat Industrial Controls |
| 0 | ||
| 1744492-3 | TE Connectivity | EP II HOUSING 03P, RED |
| 0 | ||
| 9007249-23 | Honeywell Sensing and Control / MICRO SWITCH | PACKING, PREFORMED |
| 0 | ||
| TSW-149-23-G-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SSW-149-23-G-S-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SSW-149-23-H-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-149-23-F-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 17492318 | SOLERO TECHNOLOGIES SHELBY LLC | KENDRION INC. |
| 0 | ||
| 0349-2-31-01-34-14-10-0 | Mill-Max Mfg Corp | Headers & Wire Housings Recept with No Tail RoHS : Not Compliant |
| 0 | ||
| 5.49.233.005/1000 | RAFI USA Inc | Industrial Panel Mount Indicators / Switch Indicators SCREW-ON LENS TRANSP. COLOURLESS | 0 | |||
| CA1-X0-04-923-9D1-C | Carling Technologies | Circuit Breakers | 0 | |||
| AP17-1R-27492-3 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 5.49.233.005/1301 | RAFI USA Inc | Industrial Panel Mount Indicators / Switch Indicators SCREW-ON LENS TRANSPARENT RED |
| 0 | ||
![]() Ameya Holding Limited | LM34923MM/NOPB![]() | Texas Instruments | RoHS : Compliant | 406 | ||
BD4923G-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
BD4923FVE-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
![]() ComSIT USA | BU4923GTR | ROHM Semiconductor | Processor Supervisor 2.3V 1 Active Low/CMOS 5-Pin SSOP T/R RoHS : Compliant | 6,000 | ||
| L4923L | STMicroelectronics | Electronic Component RoHS : Not Compliant | 5,700 | |||
![]() Interstate Connecting Components | 1-174923-1 | TE Connectivity | 070 MLC W-W PLUG HSG 6P F/A RoHS : Compliant |
| 0 | |
| 249-2308-000 | ITT Interconnect Solutions | KJA0-25F POS N SHELL ASSY | 0 | |||
| 249-2315-101 | ITT Interconnect Solutions | KJA7-21W-A SHELL ASSY | 0 | |||
| A850492329X | Amphenol PCD | M8504923-29X | 0 | |||
| A850492374X | Amphenol PCD | M8504923-74X | 0 | |||
| 249-2302-201 | ITT Interconnect Solutions | KJA0-13W-B SHELL ASSY | 0 | |||
| 249-2313-001 | ITT Interconnect Solutions | KJA7-17W POS N SHELL ASSY | 0 | |||
| 1744492-3 | TE Connectivity | EP II Housing 03P, Red |
| 0 | ||
| A850492345X | Amphenol PCD | M8504923-45X | 0 | |||
| M85049/23-31N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/23-31N | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Non Env-EMI/RFI |
| 0 | ||
| M85049/23-50W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Non Env-EMI/RFI |
| 0 | ||
| M85049/23-50W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/23-66Z | Amphenol PCD | M8504923-66Z | 0 | |||
| M85049/23-66Z | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
![]() PEI Genesis | S4923H1307S34-5 | SOURIAU-SUNBANK |
| 0 | ||
| M85049/23-18S | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-31N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-31N | Amphenol PCD |
| 0 | |||
| M85049/23-33B | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-50W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-50W | Amphenol PCD |
| 0 | |||
| M85049/23-5S | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-63S | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-66Z | Amphenol PCD |
| 0 | |||
| M85049/23-68N | Amphenol PCD |
| 0 | |||
| M85049/23-68N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-8Z | Amphenol PCD |
| 0 | |||
| M85049/23-11B | SOURIAU-SUNBANK |
| 0 | |||
| M85049/23-41S | SOURIAU-SUNBANK |
| 0 | |||
![]() Chip 1 Exchange | 2N4923G![]() | onsemi | INSTOCK RoHS : Compliant | 91,000 | ||
| 6-1376492-3 | TE Connectivity | INSTOCK RoHS : Compliant | 24,570 | |||
| 5749231-1 | TE Connectivity | INSTOCK RoHS : Compliant | 11,423 | |||
| 174923-2 | TE Connectivity | INSTOCK RoHS : Compliant | 7,754 | |||
| 5749230-1 | TE Connectivity | INSTOCK RoHS : Compliant | 5,453 | |||
| L4923L | STMicroelectronics | INSTOCK | 3,000 | |||
| 194923- | ERNI | INSTOCK | 1,333 | |||
| 2N4923 | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 270 | |||
![]() Avnet Abacus | 5749231-1 | TE Connectivity | DIN Audio Video Connector 6 Contacts Jack PCB Mount Through Hole Right Angle (Alt: 5749231-1) RoHS : Compliant | 9,324 | ||
| 5749231-1 | TE Connectivity | DIN Audio Video Connector 6 Contacts Jack PCB Mount Through Hole Right Angle (Alt: 5749231-1) RoHS : Compliant | 3,700 | |||
| 1849230 | Phoenix Contact | LPC 15 6ST381LR LPC156ST381LR (Alt: 1849230) RoHS : Compliant | 0 | |||
| 964923-1 | TE Connectivity | FAST STEHGH48 3P (Alt: 964923-1) RoHS : Compliant | 0 | |||
| 174923-2 | TE Connectivity | Conn Housing PL 6 POS 35mm Crimp ST Cable Mount (Alt: 174923-2) RoHS : Compliant | 0 | |||
| 459854923 | Molex | (Alt: 459854923) RoHS : Compliant | 0 | |||
| 1-174923-1 | TE Connectivity | Conn Housing PL 6 POS 35mm Crimp ST Cable Mount (Alt: 1-174923-1) RoHS : Compliant | 0 | |||
| 754923-000 | TE Connectivity | Connector Accessories TinelLock Backshell with Ring Size 121414S RA Aluminum Alloy Cadmium Fini (Alt: 754923-000) RoHS : Not Compliant | 0 | |||
| 2149231124 | Molex | (Alt: 2149231124) RoHS : Compliant | 0 | |||
| 2149231124 | Molex | (Alt: 2149231124) RoHS : Compliant | 0 | |||
| 2149231223 | Molex | PICOBLADE PRECRIMP 26AWG RD MS L225 Sn (Alt: 2149231223) RoHS : Compliant | 0 | |||
| 2149231212 | Molex | (Alt: 2149231212) RoHS : Compliant | 0 | |||
| 6-146492-3 | TE Connectivity | (Alt: 6-146492-3) RoHS : Compliant | 0 | |||
| 2149231121 | Molex | (Alt: 2149231121) RoHS : Compliant | 0 | |||
| 1-1616492-3 | TE Connectivity | BB494H BASE CONTACTOR SUPPORT (Alt: 1-1616492-3) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | SLG4AR49231V | Renesas Electronics Corporation | (Alt: SLG4AR49231V) RoHS : Compliant | 0 | ||
| 5554923-1 | TE Connectivity | (Alt: 5554923-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 2N4923G![]() | onsemi | 10 A 80 V NPN Bipolar Power Transistor ONSSPCTRNSTLT1T0R (Alt: 2N4923G) RoHS : Compliant | 2,000 | ||
BU4923G-TR![]() | ROHM Semiconductor | (Alt: BU4923G-TR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 5749231-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 573 | |
| 2N4923 | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 155 | ||
LM34923MMX/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 55 | ||
| 492.350-BK | Conduant Corporation | IN STOCK SHIP TODAY |
| 20 | ||
| 749233-1 | TE Connectivity | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | MS35649-2384.D | Military Specifications | NUT DFARS COMPLIANT REQUIRED |
| 1,896 | |
| MS35649-2384 | Military Specifications |
| 1,052 | |||
| 49-230708-000A | Southco | SOU93-314 |
| 5 | ||
| 4923 | Heyco | FIVP 1093 BLACK | 0 | |||
| 20044923 | Essentra Components | 0 | ||||
| D1-004-923-010 | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| 1492-38-N | RAF Electronic Hardware | 0 | ||||
| 20594923 | Essentra Components | 19.2-19.4MM PULL HOSE PLUGEVA | 0 | |||
![]() EBV Elektronik | 2N4923G![]() | onsemi | 10 A 80 V NPN Bipolar Power Transistor ONSSPCTRNSTLT1T0R (Alt: 2N4923G) RoHS : Compliant | 0 | ||
| CM8071504549230S RL4H | Intel Corporation | Microprocessor Core i912900K 64Bit 16 Core 32GHz 1700Pin FCLGA Tray (Alt: 99AMTT) RoHS : Compliant | 0 | |||
![]() Flip Electronics | 2N4923G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 480 | |
![]() Master Electronics | 754923-000 | TE Connectivity | TXR54AB90-1412BI RoHS : Not Compliant |
| 8 | |
| 1-174923-1 | TE Connectivity | 070 MLC W-W PLUG HSG 6P F/A RoHS : Compliant |
| 0 | ||
| 249-2308-000 | ITT Interconnect Solutions | KJA0-25F Pos N Shell Assy / 249-2308-000 / Circular RoHS : Not Compliant |
| 0 | ||
| 249-2315-101 | ITT Interconnect Solutions | KJA7-21W-A Shell Assy; 38999 Series I II And Iii RoHS : Not Compliant |
| 0 | ||
| CDLL4923/TR | Microchip Technology Inc | Temperature Compensated RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-149-230 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 54923BEUB | Thomas & Betts | Copper One-Hole Lug - 90 Degree Bend Long Barrel - Blind End - Wire Size 750 kcmil - 5/8 Inch Bolt Size - Tin Plated - Die Code 106 - Die Color Code Black. RoHS : Compliant |
| 0 | ||
| 249-2302-201 | ITT Interconnect Solutions | KJA0-13W-B Shell Assy; 38999 Series I II And Iii RoHS : Not Compliant |
| 0 | ||
| 249-2313-001 | ITT Interconnect Solutions | KJA7-17W Pos N Shell Assy / 249-2313-001 / Circular RoHS : Not Compliant |
| 0 | ||
| TSW-149-23-STL-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-149-23-T-S | Samtec Inc | Conn Unshrouded Header HDR 49 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 9007249-23 | Honeywell Sensing and Control | PACKING PREFORMED RoHS : Compliant |
| 0 | ||
| SSW-149-23-H-S-RA-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SSW-149-23-STL-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-149-23-G-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1492-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 300 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 300 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1492-300 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1492-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 300 inch length using LMR-240-UF coax. |
| 1,314 | |
| PE3C8492-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Fire Rated N Male to N Female Bulkhead Low PIM Cable 36 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to N female bulkhead low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to N female bulkhead low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8492-36, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8492-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8492-36 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to N female bulkhead low PIM cable 36 inch length using SPF-250 coax using Times Microwave parts. |
| 52 | ||
| PE3C9492-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 36 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9492-36 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9492-36 is built with RG58 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable 36 inch length using RG58 coax. |
| 6 | ||
| PE3C6492-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX005, RF Cable Type: PE-SR086LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 2.92mm Male to 2.92mm Male Low Loss Cable 36 Inch Length Using 086 Coax., Radio frequency assembly 2.92mm male to 2.92mm male low loss cable 36 inch length using 086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 2.92mm male to 2.92mm male low loss cable 36 inch length using 086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our low loss 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C6492-36, can also be known as a low loss 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6492-36 is built with PE-SR086LL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male low loss cable 36 inch length using 086 coax. |
| 3 | ||
| PE3C4923-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On BMA Jack to Snap-On BMA Jack Cable 6 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to snap-on BMA jack cable 6 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to snap-on BMA jack cable 6 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4923-6, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4923-6 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BMA jack to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to snap-on BMA jack cable 6 inch length using LMR-100 coax. |
| 0 | ||
| PE3492-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using RG402 Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3492-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3492-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using RG402 coax. |
| 0 | ||
| PE3W04923/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. BNC Female to N Male Cable Using RG223 Coax with HeatShrink. PE3W04923/HS is a BNC female to N male cable using RG223 coax. This Pasternack BNC female to N male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our female BNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04923/HS BNC female to N male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3C4923-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 60 inches. Snap-On BMA Jack to Snap-On BMA Jack Cable 60 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to snap-on BMA jack cable 60 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to snap-on BMA jack cable 60 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4923-60, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4923-60 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BMA jack to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to snap-on BMA jack cable 60 inch length using LMR-100 coax. |
| 0 | ||
| PE3C4923-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 36 inches. Snap-On BMA Jack to Snap-On BMA Jack Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to snap-on BMA jack cable 36 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to snap-on BMA jack cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4923-36, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4923-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BMA jack to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to snap-on BMA jack cable 36 inch length using LMR-100 coax. |
| 0 | ||
| PE3W14923/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. SMA Male to 1.0/2.3 Plug Cable Using TFT-5G-402 Coax with HeatShrink. PE3W14923/HS is a SMA male to 1.0/2.3 plug cable using TFT-5G-402 coax. This Pasternack SMA male to 1.0/2.3 plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male SMA to plug 1.0/2.3 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14923/HS SMA male to 1.0/2.3 plug cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C4923-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On BMA Jack to Snap-On BMA Jack Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to snap-on BMA jack cable 24 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to snap-on BMA jack cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4923-24, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4923-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BMA jack to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to snap-on BMA jack cable 24 inch length using LMR-100 coax. |
| 0 | ||
| PE3C4923 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to Snap-On BMA Jack Cable Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to snap-on BMA jack cable using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to snap-on BMA jack cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4923, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4923 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BMA jack to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to snap-on BMA jack cable using LMR-100 coax. | 0 | |||
| PE3C4923-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 12 inches. Snap-On BMA Jack to Snap-On BMA Jack Cable 12 Inch Length Using LMR-100 Coax., Radio frequency assembly snap-on BMA jack to snap-on BMA jack cable 12 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to snap-on BMA jack cable 12 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4923-12, can also be known as a BMA female to BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4923-12 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BMA jack to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA female to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to snap-on BMA jack cable 12 inch length using LMR-100 coax. |
| 0 | ||
| PE3C4492-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly SMA male to SMA male right angle cable 36 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C4492-36 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C4492-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4492-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 36 inch length using PE-P086 coax. |
| 0 | ||
| PE3W14923 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to SMA Male Cable Using TFT-5G-402 Coax. PE3W14923 is a 1.0/2.3 plug to SMA male cable using TFT-5G-402 coax. This Pasternack 1.0/2.3 plug to SMA male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm SMA for connector 2. Our plug 1.0/2.3 to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14923 1.0/2.3 plug to SMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
![]() Vyrian | BU4923G-TR![]() | ROHM Semiconductor | Power Supply Support Circuit, Fixed, 1 Channel, +2.3V, CMOS, PDSO5 RoHS : Compliant | 15,838 | ||
| TLE4923HALA1 | Infineon Technologies AG | Hall Effect Sensor, 2mT Min, 2mT Max, Rectangular, Through Hole Mount | 12,144 | |||
LM4923MMX![]() | Texas Instruments | Audio Amplifier, 1.1W, 1 Channel(s), 1 Func, PDSO8 RoHS : Not Compliant | 9,034 | |||
| 1749230 | Phoenix Contact | Barrier Strip Terminal Block, 41A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,835 | |||
| LM4923LQBD | Texas Instruments | 8,394 | ||||
LM4923MM![]() | Texas Instruments | Audio Amplifier, 1.1W, 1 Channel(s), 1 Func, PDSO8 RoHS : Not Compliant | 8,101 | |||
| LM4923MMX/NOPB | Texas Instruments | Audio Amplifier, 1.1W, 1 Channel(s), 1 Func, PDSO8 RoHS : Compliant | 6,522 | |||
TLC4923RHB![]() | Texas Instruments | LED Driver, 16-Segment, CMOS, PQCC32 | 6,486 | |||
LM34923EVAL/NOPB![]() | Texas Instruments | Development kits/Accessories | 6,090 | |||
| LM34923MM | Texas Instruments | Switching Regulator, PDSO10 | 5,124 | |||
LM4923LQX![]() | Texas Instruments | Audio Amplifier, 1.1W, 1 Channel(s), 1 Func, Bipolar RoHS : Not Compliant | 4,303 | |||
| 2N4923 | National Semiconductor Corporation | Power Bipolar Transistor, 3A I(C), 80V V(BR)CEO, 1-Element, NPN, Silicon, TO-225, Plastic/Epoxy, 3 Pin RoHS : Not Compliant | 3,859 | |||
| L4923 | STMicroelectronics | RoHS : Not Compliant | 3,672 | |||
| LM34923MMX | Texas Instruments | Switching Regulator, PDSO10 | 3,397 | |||
| CT149236 | Micron Technology, Inc | 2,812 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |