502-38QCL-R Price, 销售商, Stock

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 24 inches. UHF Male to UHF Male Cable 24 Inch Length Using PE-C400 Coax., Radio frequency assembly UHF male to UHF male cable 24 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to UHF male cable 24 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our low loss UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE35021-24, can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE35021-24 is built with PE-C400 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 24 inch length using PE-C400 coax.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

302

PE7050-2

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 4 GHz, Impedance: 75 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 2 dB, Connector Series 1: BNC, Connector Gender 1: Male, Connector Series 2: BNC, Connector Gender 2: Female, Body Material: Brass, Body Plating: Nickel. 2 dB Fixed Attenuator, 75 Ohm BNC Male to 75 Ohm BNC Female Brass Nickel Body Rated to 2 Watts Up to 4 GHz. PE7050-2 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 75 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. The Pasternack PE7050-2 2 dB attenuator is rated for up to 4 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7050-2 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $188.99
10 : $181.43
25 : $173.87

PE3C8502-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 12 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to N type cable is a male to female coax assembly, PE3C8502-12, can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-12 can also be used in the other direction and will be type N female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts.

1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34

PE38502-24

Pasternack Enterprises

Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. UMCX Plug to MCX Plug Right Angle Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX plug right angle cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX plug right angle cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle UMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. This UMCX to MCX cable is a plug to plug coax assembly, PE38502-24, can also be known as a right angle UMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX male cable assembly PE38502-24 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38502-24 can also be used in the other direction and will be right angle MCX plug to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX plug right angle cable 24 inch length using RG178 coax.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3M0050-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 24 inches. MIL-DTL-17 N Female Bulkhead to TNC Male Cable 24 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to TNC male cable 24 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to TNC male cable 24 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/03-0503 type N to M39012/26-0011 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/26-0011 TNC cable is a female to male coax assembly, PE3M0050-24, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 N type jack to M39012/26-0011 TNC plug cable assembly PE3M0050-24 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 N type female bulkhead to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0050-24 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to TNC male cable 24 inch length using M17/84-RG223 coax.

1 : $338.99
25 : $322.04
50 : $305.09

PE33502LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 12 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33502LF-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33502LF-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 12 inch length using RG402 coax, RoHS.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3C5022

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 50 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm RG59 Coax., Radio frequency assembly 50 Ohm N male to 75 Ohm F male cable using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 50 Ohm N male to 75 Ohm F male cable using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our type N to type F cable assemblies have a male gender on end 1 and male on end 2. This type N to type F cable is a male to male coax assembly, PE3C5022, can also be known as a type N plug to F type plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3C5022 is built with RG59 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5022 can also be used in the other direction and will be F type male to type N male cable assembly if the opposite connectivity is required. Type N plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 50 Ohm N male to 75 Ohm F male cable using 75 Ohm RG59 coax.

PE3W05026

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to SMB Plug Cable Using PE-C100-LSZH Coax. PE3W05026 is a reverse polarity SMA female to SMB plug cable using PE-C100-LSZH coax. This Pasternack reverse polarity SMA female to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our reverse polarity female SMA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05026 SMA reverse polarity female to SMB plug cable assembly is constructed with PE-C100-LSZH coax.

PE3W05027/TN/HS

Pasternack Enterprises

PE33502LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 48 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 48 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 48 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33502LF-48, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33502LF-48 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 48 inch length using RG402 coax, RoHS.

1 : $149.99
25 : $142.49
50 : $134.99

PE15A5028

Pasternack Enterprises

Key Specifications, Frequency, Min: 0.15 MHz, Frequency, Max: 230 MHz, Gain, Min: 43 dB, 1dB Compression Point, Min: 41.8 dBm, 3rd Intercept Point, Typ: 48 dB, Voltage, DC Typ: 28 Volts, Current, DC Typ: 5,000 mA. 43 dB Gain, 25 Watt Psat, 0.15 MHz to 230 MHz, High Power LDMOS Amplifier, SMA Input, SMA Output, 48 dBm IP3, Class AB. RF solid state power amplifier (SSPA) PE15A5028 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 25 Watts. Pasternack solid state power amplifier part number PE15A5028 SMA high power amp has a 43 dB minimum gain. The high power high gain amp is rated with a Psat of 44 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 0.15 MHz and a maximum frequency of 230 MHz. Additional radio frequency specs on this high gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power high gain amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 25 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $5,700.0
5 : $5,472.0
10 : $5,244.0

PE33450-24

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm BNC Female to 75 Ohm BNC Female Cable 24 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly 75 Ohm BNC female to 75 Ohm BNC female cable 24 inch length using 75 Ohm RG11 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female to 75 Ohm BNC female cable 24 inch length using 75 Ohm RG11 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE33450-24, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE33450-24 is built with RG11 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female to 75 Ohm BNC female cable 24 inch length using 75 Ohm RG11 coax.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

PE35027-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE35027-48 can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE35027-48 is built with RG174 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this reverse polarity SMA right angle plug to reverse polarity SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35027-48 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 48 inch length using RG174 coax.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE3C3502

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50. TNC Male to MMCX Plug Cable Using LMR-100 Coax. PE3C3502 is a TNC male to MMCX plug cable using LMR-100A coax. This Pasternack TNC male to MMCX plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MMCX for connector 2. Our male TNC to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3502 TNC male to MMCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C5020LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C5020LF/HS can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5020LF/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. TNC plug to SMA plug cable assembly PE3C5020LF/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5020LF/HS can also be used in the other direction and will be a right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

Teledyne HiRel

5962-9055502LA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-8680502XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 250 NS ACCESS TIME
RoHS : Not Compliant

5962-87515023A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-90555023A

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-9154502MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8751502KA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8981502LA

Teledyne HiRel

PROM, UV ERASABLE, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8751502LC

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME

5962-9071502MZA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-8975502LA

Teledyne HiRel

PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR
RoHS : Not Compliant

5962-9158502MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-8873502KA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9215502MYA

Teledyne HiRel

PROM, 32K X 8, REGISTERED, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-8751502JA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8981502KA

Teledyne HiRel

PROM, UV ERASABLE, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

PWCR0603-QK-1502FT

VENKEL LTD

Pulse Withstanding CR;0603;1/10W;�100PPM;15K;�1%
RoHS : Compliant

PWCR1206-UK-1502DT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;15K;�0.5%
RoHS : Compliant

PWCR2010-WK-7502DT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;75K;�0.5%
RoHS : Compliant

HPTF0603-QP-1502UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;15K;�0.01%
RoHS : Compliant

HPTF1206-TC-1502UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;15K;�0.01%
RoHS : Compliant

HPTF1206-TP-1502DT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;15K;�0.5%
RoHS : Compliant

HPTF1206-UE-7502FT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;75K;�1%
RoHS : Compliant

HPTF1210-UC-1502AT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;15K;�0.05%
RoHS : Compliant

HPTF2010-UC-7502FT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;75K;�1%
RoHS : Compliant

TFCR0603-10W-K-1502DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;15K;�0.5%
RoHS : Compliant

TFCR0805-10W-C-7502DT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;75K;�0.5%
RoHS : Compliant

TFCR1206-8W-C-7502DT

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;75K;�0.5%
RoHS : Compliant

TFCR1206-8W-K-1502FT

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;15K;�1%
RoHS : Compliant

TFCR1210-4W-C-7502BT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;75K;�0.1%
RoHS : Compliant

TFCR1210-4W-E-1502FT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�25PPM;15K;�1%
RoHS : Compliant

Waytek, Inc.

0695020.PXPS

Littelfuse Inc

MCase+ 32VDC Slotted 20A
RoHS : Compliant

10 : $1.6508
50 : $1.5271
100 : $1.3868
200 : $1.3333
500 : $1.2832
1,000 : $1.2331

4,435

99502-P1000

FTZ Industries

1-1/2" Battery Terminal Bolt 5/16"-18 Zinc Plated

10 : $0.5759
2 : $0.5446
5 : $0.5258
10 : $0.5039
20 : $0.4852

3,122

50250N

Hillsdale Terminal & Tool Inc

Nylon Ring Terminal 12-10 Gauge 5/16" Stud

50 : $0.1781
200 : $0.1616
500 : $0.1444
1,000 : $0.131
5,000 : $0.1248

2,830

1-2066502-3

TE Connectivity

TE 2 Position Mini Fuse Holder Cover
RoHS : Compliant

10 : $0.7734
50 : $0.7452
100 : $0.721
200 : $0.6848
500 : $0.6606
1,000 : $0.6364

1,793

174-S0-050-2

50A Manual Reset 1/4" Stud Surface Mount Circuit Breaker

1 : $30.04
5 : $26.81
10 : $25.13
50 : $23.72
100 : $22.6
200 : $21.48

296

11-502

Pollak

5-Way Trailer Connector Socket POLLAK PN 11-502

1 : $8.23
10 : $7.01
50 : $6.39
100 : $6.16
200 : $5.97
500 : $5.82

277

174-S2-250-2

250A Manual Reset 3/8" Studs Surface Mount Circuit Breaker HI AMP TYPE III series17new

1 : $36.69
5 : $34.59
10 : $33.44
50 : $31.91
100 : $30.38

180

177-S8-050-2-R

Series 17 Compact Style Hi Amp Circuit Breaker w/Trip Guard, 50A, 48VDC

1 : $27.44
5 : $24.49
10 : $22.96
50 : $21.55
100 : $20.64
200 : $19.62

107

175-S2-150-2R

150A Standard Manual Reset w/Push to Trip 3/8" Studs Surface Mount Circuit Breakers

1 : $28.8456
5 : $26.9064
10 : $25.6944
50 : $22.7844
100 : $21.7548
200 : $20.3604

175-P1-150-2

150A Manual Push to Trip Reset 1/4" Stud 90° Panel Mount Circuit Breaker

1 : $32.66
5 : $29.16
10 : $27.33
50 : $25.65
100 : $24.42
200 : $23.35

5028

Blue Sea Systems

ST Blade Fuse Block ATO ATC 6 Circuits & Cover**RETAIL** 100A PER BLOCK 30A PER CIRCUIT

1 : $43.68
10 : $43.68

NPG-0502G

Thomas & Betts

Quick Conn Cable Gland, Nylon Thread Size 1/2",Cable Range 10-14mm,Insert Length 10mm,Gry

1 : $6.99
50 : $5.84
100 : $5.07
200 : $4.78
500 : $4.57

533-P0-050-22

Battery Disconnect w/ Circuit Breaker, 50A, 32VDC

1 : $54.73
5 : $48.93
10 : $45.71
50 : $43.14
100 : $41.0
200 : $39.07

174-S3-150-2

150A Manual Reset 3/8" Studs Surface S X S Circuit Breaker HI AMP SIDE-BY-SIDE 46929

1 : $30.73
5 : $27.43
10 : $25.7
50 : $24.27
100 : $23.12
200 : $21.98

171-P0-050-2

50A Automatic Reset 1/4" Stud Panel Mount Circuit Breaker 46910 49510

1 : $24.27
5 : $21.66
10 : $20.3
50 : $19.17
100 : $18.26
200 : $17.35

Win Source Electronics

2SAR502EBTL

ROHM Semiconductor

TRANS PNP 30V 0.5A EMT3F / Bipolar (BJT) Transistor PNP 30 V 500 mA 520MHz 150 mW Surface Mount EMT3F (SOT-416FL)
RoHS : Compliant

5,830 : $0.0577
4,675 : $0.0599
3,600 : $0.0623
2,510 : $0.067
1,620 : $0.0693
760 : $0.074

135,000

43025-0200

Molex

CONN RECEPT 2POS 3MM VERT DUAL
RoHS : Compliant

5,795 : $0.0518
4,330 : $0.0578
3,345 : $0.0598
2,435 : $0.0617
1,570 : $0.0637
645 : $0.0777

90,000

502352-0200

Molex

2.0 W/B CONN 2CKT EMBSTP PKG
RoHS : Compliant

2,555 : $0.1175
2,050 : $0.1222
1,575 : $0.127
1,100 : $0.1366
710 : $0.1413
335 : $0.1509

56,560

5023520200

Molex

CONN HEADER SMD R/A 2POS 2MM

2,555 : $0.1175
2,050 : $0.1222
1,575 : $0.127
1,100 : $0.1366
710 : $0.1413
335 : $0.1509

56,560

REF5025ID

Texas Instruments

IC VREF SERIES 0.05% 8SOIC / Series Voltage Reference IC Fixed 2.5V V ±0.05% 10 mA 8-SOIC
RoHS : Compliant

124 : $2.4228
100 : $2.5213
77 : $2.6197
54 : $2.8167
35 : $2.9152
17 : $3.1122

30,000

AP6502SP-13

Diodes Incorporated

IC REG BUCK ADJ 2A SYNC 8SO
RoHS : Compliant

170 : $1.7705
136 : $1.8425
105 : $1.9144
73 : $2.0584
47 : $2.1304
22 : $2.2743

25,000

3314J-1-502E/TS4YJ502

Bourns Inc

805 : $0.419
600 : $0.4674
465 : $0.4835
340 : $0.4996
220 : $0.5156
90 : $0.6284

11,919

LM5021MMX-2/NOPB

Texas Instruments

IC PWM CTLR AC-DC CURR 8VSSOP / AC to DC Switching Converter Flyback 560kHz T/R 8-Pin VSSOP
RoHS : Compliant

280 : $1.081
225 : $1.1249
175 : $1.1688
120 : $1.2567
80 : $1.3007
40 : $1.3885

10,500

LP38502ASD-ADJ/LP38502ASDX-ADJ

Texas Instruments

215 : $1.5648
161 : $1.7453
125 : $1.8054
91 : $1.8656
59 : $1.9258
24 : $2.3471

9,299

74455022

Wurth Elektronik

POWER-CHOKE WE-PD 4 | FIXED IND 2.2UH 2.4A 70 MOHM SMD
RoHS : Compliant

325 : $1.04
245 : $1.16
190 : $1.2
140 : $1.24
90 : $1.28
40 : $1.5599

7,700

LM5025SDX/NOPB

Texas Instruments

IC REG CTRLR FWRD CONV 16WSON
RoHS : Compliant

204 : $1.4773
152 : $1.6478
118 : $1.7046
86 : $1.7614
55 : $1.8182
23 : $2.216

6,560

DRV5023FIEDBZRQ1

Texas Instruments

MAGNETIC SWITCH UNIPOLAR SOT23-3 / Digital Switch Unipolar Switch Open Drain Hall Effect SOT-23-3
RoHS : Compliant

1,080 : $0.2785
805 : $0.3106
625 : $0.3213
455 : $0.332
295 : $0.3427
120 : $0.4177

6,000

74438335022

Wurth Elektronik

FIXED IND 2.2UH 1.8A 108MOHM SMD
RoHS : Compliant

440 : $0.7664
330 : $0.8548
255 : $0.8842
185 : $0.9137
120 : $0.9433
50 : $1.1496

5,498

LMZ20502SILR/LMZ20502SILT

Texas Instruments

12 : $25.3512
10 : $26.3817
8 : $27.4123
6 : $29.4733
4 : $30.5039
2 : $32.5649

5,330

ADRF5024BCCZN

Analog Devices Inc

IC RF SWITCH SPDT 40GHZ 12LGA / RF Switch IC General Purpose SPDT 50Ohm 12-LGA (2.25x2.25)
RoHS : Compliant

3 : $124.091
2 : $138.4091
1 : $143.1819

1,000

Wuhan P&S

MJ15025G

onsemi

Silicon Power Transistors
RoHS : Compliant

1 : $11.34
100 : $7.24
500 : $5.97
1,000 : $5.49

7,400

10145028-030LF

Amphenol FCi

Wire-to-board connector, socket, 30 positions, left and right double row

1 : $5.58
100 : $2.24
500 : $2.07
1,000 : $2.01

5,000

UJ4C075023B7S

onsemi

Silicon Carbide (SiC) Cascode JFET
RoHS : Compliant

1 : $30.75
100 : $19.63
500 : $16.19
1,000 : $14.88

2,400

10025026-10002TLF

Amphenol FCi

PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P
RoHS : Compliant

1 : $3.68
100 : $3.51
500 : $3.07
1,000 : $2.96

1,200

502-38QCL-R 销售商

链接网址