| 数据搜索系统,热门电子元器件搜索 |
|
525L-AF5-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() DigiKey | RCWE080525L0FMEA![]() | Vishay Dale | RES 0.025 OHM 1% 1/4W 0805 RoHS : Compliant |
| 3,718 | |
RCWE080525L0FMEA![]() | Vishay Dale | RES 0.025 OHM 1% 1/4W 0805 RoHS : Compliant |
| 3,718 | ||
RCWE080525L0FMEA![]() | Vishay Dale | RES 0.025 OHM 1% 1/4W 0805 RoHS : Compliant |
| 3,718 | ||
| 525L32010ITR | CTS Corporation | XTAL OSC TCXO 32.0000MHZ SNWV RoHS : Compliant |
| 3,201 | ||
| 525L32010ITR | CTS Corporation | XTAL OSC TCXO 32.0000MHZ SNWV RoHS : Compliant |
| 3,201 | ||
| 525L32010ITR | CTS Corporation | XTAL OSC TCXO 32.0000MHZ SNWV RoHS : Compliant |
| 3,000 | ||
| PH2525L,115 | Rochester Electronics LLC | NEXPERIA PH2525L - 100A, 25V, 0. |
| 2,850 | ||
| OWR-081525L-32B | OLE WOLFF Elektronik | SPEAKER 32OHM 15MW TOP PT 90.7DB |
| 2,133 | ||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | IC REG BOOST 3V 160MA SC70-6 RoHS : Compliant |
| 1,472 | ||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | IC REG BOOST 3V 160MA SC70-6 RoHS : Compliant |
| 1,472 | ||
| TSW-105-25-L-S | JRH ELECTRONICS | CONN HEADER VERT 5POS 2.54MM |
| 809 | ||
| TSW-105-25-L-D-RA | Samtec Inc | CONN HEADER R/A 10POS 2.54MM RoHS : Compliant |
| 419 | ||
| TSW-125-25-L-D | JRH ELECTRONICS | CONN HDR .100" 50POS |
| 139 | ||
| TSW-105-25-L-D | JRH ELECTRONICS | PIN HEADER, BOARD-TO-BOARD, 2.54 |
| 50 | ||
| UU126/75/25-LP3 | Maanshan New Conda Magentic Industrial Co Ltd | FERRITE CORE U LP3 1PC |
| 37 | ||
![]() Newark | HTSW-105-25-L-D | Samtec Inc | HEADER, 2.54MM, VERTICAL THT, 10WAY; RoHS : Compliant |
| 908 | |
| MC33FS6525LAE | NXP Semiconductors | SYSTEM BASIS CHIP, CAN FD, LIN; RoHS : Compliant |
| 350 | ||
| MTMS-105-25-L-S-125 | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 5POS; RoHS : Compliant |
| 269 | ||
| HMTMS-105-25-L-D-005 | Samtec Inc | PIN HEADER, HMTMS-105-25-L-D-005; RoHS : Compliant |
| 251 | ||
| HTSW-115-25-L-D-LL | Samtec Inc | HEADER, 2.54MM, THT VERT, 30WAY; RoHS : Compliant |
| 209 | ||
| TSW-115-25-L-S-RA | Samtec Inc | HEADER, 2.54MM, THT, R/A, 15WAY; RoHS : Compliant |
| 196 | ||
| MTMS-115-25-L-S-125 | Samtec Inc | HDR, BRD-TO-BRD, 1.27MM, 15POS; RoHS : Compliant |
| 135 | ||
| 91910-21525LF | Amphenol Communications Solutions | HEADER, SMD, 1MM, 25WAY; RoHS : Not Compliant |
| 133 | ||
| HTSW-125-25-L-T-LL | Samtec Inc | HEADER, 2.54MM, THT VERT, 75WAY; RoHS : Compliant |
| 123 | ||
CMC-4015-25L100![]() | Same Sky | MICROPHONE, ECM, OMNI, -22DB, 10VDC; RoHS : Compliant |
| 95 | ||
| PFS7525L | Power Integrations | PFC CONTROLLER, CCM, 10.2V-15V, ESIP-16; RoHS : Compliant |
| 80 | ||
| 202K185-25L-0 | TE Connectivity | HEAT SHRINK BOOT, ELASTOMER, BLK; Boot Configuration:Straight Lipped; I.D. Supplied - Imperial:2.6"; I.D. Supplied - Metric:66mm; Shrink Tubing / Boot Colour:Black; Total Length - Imperial:6.69"; Total Length - Metric:170mm RoHS Compliant: Yes RoHS : Compliant |
| 77 | ||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | DC/DC CONV, SYNC BOOST, 85DEG C; RoHS : Compliant |
| 10 | ||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | DC/DC CONV, SYNC BOOST, 85DEG C; RoHS : Compliant |
| 10 | ||
| EKI-2525LI-AE | Advantech Co Ltd | ENET MODULE, DIN RAIL/PANEL, RJ45X5; RoHS : Compliant |
| 5 | ||
![]() Analog Devices Inc | LTC3525LESC6-3#TRMPBF | Analog Devices Inc | 400mA uP Sync Boost DC/DC Conv RoHS : Compliant |
| 28,934 | |
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | 400mA uP Sync Boost DC/DC Conv RoHS : Compliant |
| 7,795 | ||
| MAX4525LEUB+ | Analog Devices Inc | Low-Voltage, Single-Supply Ana RoHS : Compliant |
| 2,472 | ||
| MAX4525LEUB+T | Analog Devices Inc | Low-Voltage, Single-Supply Ana RoHS : Compliant |
| 0 | ||
![]() RS | 5-25L | Chemtronics | SOLDER REMOVAL BRAID .050" |
| 1 | |
| 525L050 | Goodyear Belts | SYNCHRONOUS BELT, L SECTION, 13 MM WIDTH, 9.53 MM PITCH, 140 TEETH, 1334 MM L |
| 0 | ||
| 66925525LF | Amphenol FCi | 66925-525LF-30 GOLD CARD CONN |
| 0 | ||
| PT65525L508 | APEM Inc | DIP ROTARY SWITCH P60 10MM RoHS : Compliant |
| 0 | ||
| D2525-L12-12 | Brennan Industries | L12MBT-12MM BUTTWELD 90DEG |
| 0 | ||
| 9191031525LF | Amphenol FCi | 1MM SMT VERT PLUG, 7.0MM LEAD FREE |
| 0 | ||
| NCM125-25L300 | SMC Corporation of America | BOOT FOR NCM, NCM SERIES |
| 0 | ||
| 10080054525LF | Amphenol FCi | 10080054-525LF-PF HDR ASSY SEAHOUSE 4WA |
| 0 | ||
| MXZ25-25L-M9PZ | SMC CYLINDERS | CYLINDER W/LINEAR GUIDE, COMPACT, MXZ SERIES |
| 0 | ||
| D2525-L10-10-SS | Brennan Industries | L10MBT-10MM BUTTWELD 90DEG STNLS |
| 0 | ||
| IPH-24B-5-25-LTT-11 | Nachi America | Pump, Hydraulic, Double IP, size 24, IPH Series |
| 0 | ||
| IPH-24B-6.5-25-LT-11 | Nachi America | Pump, Hydraulic, Double IP, size 24, IPH Series |
| 0 | ||
| NWL21525L8CST-UNV-DIM | Day-Brite CFI by Signify | NWL21525L8CST_UNV_DIM |
| 0 | ||
| IPH-24B-6.5-25-LTT-11 | Nachi America | Pump, Hydraulic, Double IP, size 24, IPH Series |
| 0 | ||
| LTILC5S-6S-BL-AM/GN-MBL/28V (RLL-49227525|LTILC5S-6S-BL-AM/GN-MBL/28V|LTILC5S6SB | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Bisco Industries | NAS1352-5LE16P | B&B Specialties Inc | 300 | |||
| 2525LF10 | MISC. INDUSTRIAL HRD | 50 | ||||
| NAS1352-5LE20P | NAS SOCKET CAP SCREWS | 1 | ||||
| 15-25L | MISCELLANEOUS | 1 | ||||
![]() Rochester Electronics | PH2525L,115![]() | NXP Semiconductors | Power Field-Effect Transistor, 100A I(D), 25V, 0.0039ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant |
| 2,850 | |
PH2525L,115![]() | Nexperia | Power Field-Effect Transistor, 100A I(D), 25V, 0.0039ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant |
| 3,158 | ||
CAT525LI![]() | onsemi | Digital Potentiometer, 1 Func PDIP20 RoHS : Compliant | 1,872 | |||
| LMX2525LQ1321 | National Semiconductor Corporation | PLL Frequency Synthesizer RoHS : Not Compliant |
| 6,000 | ||
![]() TME | TSW-105-25-L-D-RA | Samtec Inc | Connector: pin strips; pin header; male; PIN: 10; THT; TSW; straight RoHS : Compliant |
| 900 | |
| RE525-LF | Roth Elecronik GmbH | Board: universal; single sided; W: 100mm; L: 160mm |
| 13 | ||
| BM2525L | BM Group spa | Cable gland; M25; IP68; brass |
| 5 | ||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 0.5÷4.5VDC; Uout: 3VDC; 0.45A; SC70; SMD RoHS : Compliant |
| 0 | ||
| FB2500L-B20/15-25L | Fagor Electrónica | Bridge rectifier: single-phase; Urmax: 50V; Ufmax: 1.1V; If: 25A |
| 0 | ||
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | LED; green; SMD; 16÷18lm; 3.5x2.8mm; 120°; 60mA; λd: 518nm; 3.15V RoHS : Compliant |
| 0 | ||
| GN31525L | Lovato Electric Inc | Switch: reversing cam switch; Stabl.pos: 3; 315A; 1-0-2; Pos: 3 |
| 0 | ||
| FB2501L-B40/35-25L | Fagor Electrónica | Bridge rectifier: single-phase; Urmax: 100V; Ufmax: 1.1V; If: 25A |
| 0 | ||
| 1512525L3 | CML Innovative Technologies | LED lamp; S5,7s,T1-3/4; white warm; 12VDC; 12VAC; plastic; 3mm |
| 0 | ||
CMC-4015-25L100![]() | Same Sky | Microphone; electret; 100Hz÷20kHz; 2.2kΩ; -25dB; Ø4x1.5mm; 500uA RoHS : Compliant |
| 0 | ||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | PMIC; DC/DC converter; Uin: 0.5÷4.5VDC; Uout: 3VDC; 0.45A; SC70-6 RoHS : Compliant |
| 0 | ||
| XCMD2525L1 | Telemechanique Sensors | Limit switch |
| 0 | ||
![]() Interstate Connecting Components | SNLF-S-C35-25L-R | ITT Interconnect Solutions | SNLF-S-C35-25L-R | 0 | ||
| SNLM-P-C35-25L-BN | ITT Interconnect Solutions | SNLM-P-C35-25L-BN | 0 | |||
| SNPFL-S-C25-25L-GN | ITT Interconnect Solutions | SNPFL-S-C25-25L-GN RoHS : Compliant | 0 | |||
| SNLF-S-S25-25L-BL | ITT Interconnect Solutions | SNLF-S-S25-25L-BL | 0 | |||
| SNLF-S-S35-25L-Y | ITT Interconnect Solutions | SNLF-S-S35-25L-Y | 0 | |||
| SNLM-P-S35-25L-BK | ITT Interconnect Solutions | SNLM-P-S35-25L-BK | 0 | |||
| SNLF-S-S35-25L-BK | ITT Interconnect Solutions | SNLF-S-S35-25L-BK RoHS : Compliant | 0 | |||
| SNLM-P-C35-25L-BK | ITT Interconnect Solutions | SNLM-P-C35-25L-BK | 0 | |||
| SNLM-P-C35-25L-GN | ITT Interconnect Solutions | SNLM-P-C35-25L-GN | 0 | |||
| 91910-21525LF | Amphenol FCi | CONAN HEADER LF RoHS : Compliant |
| 0 | ||
| 91911-31525LF | Amphenol FCi | CONAN HEADER RoHS : Compliant |
| 0 | ||
| SNLF-S-C35-25L-BL | ITT Interconnect Solutions | SNLF-S-C35-25L-BL | 0 | |||
| 66925-525LF | Amphenol FCi | 30 GOLD CARD CONN RoHS : Compliant |
| 0 | ||
| 202K185-25L-0 | TE Connectivity | 202K185-25L-0 CV7365-000 RoHS : Compliant |
| 0 | ||
| SNLF-S-C35-25L-BN | ITT Interconnect Solutions | SNLF-S-C35-25L-BN | 0 | |||
![]() Powell Electronics | TSW-105-25-L-D-RA | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 1,918 | |
| TSW-105-25-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 809 | ||
| TSW-105-25-L-D | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 636 | ||
| DW-05-10-S-D-525-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 438 | ||
| DW-07-10-S-D-525-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 382 | ||
| TSW-115-25-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 264 | ||
| TSW-105-25-L-S-RA | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 264 | ||
| HMTMS-105-25-L-D-005 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 166 | ||
| TSW-125-25-L-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 139 | ||
| TSW-115-25-L-T | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 139 | ||
| MTMS-115-25-L-S-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 89 | ||
| 91910-21525LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 88 | ||
| HMTMS-115-25-L-D-125 | Samtec Inc | .100 End Shrouded Terminal Strip RoHS : Compliant |
| 80 | ||
| HMTMS-145-25-L-D-115 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 50 | ||
| HTSW-135-25-L-D-LA | Samtec Inc | PCB Header, High-Profile, Through-Hole, RoHS : Compliant |
| 25 | ||
![]() Richardson RFPD | 525L25DT13M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | ||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | Conv DC-DC 0.5V to 4.5V Synchronous Step Up Single RoHS : Compliant |
| 0 | ||
| 10-FZ071SA075S501-L525L58 | Vincotech | POWERIGBT TRANSISTOR RoHS : Compliant |
| 0 | ||
| 525L25DT12M80000 | CTS Corporation | Osc TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L05CT40M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L05DT40M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L05DA40M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L20005IAR | CTS Corporation | Clipped Sine Wave TCXO/VC-TCXO Ceramic Surface Mou RoHS : Compliant | 0 | |||
| 525L25CA13M0000 | CTS Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| 525L05IA40M000 | CTS Corporation | OSCILLATOR VCXO RoHS : Compliant | 0 | |||
| LTC3525LESC6-3#TRMPBF | Analog Devices Inc | Conv DC-DC 0.5V to 4.5V Synchronous Step Up Single RoHS : Compliant |
| 0 | ||
| 525L10IA19M2000 | CTS Corporation | Osc TCXO/VCTCXO RoHS : Compliant | 0 | |||
| WHM30-2525LE | WanTcom | Low Noise Wide Band Amplifier RoHS : Not Compliant |
| 0 | ||
| 109998-HMC525LC4 | Analog Devices Inc | HMC525LC4 Up-Down Converter and Mixer Evaluation B RoHS : Compliant | 0 | |||
| WHM30-2525LE-EB | WanTcom | RF MW Amp Eval Bd | 0 | |||
![]() Chip 1 Exchange | TSW-125-25-L-D | INSTOCK | 14 | |||
![]() Component Electronics, Inc | PPS142-1A1525-L | TE Connectivity | IN STOCK SHIP TODAY | 975 | ||
| SE2525L | SIGE SEMICON | IN STOCK SHIP TODAY | 30 | |||
| SE2525L-R | SIGE SEMICON | IN STOCK SHIP TODAY | 5 | |||
![]() EBV Elektronik | PFS7525L | Power Integrations | (Alt: PFS7525L) RoHS : Compliant | 0 | ||
| C17525_LISA4-WWW | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 60 Spot Beam PMMA Clear (Alt: C17525_LISA4-WWW) RoHS : Compliant | 0 | |||
| 67-22S/G2C-D1525L4L82934Z6/2T | Everlight Electronics Co Ltd | Low Power LEDs none SSL (Alt: S10C007518) RoHS : Compliant | 0 | |||
| 67-22S/G1C-D1525L4L82936Z6/2T | Everlight Electronics Co Ltd | (Alt: S10C008455) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 202K185-25L-0 | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | |
222K185-25L-0![]() | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | ||
![]() Flip Electronics | MC33FS6525LAE | NXP Semiconductors | Stock RoHS : Compliant | 1,000 | ||
![]() Master Electronics | SNLF-S-C35-25L-R | ITT Interconnect Solutions | Veam Powerlock & Snaplock |Itt Cannon SNPFL-S-C50-25L-R RoHS : Compliant |
| 0 | |
| S1SDT-10-28-GF-05.25-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-105-25-L-Q-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-115-25-L-D-LA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-105-25-L-Q-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-115-25-L-D-LA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-225-25-L-T-RA-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMS-115-25-L-S-125 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-125-25-L-D-000 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-150-13-S-D-525-LA-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-02-20-L-52.5-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-04-20-L-52.5-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-125-25-L-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-215-25-L-D-RA | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| TSW-115-25-L-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 5-25L | Chemtronics | Desoldering Braid / Solder Removal Chem-Wik Rosin |
| 50 | |
| EKI-2525LI-AE | Advantech Co Ltd | Unmanaged Ethernet Switches 5 FE Low Profile Unmanaged Switch w/Wide |
| 21 | ||
![]() Pasternack Enterprises US | PE33525LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Cable 36 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly N male to N male cable 36 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 36 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE33525LF-36, can also be known as a type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE33525LF-36 is built with RG188 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 36 inch length using RG188 coax, RoHS. |
| 964 | |
| PE33525LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Cable 24 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly N male to N male cable 24 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 24 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE33525LF-24, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE33525LF-24 is built with RG188 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 24 inch length using RG188 coax, RoHS. |
| 964 | ||
| PE33525LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Male Cable 48 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly N male to N male cable 48 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 48 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE33525LF-48, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE33525LF-48 is built with RG188 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency N type male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 48 inch length using RG188 coax, RoHS. |
| 964 | ||
| PE33525LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Cable 60 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly N male to N male cable 60 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 60 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE33525LF-60, can also be known as a N type plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE33525LF-60 is built with RG188 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 60 inch length using RG188 coax, RoHS. |
| 964 | ||
| PE36525LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50. 1.85mm Male to 1.85mm Male Cable Using PE-SR405FL Coax, RoHS. PE36525LF is a 1.85mm male to 1.85mm male cable using PE-SR405FL coax. This Pasternack 1.85mm male to 1.85mm male cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 1.85mm to male 1.85mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE36525LF 1.85mm male to 1.85mm male cable assembly is constructed with PE-SR405FL coax and the maximum VSWR is 1.4:1. | 10 | |||
| PE36525LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. 1.85mm Male to 1.85mm Male Cable 18 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-18, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-18 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 10 | ||
| PE3525LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable Using RG402 Coax, RoHS. PE3525LF is a SMA female 2 hole flange to SMA female 2 hole flange cable using RG402 coax. This Pasternack SMA female 2 hole flange to SMA female 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 2 hole flange to female SMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3525LF SMA female 2 hole flange to SMA female 2 hole flange cable assembly is constructed with RG402 coax and the maximum VSWR is 1.4:1. | 7 | |||
| PE3525LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 60 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 60 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 60 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-60, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-60 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 60 inch length using RG402 coax, RoHS. |
| 1 | ||
| PE3525LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 12 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 12 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 12 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 12 inch length using RG402 coax, RoHS. |
| 1 | ||
| PE3525LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 36 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 36 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 36 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-36, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 36 inch length using RG402 coax, RoHS. |
| 1 | ||
| PE3525LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 18 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3525LF-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3525LF-18 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using RG402 coax, RoHS. |
| 1 | ||
| PE36525LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. 1.85mm Male to 1.85mm Male Cable 24 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-24, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 24 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
| PE3W02525LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG225 Coax with HeatShrink, RoHS. PE3W02525LF/HS is a BNC male to BNC male cable using RG225 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02525LF/HS BNC male to BNC male cable assembly is constructed with RG225 coax. | 0 | |||
| PE36525LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. 1.85mm Male to 1.85mm Male Cable 6 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 6 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 6 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-6, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 6 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
| PE36525LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 1.85mm Male to 1.85mm Male Cable 36 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 36 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 36 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36525LF-36, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36525LF-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 36 inch length using PE-SR405FL coax, LF solder, RoHS. |
| 0 | ||
![]() Sager | TSW-105-25-L-D-RA | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 2,906 | |
| TSW-125-25-L-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 210 | ||
| MTMS-115-25-L-S-125 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 135 | ||
| HTSW-125-25-L-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-215-25-L-D-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-115-25-L-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-225-25-L-Q-LA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| PT65525L508 | IDEC Corporation | DIP ROTARY SWITCH P60 10MM |
| 0 | ||
| TSW-105-25-L-D-NA | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 0 | ||
| TSW-205-25-L-Q-RA | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 0 | ||
| TSW-215-25-L-D-LA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-205-25-L-Q-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-215-25-L-D-LA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-135-25-L-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMS-105-25-L-D-125 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TE Connectivity | 222K185-25L-0![]() | TE Connectivity | 222K185-25L-0 Body Orientation: Right Angle Molded Part Shape Code: 222 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Right Angle 222 25 | Part Number: 222K185-25L-0 | Internal Number: CV7372-000 | TE Connectivity RoHS : Compliant |
| 54 | |
![]() Teledyne HiRel | 54ACT2525LMQB | Teledyne HiRel | CLOCK DRIVER, MINIMUM SKEW | 0 | ||
![]() Vyrian | AP1184K5-25L-U | Diodes Incorporated | Fixed Positive LDO Regulator, 2.5V, 0.85V Dropout, BIPolar, PSSO5 | 12,090 | ||
| PH2525L | Nexperia | Power Field-Effect Transistor, 100A I(D), 25V, 0.0039ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 11,296 | |||
| LTC3525LESC6-3#TRPBF | Analog Devices Inc | Switching Regulator, 0.45A, CMOS, PDSO6 RoHS : Compliant | 11,152 | |||
| HMC525LC4TR-R5 | Analog Devices Inc | 8,373 | ||||
MT5C1605-25LAT![]() | Micron Technology Inc | Standard SRAM, 4KX4, 25ns, CMOS, PDIP22 RoHS : Not Compliant | 6,854 | |||
| PH2525LT/R | Nexperia | Power Field-Effect Transistor, 100A I(D), 25V, 0.0039ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 | 6,604 | |||
MT5C1005-25LPAT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 5,253 | |||
MT5LC1005-25LIT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 4,511 | |||
MT5C1005-25LAT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 4,100 | |||
MT5C1605-25LIT![]() | Micron Technology Inc | Standard SRAM, 4KX4, 25ns, CMOS, PDIP22 RoHS : Not Compliant | 3,536 | |||
MT5C1005-25LIT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 3,202 | |||
MT5LC1005-25LPIT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 3,128 | |||
MT5LC1005-25LAT![]() | Micron Technology Inc | Standard SRAM, 256KX4, 25ns, CMOS, PDIP28 RoHS : Not Compliant | 2,570 | |||
| HMC525LC4TR | Hittite Microwave | Image Rejection Mixer, 4000MHz Min, 8500MHz Max, 11dB Conversion Loss-Max | 501 | |||
MAX4525LEUB-T![]() | Maxim Integrated Products | DPDT, 1 Func, 2 Channel, CMOS, PDSO10 RoHS : Not Compliant | 455 | |||
![]() Win Source Electronics | HMC525LC4TR | Analog Devices Inc | Up/Down Conv Mixer 8.5GHz 24-Pin CQFN EP T/R / IC MMIC IQ MIXER 4-8.5GHZ 24-QFN RoHS : Compliant |
| 300 | |
| HMC525LC4 | Analog Devices Inc | GaAs MMIC I/Q MIXER 4 - 8.5 GHz | IC MMIC IQ MIXER 4-8.5GHZ 24-QFN RoHS : Compliant |
| 300 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |