| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow |
 Pasternack Enterprises US | PE7088-0
| Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.4:1, Attenuation: 0 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 0 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Passivated Stainless Steel Body Rated to 1 Watt Up to 40 GHz. PE7088-0 is a fixed 0 dB attenuator from Pasternack. This 0dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7088-0 0 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7088-0 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 0dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. | 1 : $577.99 10 : $554.87 25 : $531.75
|
| 175
 |
PE3W17088-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax., Pasternack’s PE3W17088-18 SMA male to SMA male RF cable assembly using PE-SR402FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17088-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17088-18 RF cable has an FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W17088-18 SMA plug to SMA plug cable assembly is built with PE-SR402FLJ, which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 1 : $66.29 25 : $62.98 50 : $59.66 100 : $57.01
|
| 23
 |
PE3W10708
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMB Plug Right Angle Cable Using LMR-195 Coax. PE3W10708 is a N male right angle to SMB plug right angle cable using LMR-195 coax. This Pasternack N male right angle to SMB plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. N right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10708 N male right angle to SMB plug right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
 |
PE34708
| Pasternack Enterprises | | | 0
|
PE37080/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 10-32 Male to BNC Female Cable Using RG174 Coax with HeatShrink. PE37080/HS is a 10-32 male to BNC female cable using RG174 coax. This Pasternack 10-32 male to BNC female cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm BNC for connector 2. Our male 10-32 to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37080/HS 10-32 male to BNC female cable assembly is constructed with RG174 coax. | | 0
 |
PE3W24708LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Violet FAKRA Plug to FAKRA Plug Cable Using RG188 Coax, LF Solder. PE3W24708LF is a FAKRA plug to FAKRA plug cable using RG188 coax. This Pasternack FAKRA plug to FAKRA plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our plug FAKRA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24708LF FAKRA plug to FAKRA plug cable assembly is constructed with RG188 coax. | | 0
 |
PE3C4708LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG8X Coax with HeatShrink, LF Solder, RoHS. PE3C4708LF/HS is a BNC male to SMA male cable using RG8X coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4708LF/HS BNC male to SMA male cable assembly is constructed with RG8X coax. | | 0
 |
PE3C10708-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male Right Angle to Reverse Polarity SMA Plug Right Angle Cable 24 Inch Length Using RG58 Coax., Pasternack’s PE3C10708-24 right angle type N male to right angle SMA plug RF cable assembly using RG58 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to SMA plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle type N cable connection on one end and a right angle reverse polarity SMA cable connection on the other. Our type N to reverse polarity SMA cable assembly has a male gender on end 1 and a plug on end 2. PE3C10708-24 can also be known as a right angle type N plug to right angle reverse polarity SMA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.96-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10708-24 RF cable has a pvc (nc) jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This PE3C10708-24 type N plug to reverse polarity SMA male cable assembly is built with RG58, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the solder/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10708-24 can also be used in the other direction and will be a right angle reverse polarity SMA plug to right angle type N male cable assembly if the opposite connectivity is required. This type N right angle plug to SMA reverse polarity right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. | 1 : $111.17 10 : $106.72 25 : $102.28 100 : $97.83
|
| 0
 |
PE3FCA708-1M
| Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Type A MPO/UPC Female (w/o pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 8 Fiber, Single Mode OS2, OFNP Jacket-1M. Pasternack’s PE3FCA708-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/o pins)/UPC key up to LC/UPC duplex clip connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 40G BiDi and parallel optics connectivity, reduced-fiber-count data center architectures, MPO to LC equipment breakout cabling, high-speed switch and server interconnects and telecom and enterprise fiber routing systems. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA708-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA708-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. | 1 : $84.4 5 : $82.71 10 : $81.02 25 : $79.34
|
| 0
 |
PE3C9708
| Pasternack Enterprises | | | 0
 |
PE3W03708
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. Reverse Polarity N Female to SMA Female Cable Using RG213 Coax. PE3W03708 is a reverse polarity N female to SMA female cable using RG213 coax. This Pasternack reverse polarity N female to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03708 N reverse polarity female to SMA female cable assembly is constructed with RG213 coax. | | 0
 |
PE3W17082
| Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. HN Male to Reverse Polarity N Male Cable Using RG393 Coax. PE3W17082 is a HN male to reverse polarity N male cable using RG393 coax. This Pasternack HN male to reverse polarity N male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. Our male HN to reverse polarity male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17082 HN male to N reverse polarity male cable assembly is constructed with RG393 coax. | | 0
 |
PE3C5708LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using PE-C240 Coax, LF Solder. PE3C5708LF is a N female bulkhead to SMA male cable using PE-C240 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5708LF N female bulkhead to SMA male cable assembly is constructed with PE-C240 coax. | | 0
 |
PE3W25708
| Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable Using RG393 Coax. PE3W25708 is a 7/16 DIN male to HN male cable using RG393 coax. This Pasternack 7/16 DIN male to HN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm HN for connector 2. Our male 7/16 DIN to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25708 7/16 DIN male to HN male cable assembly is constructed with RG393 coax. | | 0
 |
PE3C4708LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG8X Coax, LF Solder, RoHS. PE3C4708LF is a BNC male to SMA male cable using RG8X coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4708LF BNC male to SMA male cable assembly is constructed with RG8X coax. | | 0
 |
 Venkel Ltd. | RFCA3708A0T
| VENKEL LTD | RF Ceramic Antenna;3708;2.4GHz RoHS : Not Compliant | | 0
 |
 Win Source Electronics | MAX708TESA-T
 | onsemi | IC SUPERVISOR 1 CHANNEL 8SOIC RoHS : Not Compliant | 360 : $0.8418 270 : $0.9389 210 : $0.9713 150 : $1.0036 100 : $1.036 40 : $1.2626
|
| 70,000
 |
LM70880RRXR
| Texas Instruments | SYNCHRONOUS BUCK CONVERTER RoHS : Compliant | 61 : $4.921 46 : $5.4888 36 : $5.6781 26 : $5.8674 17 : $6.0566 7 : $7.3815
|
| 66,000
 |
IRFH7085TRPBF
| Infineon Technologies AG | MOSFET N-CH 60V 23A 6-PQFN / Trans MOSFET N-CH Si 60V 23A 8-Pin PQFN EP T/R RoHS : Compliant | 645 : $0.4664 485 : $0.5202 375 : $0.5381 270 : $0.5561 175 : $0.574 75 : $0.6995
|
| 28,092
 |
APW7088QAE-TRG
| Anpec Electronics Corporation | Two-Phase Buck PWM Controller with Integrated MOSFET Drivers | 585 : $0.6654 470 : $0.6931 360 : $0.7207 250 : $0.7762 165 : $0.8038 80 : $0.8593
|
| 19,600
 |
NCV7708FDWR2G
| onsemi | AUTOMOTIVE DRIVER RoHS : Compliant | 64 : $4.7176 48 : $5.2619 37 : $5.4434 27 : $5.6248 18 : $5.8062 8 : $7.0763
|
| 18,900
 |
53047-0810
| Molex | 1.25mm (.049") Pitch PicoBlade™ Wire-to-Board Header, Vertical, with Friction Lock, 8 Circuits RoHS : Compliant | 1,220 : $0.2467 910 : $0.2752 705 : $0.2847 510 : $0.2942 330 : $0.3036 140 : $0.37
|
| 17,250
 |
ADG708BRU
 | Analog Devices Inc | CMOS, 3 ohm Low Voltage 4-/8-Channel Multiplexers | IC MULTIPLEXER 8X1 16TSSOP RoHS : Not Compliant | 168 : $1.7911 126 : $1.9977 97 : $2.0666 71 : $2.1355 46 : $2.2044 19 : $2.6866
|
| 13,730
 |
ADG708BRUZ-REEL7
 | Analog Devices Inc | Analog Multiplexer Single 8:1 16-Pin TSSOP T/R / IC MULTIPLEXER 8X1 16TSSOP RoHS : Compliant | 163 : $1.8479 131 : $1.923 101 : $1.9981 70 : $2.1483 45 : $2.2234 22 : $2.3737
|
| 12,570
 |
IRFR3708TRLPBF
| Infineon Technologies AG | MOSFET N-CH 30V 61A DPAK RoHS : Compliant | 118 : $2.5607 88 : $2.8561 68 : $2.9546 50 : $3.0531 32 : $3.1516 14 : $3.841
|
| 12,010
 |
AD708JN
 | Analog Devices Inc | Op Amp Dual Precision Amplifier ±18V 8-Pin PDIP N / IC OPAMP GP 900KHZ 8DIP RoHS : Not Compliant | 39 : $8.6925 29 : $9.6956 23 : $10.0299 17 : $10.3643 11 : $10.6986 5 : $13.0388
|
| 4,900
 |
DS1708SESA+T
| Maxim Integrated Products | | 35 : $9.7792 26 : $10.9076 20 : $11.2837 15 : $11.6598 10 : $12.0359 4 : $14.6688
|
| 3,210
 |
DS1708SESA+T&R
 | Maxim Integrated Products | IC MICROMONITOR 3.3V 10% 8-SOIC RoHS : Compliant | 35 : $9.7792 26 : $10.9076 20 : $11.2837 15 : $11.6598 10 : $12.0359 4 : $14.6688
|
| 3,050
 |
APW7080KAI-TRG
| Anpec Electronics Corporation | 4A, 26V, 380kHz, Asynchronous Step-Down Converter / ASYNCHRONOUS STEP-DOWN CONVERTER | 260 : $1.3138 195 : $1.4653 150 : $1.5158 110 : $1.5663 70 : $1.6169 30 : $1.9705
|
| 2,270
 |
AD7708BRZ-REEL7
 | Analog Devices Inc | IC ADC 16BIT SIGMA-DELTA 28SOIC RoHS : Compliant | 28 : $11.108 21 : $12.3896 16 : $12.8169 12 : $13.2441 8 : $13.6713 4 : $16.6619
|
| 2,000
 |
AUIPS7081S
| Infineon Technologies AG | IC SWITCH HI-SIDE 1CH D2-PAK-5 / Current Limit SW 1-IN 1-OUT -0.3V to 5.5V 5A Automotive 5-Pin(4+Tab) D2PAK Tube RoHS : Compliant | 460 : $0.6587 345 : $0.7347 265 : $0.76 195 : $0.7854 125 : $0.8107 55 : $0.9881
|
| 1,275
 |