| 数据搜索系统,热门电子元器件搜索 |
|
7580L-AF5-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() DigiKey | CGSTAPE-8758-0.5" X 36 YDS | CGS Tape | 5 Mil TAPE POLYIMIDE Tape + Line |
| 10,000 | |
| LC75804W-E-ON | Rochester Electronics LLC | 1/3, 1/4 DUTY LCD DISPLAY DRIVER |
| 5,500 | ||
TPS75801KTTR![]() | Texas Instruments | IC REG LINEAR POS ADJ 3A TO263 RoHS : Compliant |
| 1,250 | ||
TPS75801KTTR![]() | Texas Instruments | IC REG LINEAR POS ADJ 3A TO263 RoHS : Compliant |
| 1,000 | ||
| MBR7580R | Daco Semiconductor Co Ltd | DIODE SCHOTTKY REV 80V 75A DO5 |
| 500 | ||
| LC75804WS-E-SY | Rochester Electronics LLC | 1/3, 1/4 DUTY LCD DISPLAY DRIVER |
| 360 | ||
| 71T75802S100PFGI | Rochester Electronics LLC | IC SRAM 18MBIT PAR 100TQFP |
| 209 | ||
| 71T75802S200BG | Rochester Electronics LLC | IC SRAM 18MBIT PARALLEL 119PBGA |
| 16 | ||
| 157.5917.5801 | Littelfuse Inc | FUSE STRIP 80A 48VDC BOLT MOUNT RoHS : Compliant |
| 10 | ||
| 787580-0R8 | NI | THUNDERBOLT 3 TYPE-C CABLE, PASS |
| 2 | ||
| 1227580 | Phoenix Contact | CABLE MOD 8PC8PC PLUG TO PLUG CA RoHS : Compliant |
| 1 | ||
| 1457580030 | Weidmüller Interface GmbH & Co. KG | CBL CIRC RoHS : Compliant |
| 1 | ||
| 4000-75800-1715004 | Murrelektronik GmbH | MODLIGHT ILLUMIX SLIM LINE 4W, L RoHS : Compliant |
| 1 | ||
| 7580 | 3M Interconnect | 3M RESPIRATOR REPLACEMENT ST |
| 0 | ||
| 7580 | Eaton Interconnect | RECP DUPLEX 15/10A 125/250V 3P3W |
| 0 | ||
![]() Newark | 1758034 | Phoenix Contact | TERMINAL BLOCK, HEADER, 4POS, TH; RoHS : Compliant |
| 1,407 | |
| MCAS648075-800U | SPC Multicomp | FILTER, EMI, 80UH, 500 MA, 50V; RoHS : Compliant |
| 919 | ||
| 2787580000 | Weidmüller Interface GmbH & Co. KG | TERMINAL BLOCK, WTB, 3POS, 24A, 630V; RoHS : Compliant |
| 576 | ||
| 7580K4 | Eaton Corporation | SWITCH, TOGGLE, SPST, 6A, 250V; Switch Operation:On-Off; Contact Configuration:SPST; Illumination:Non Illuminated; Product Range:7500 Series; Contact Current Max:6A; Switch Mounting:-; Contact Voltage AC Nom:250V; Switch Features:BatRoHS Compliant: Yes RoHS : Compliant |
| 387 | ||
| P758-006 | Tripp Lite | CONNECTOR TYPE A:HD-15 PLUG / USB A PLUG; RoHS : Compliant |
| 255 | ||
| 1758076 | Phoenix Contact | TERMINAL BLOCK, HEADER, 8POS, TH; RoHS : Compliant |
| 229 | ||
| 2847580000 | Weidmüller Interface GmbH & Co. KG | TERMINAL BLOCK, DIN RAIL, 4POS, 12AWG; No. of Positions:4Positions; Wire Size AWG Min:28AWG; Wire Size AWG Max:12AWG; Conductor Area CSA:2.5mm²; Wire Connection Method:Push In; Rated Current:24A; Rated Voltage:800V; No. of Levels:1 RoHS Compliant: Yes RoHS : Compliant |
| 132 | ||
| 1375800-4 | TE Connectivity | BOARD-BOARD CONNECTOR RECEPTACLE 120WAY, 4ROW; Connector Systems:Board-to-Board; Pitch Spacing:2mm; No. of Rows:4Rows; No. of Contacts:120Contacts; Connector Mounting:Through Hole Mount; Product Range:-; Gender:Receptacle RoHS Compliant: Yes RoHS : Compliant |
| 111 | ||
| FX5(75)-80X80T2900 | KEMET Corporation | NOISE SUPPRESSION SHEET, 80X80X0.075MM; RoHS : Compliant |
| 80 | ||
| 7580K6 | Eaton Corporation | SWITCH, TOGGLE, SPST, 6A, 250V; Switch Operation:On-Off; Contact Configuration:SPST; Illumination:Non Illuminated; Product Range:7500 Series; Contact Current Max:6A; Switch Mounting:-; Contact Voltage AC Nom:250V; Switch Features:BatRoHS Compliant: Yes RoHS : Compliant |
| 66 | ||
| MR7580-9P2AR | Glenair Inc | RoHS : Not Compliant |
| 56 | ||
| FG1(75)-80X80T2900 | KEMET Corporation | NOISE SUPPRESSION SHEET, 80X80X0.075MM; RoHS : Compliant |
| 47 | ||
| 1227580 | Phoenix Contact | ENET CABLE, CAT6A, RJ45 PLUG-PLUG, 2M; RoHS : Compliant |
| 15 | ||
| R191758000 | Radiall | INTER SERIES CONNECTOR ADAPTER CONVERT F; RoHS : Compliant |
| 10 | ||
| 1-5380758-0 | TE Connectivity | SOCKET, 6.65MM, 20-16 AWG; No. of Contacts:1Contacts; Connector Type:PCB Socket; Pitch Spacing:-; Product Range:-; Row Pitch:-; Contact Material:Beryllium Copper; Contact Plating:Tin Plated Contacts RoHS Compliant: Yes RoHS : Compliant |
| 8 | ||
![]() Analog Devices Inc | MAX17580ATC+ | Analog Devices Inc | 4.5V to 60V, 1A High-Efficienc RoHS : Compliant |
| 30 | |
| MAX17580EVKIT# | Analog Devices Inc | EVKIT for MAX17580. |
| 7 | ||
| MAX17580ATC+T | Analog Devices Inc | 4.5V to 60V, 1A High-Efficienc RoHS : Compliant |
| 0 | ||
AD7580AQ![]() | Analog Devices Inc | CMOS-CONVERTER IC RoHS : Not Compliant | 0 | |||
![]() RS | 75801 | APM HEXSEAL | SEELOC WASHER, THREAD SIZE #8,OUTER DIA 1/2" (12.7MM),MAX THRU-HOLE 1/4" (6.35MM) |
| 8,363 | |
| 1375800-6 | TE Connectivity | PCB RECEPTACLE, IDC, 120-C, PRESS FIT, HIGH TEMP, 3A, AMPMODU PC/104-PLUS SERIES RoHS : Compliant |
| 105 | ||
| 75802 | APM HEXSEAL | HARDWARE, SEELOC WASHER #8 SS W/SILICONE |
| 47 | ||
| 7758093 | RS Pro | SINGLE GANG BS STD BLANK PLATE WHITE |
| 39 | ||
| 7758062 | RS Pro | INDOOR PLUG SOCKET 1 GANGS TYPE G - BRITISH 13 A 230 V AC WHITE |
| 37 | ||
| 1758050 (MSTBV 2 5/ 6-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 6 POSITION COMBICON MSTBV SERIES |
| 31 | ||
| 1227580 | Phoenix Contact | NBC-R4OC/2 0-BC6A/R4OC RoHS : Compliant |
| 20 | ||
| 2-747580-2 | TE Connectivity | FERRULE, SHIELDING, HD-20, HDE-20, HDP-20, HDP-22, STRAIGHT, SHELL SIZE 4 RoHS : Compliant |
| 20 | ||
| SME312DQDP-75806 (75806) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 380MM, 10-30VDC, NPN/PNP, QD, MINI-BEAM |
| 13 | ||
| 7758078 | RS Pro | FUSED SPUR 13A WALL MOUNT 1 GANG 3.37 " X 3.37 " X 1.3 " UREA FORMALDEHYDE MATT |
| 9 | ||
| 7675803 | RS Pro | DIE CAST ZINC 40 FOOT PLATE CONNECTOR BRACKET & JOINT 0.3" M10 M8 THREAD |
| 2 | ||
| ZA75-80 | ABB Low Voltage Products and Systems | REPLACEMENT COIL, 220-230/230-240VAC, FOR USE WITH A45-A75 CONTACTOR |
| 2 | ||
| 0027580 (0027580 CX100) | Lapp Group | OLFLEX FD 855 P HALOGEN-FREE FLEX CABLE, 16AWG/18C, POLYURETHANE, GRAY |
| 1 | ||
| 7580 | Arrow Hart | RECP DUPLEX 15/10A 125/250V 3P3W H/L BK |
| 0 | ||
| 7580 | Pass & Seymour | 15A 125V 10A 250V NON-NEMA LOCKING DUPLEX RECEPTACLE |
| 0 | ||
![]() STMicroelectronics | ST7580 | STMicroelectronics | FSK, PSK multi-mode power line networking system-on-chip RoHS : Compliant |
| 1,318 | |
| EVALKITST7580-1 | STMicroelectronics | ST7580 Power Line Networking System On Chip Demonstration kit |
| 0 | ||
![]() Microchip Technology Inc | 2N7580T1 | Microchip Technology Inc | Power Mosfet_T1, Projected EOL: - Contact for Pricing | 0 | ||
| 090-02758-000 | Microchip Technology Inc | TIMESOURCE TIME-OF-DAY (TOD) DISTRIBUTION PANEL, Projected EOL: 2051-01-13 - Contact for Pricing RoHS : Compliant | 0 | |||
| VV-800-EAE-SAAN-74M1758000 | Microchip Technology Inc | VCXO, 5.0x3.2mm, +3.3V, -40-85C, +/-100ppm, 74.1758MHz, LDFN, Projected EOL: 2051-04-02 RoHS : Compliant |
| 0 | ||
| OX-3051-BEE-2075-80M0000000 | Microchip Technology Inc | OX-3051-BEE-2075-80M0000000, Projected EOL: 2051-06-29 - Contact for Pricing | 0 | |||
| EX-4211-DAE-7580-10M0000000 | Microchip Technology Inc | EX-4211-DAE-7580-10M0000000, Projected EOL: 2051-03-13 - Contact for Pricing | 0 | |||
| EX-4210-EAE-7580-52M0000000 | Microchip Technology Inc | EX-4210-EAE-7580-52M0000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| EX-4211-EAE-7580-100M000000 | Microchip Technology Inc | EX-4211-EAE-7580-100M000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| EX-4210-EAE-7580-100M000000 | Microchip Technology Inc | EX-4210-EAE-7580-100M000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
| VV-800-EAE-SAAN-74M1758000TR | Microchip Technology Inc | VCXO, 5.0x3.2mm, +3.3V, -40-85C, +/-100ppm, 74.1758MHz, LDFN, Projected EOL: 2051-04-02 RoHS : Compliant |
| 0 | ||
| VV-800-EAE-SAAN-74M1758000_SNPB | Microchip Technology Inc | VCXO, 5.0x3.2mm, +3.3V, -40-85C, +/-100ppm, 74.1758MHz, LDFN, Projected EOL: 2051-04-02 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | S7580 | Heyco | 1,250 | |||
| 21-03758-01 | RAF Electronic Hardware | 1,170 | ||||
| MS15975-808 | MS Washers | 1,134 | ||||
| MS15975-803 | Superior Washer & Gasket Company | 434 | ||||
| 7580-D-440-SS-20 | RAF Electronic Hardware | 344 | ||||
| NAS75-8-013 | Caliber Aero LLC | 300 | ||||
| NAS75-8-008 | NAS Bearings/Bushings | 256 | ||||
| 5199758-01 | Accurate Screw Machine | 225 | ||||
| 85-17-580-20 | Southco | 225 | ||||
| NAS75-8-020 | NAS Bearings/Bushings | 98 | ||||
| MS15975-802 | Superior Washer & Gasket Company | 68 | ||||
| C2758-014-4 | Tinnerman Fasteners | 50 | ||||
| NAS75-8-005 | Fastenair Corporation | 10 | ||||
| 24575-801 | nVent Schroff | RoHS : Compliant | 3 | |||
| NAS75-8-022 | NAS Bearings/Bushings | 2 | ||||
![]() Rochester Electronics | LC75809PTS-H | onsemi | Liquid Crystal Driver, 352-Segment, CMOS, PQFP100 RoHS : Compliant |
| 2,056 | |
AD7580KN![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Not Compliant |
| 293 | ||
AD7580KNZ![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Compliant |
| 420 | ||
TPS75801KTTR![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.225V 3A TO-263-6 T/R RoHS : Compliant |
| 1 | ||
5962-8775801RA![]() | Texas Instruments | 54AC245 - Bus Transceiver, 8-Bit, Bidirectional, with 3-State Inputs/Outputs RoHS : Not Compliant |
| 116 | ||
5962-9758001QEA![]() | Texas Instruments | Flip Flop Positive Edge 2 Element 5V 16-DIP Tube RoHS : Not Compliant | 198 | |||
TPS75801KC![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.225V 3A TO-220-5 Tube RoHS : Compliant |
| 11,250 | ||
| RHRU7580 | Harris Semiconductor | Rectifier Diode, Avalanche, 75A, 800V RoHS : Not Compliant |
| 68 | ||
71T75802S100BG![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 5ns, CMOS, PBGA119 RoHS : Not Compliant |
| 159 | ||
71T75802S100PF![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 5ns, CMOS, PQFP100 RoHS : Not Compliant |
| 19 | ||
71T75802S100PFGI![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 5ns, CMOS, PQFP100 RoHS : Compliant |
| 209 | ||
71T75802S100PFI![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 5ns, CMOS, PQFP100 RoHS : Not Compliant |
| 24 | ||
71T75802S166PFI![]() | Integrated Device Technology Inc | 1M X 18, 2.5V Synchronous ZBT SRAM 2.5V I/O, Burst Counter Pipelined Output RoHS : Not Compliant |
| 13 | ||
71T75802S200BG![]() | Integrated Device Technology Inc | ZBT SRAM, 1MX18, 3.2ns, CMOS, PBGA119 RoHS : Not Compliant |
| 16 | ||
71T75802S200BGG![]() | Integrated Device Technology Inc | 1M X 18, 2.5V Synchronous ZBT SRAM 2.5V I/O, Burst Counter Pipelined Output RoHS : Compliant |
| 30 | ||
![]() TME | 78758-0001 | Molex | 78758-0001 RoHS : Compliant |
| 29,000 | |
| 1-5380758-0 | TE Connectivity | 1-5380758-0 RoHS : Compliant |
| 4,441 | ||
| 1758050000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; terminal; 10A; PIN: 48; angled 45° RoHS : Compliant |
| 148 | ||
| 797580005 | Molex | Cable with crimped terminals; 0.15m; Mini-Fit Jr.male; 18AWG |
| 108 | ||
| 758-0019-15 | TE Connectivity | 758-0019-15 |
| 93 | ||
| 61.7580-22 | Stäubli Electrical Connectors | Wire: coaxial; RG58; 1x0.5mm2; stranded; Cu; Core section: 0.5mm2 |
| 40 | ||
| 8000075809 | Weidmüller Interface GmbH & Co. KG | 8000075809 RoHS : Compliant |
| 19 | ||
| 8000075808 | Weidmüller Interface GmbH & Co. KG | 8000075808 RoHS : Compliant |
| 9 | ||
| 797580008 | Molex | Cable with crimped terminals; 0.15m; Pico-SPOX female; 24AWG |
| 7 | ||
| 758-0190-17 | TE Connectivity | 758-0190-17 |
| 5 | ||
| 758-0130-15 | TE Connectivity | Connector: circular |
| 2 | ||
| 1227580 | Phoenix Contact | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; stranded; Cu; 2m RoHS : Compliant |
| 1 | ||
| 0875.800MXEP | Littelfuse Inc | Fuse: fuse; ceramic,cylindrical; 800mA; 250VAC; time-lag; 3.6x10mm RoHS : Compliant |
| 0 | ||
| 10047580 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 11; SMT; 3A; 250V; 1x11 |
| 0 | ||
| 1758034 | Phoenix Contact | Connector: pluggable terminal block; COMBICON M; 630V; PIN: 4; THT RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TLV75801PDBVT![]() | Texas Instruments | RoHS : Compliant | 264 | ||
![]() ComSIT USA | 1707580000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 36 | ||
| 1758047 | Phoenix Contact | AVAILABLE EU RoHS : Compliant | 17 | |||
TLV75801PDBVT![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 16 | |||
![]() ComSIT USA | FDMS7580 | Fairchild Semiconductor Corporation | N-CHANNEL POWER TRENCH MOSFET Power Field-Effect Transistor, 15A I(D), 25V, 0.0075ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,000 | ||
| 99616LM2CL7580SG6TR8TEU | Everlight Electronics Co Ltd | Single Color LED, Pure White, Water Clear RoHS : Not Compliant | 2,000 | |||
| ST7580 | STMicroelectronics | Telecom Circuit, 1-Func, CMOS, PQCC48 RoHS : Compliant | 260 | |||
TLV75801PDBVT![]() | Texas Instruments | Adjustable Positive LDO Regulator, 0.55V Min, 5.5V Max, 0.88V Dropout, PDSO5 RoHS : Compliant | 115 | |||
| MKP1847580354P2 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 8uF, Through Hole Mount RoHS : Compliant | 86 | |||
| MKP1847580354P4 | Vishay Intertechnologies | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 8uF, Through Hole Mount RoHS : Compliant | 27 | |||
AD7580KN![]() | Analog Devices Inc | LC2MOS 10-BIT SAMPLING A/D CONVERTER ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Not Compliant | 11 | |||
![]() Interstate Connecting Components | OQ1575800000G | Amphenol Anytek | OQ-5.0- 15P GREY CONTACT WITH | 0 | ||
| OQ05758000J0G | Amphenol Anytek | OQ-5.0- 5P GREY CONTACT WITH | 0 | |||
| OQ21758000J0G | Amphenol Anytek | OQ-5.0- 21P GREY CONTACT WITH | 0 | |||
| MR7580-9P2AR | Glenair Inc | MICRO-D VERTICAL MOUNT PRINTED CIRCUIT BOARD |
| 0 | ||
| AAC0758-00 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCPC424HP-M-23-PA-1-ZN | 0 | |||
| MR7580-100S2AN | Glenair Inc | MICRO-D VERTICAL MOUNT PRINTED CIRCUIT BOARD | 0 | |||
| MR7580-37S-2AP | Glenair Inc | MICRO-D VERTICAL MOUNT PRINTED CIRCUIT BOARD | 0 | |||
| MR7580-51S2BSU | Glenair Inc | MICRO-D VERTICAL MOUNT PRINTED CIRCUIT BOARD RoHS : Compliant |
| 0 | ||
| OQ0275800000G | Amphenol Anytek | OQ-5.0- 2P GREY CONTACT WITH | 0 | |||
| OQ17758000J0G | Amphenol Anytek | OQ-5.0- 17P GREY CONTACT WITH | 0 | |||
| GMR7580-25S1BTU | Glenair Inc | MICRO 25C .109PCB SKT UN THRD NI RoHS : Not Compliant | 0 | |||
| GMR7580-25S1BTU-MC403 | Glenair Inc | STRAIGHT CONDUIT FITTING PRINTED CIRCUIT CONS | 0 | |||
| GMR7580-31P1FTM | Glenair Inc | MICRO 31C R/A PCB PIN J/P PASS RoHS : Not Compliant | 0 | |||
| GMR7580-37S1BSM-513 | Glenair Inc | Metal Shell Micro-D Connectors for Printed Circuit Boards RoHS : Compliant | 0 | |||
| GMR7580-51P2BRN | Glenair Inc | MICRO-D CONNECTOR RoHS : Not Compliant | 0 | |||
![]() PEI Genesis | MM67075800007 | Amphenol PCD |
| 0 | ||
| MM67075800015 | Amphenol PCD |
| 0 | |||
| MM67075800003 | Amphenol PCD |
| 0 | |||
| MM67075800025 | Amphenol PCD |
| 0 | |||
| MM67075800045 | Amphenol PCD |
| 0 | |||
| 075-8005-022 | ITT Interconnect Solutions |
| 0 | |||
| MM67075800005 | Amphenol PCD |
| 0 | |||
| MM67075800027 | Amphenol PCD |
| 0 | |||
| MM67075800031 | Amphenol PCD |
| 0 | |||
| 030-1758-000 | ITT Interconnect Solutions |
| 0 | |||
| MM67075800013 | Amphenol PCD |
| 0 | |||
| MM67075800017 | Amphenol PCD |
| 0 | |||
| MM67075800039 | Amphenol PCD |
| 0 | |||
| MM67075800029 | Amphenol PCD |
| 0 | |||
| H5935-2239758-003 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 1-1939758-0 | TE Connectivity | Connectors RoHS : Compliant |
| 750 | |
| 3-1775801-6 | TE Connectivity | Card Edge Connectors RoHS : Compliant |
| 731 | ||
| 2-747580-2 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 533 | ||
| 3-1617758-0 | TE Connectivity | Relays RoHS : Not Compliant |
| 139 | ||
| 758-0130-17 | TE Connectivity | DEUTSCH CONNECTOR 758-0130-17 |
| 81 | ||
| 758-0019-15 | TE Connectivity | DEUTSCH CONNECTOR 758-0019-15 |
| 61 | ||
| 758-0018-17 | TE Connectivity | DEUTSCH CONNECTOR 758-0018-17 |
| 50 | ||
| 758-0050-11 | TE Connectivity | DEUTSCH CONNECTOR 758-0050-11 |
| 48 | ||
| 758-0018-09 | TE Connectivity | DEUTSCH CONNECTOR 758-0018-09 |
| 36 | ||
| 758-0130-25 | TE Connectivity | DEUTSCH CONNECTOR 758-0130-25 |
| 20 | ||
| 758-0110-23 | TE Connectivity | DEUTSCH CONNECTOR 758-0110-23 |
| 15 | ||
| 758-0018-21 | TE Connectivity | DEUTSCH CONNECTOR 758-0018-21 |
| 13 | ||
| 758-0018-11 | TE Connectivity | DEUTSCH CONNECTOR 758-0018-11 |
| 7 | ||
| GMR7580C-37P2BP-513 | Glenair Inc | MICRO-D CONNECTORS - MICRO-D CONNECTORS |
| 5 | ||
| 758-0110-09 | TE Connectivity | DEUTSCH CONNECTOR 758-0110-09 |
| 1 | ||
![]() Richardson RFPD | LFTVXO075802 | IQD Frequency Products | Oscillator VC-TCXO 10MHz ±1ppm (Tol) ±0.28ppm (Sta RoHS : Compliant |
| 0 | |
| OCTI117580 | Radiall | INTERCONNECT ACCESRY RoHS : Not Compliant | 0 | |||
| 4-1775801-6 | TE Connectivity | Conn PCI ExpressCard Edge SKT 164 POS 1mm Solder S RoHS : Compliant |
| 0 | ||
| R317580290 | Radiall | RF COAX PNL MT CONN | 0 | |||
| R404758000 | Radiall | TERMINATION 4.3-10 M SCREW 6 GHZ 30W RoHS : Compliant |
| 0 | ||
| LFTVXO075807REEL | IQD Frequency Products | Oscillator VC-TCXO 20MHz ±1ppm (Tol) ±0.28ppm (Sta RoHS : Compliant |
| 0 | ||
AD7580AQ![]() | Analog Devices Inc | 1-Channel Single ADC SAR 50ksps 10-bit Parallel 24 RoHS : Not Compliant | 0 | |||
| EVB_75800 | Skyworks Solutions Inc | RF MW AMP EVAL BD RoHS : Compliant | 0 | |||
| R-0758-0821-KEASB-R | Raltron Electronics Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | |||
| 935275809118 | NXP Semiconductors | I2C Bus Switch 1-Element 1-IN 20-Pin TSSOP T/R RoHS : Compliant | 0 | |||
| 10217758-00 | TE Connectivity | Air Bubble Detector using Ultrasonic Technology RoHS : Compliant |
| 0 | ||
| 935275804118 | NXP Semiconductors | High Performance Bus Switch IC RoHS : Compliant | 0 | |||
| 105-0758-001 | Cinch Connectivity Solutions | Conn Test Jack F 2 POS Solder RA Thru-Hole 1 Port RoHS : Compliant |
| 0 | ||
| LFTVXO075802CUTT | IQD Frequency Products | Oscillator VC-TCXO 10MHz ±1ppm (Tol) ±0.28ppm (Sta RoHS : Compliant |
| 0 | ||
| 3-1775801-6 | TE Connectivity | ConnCard Edge SKT 98 POS 1mm Solder ST Thru-Hole T RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 7580146023- | TE Connectivity | INSTOCK | 90,870 | ||
| 1-5380758-0 | TE Connectivity | INSTOCK RoHS : Compliant | 75,973 | |||
| 1-1939758-0 | TE Connectivity | INSTOCK RoHS : Compliant | 14,348 | |||
| E44758-000 | TE Connectivity | INSTOCK RoHS : Compliant | 14,157 | |||
| 1437580-4 | TE Connectivity | INSTOCK | 9,404 | |||
| 1375801-1 | TE Connectivity | INSTOCK RoHS : Compliant | 7,311 | |||
| 6-1337580-0 | TE Connectivity | INSTOCK RoHS : Compliant | 4,076 | |||
| 78758-0002 | Molex | INSTOCK RoHS : Compliant | 1,300 | |||
| 9410758021- | INSTOCK | 473 | ||||
| 86094327113758000E1 | Amphenol FCi | INSTOCK | 448 | |||
| 860943271137580000E1 | Amphenol FCi | INSTOCK | 224 | |||
| 1758018- | Phoenix Contact | INSTOCK | 136 | |||
TLV75801PDRVR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 131 | |||
| 077580/115 | CTC Coils Ltd | INSTOCK | 100 | |||
| 7580V | INSTOCK | 1 | ||||
![]() Component Electronics, Inc | 105-0758-001 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,535 | |
| 175-802 | Spaenaur | IN STOCK SHIP TODAY |
| 601 | ||
| 2-1437580-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | ||
| 175-802 | SPANAUR | IN STOCK SHIP TODAY | 250 | |||
| 175-800 | Spaenaur | IN STOCK SHIP TODAY | 250 | |||
| 747580-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 122 | ||
| 2-747580-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 57 | ||
| 2-747580-4 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 37 | |||
| 5-1617580-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 31 | ||
| 1758089 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| VG-1201CA74.175800M-TBGC | Seiko Epson Corporation | IN STOCK SHIP TODAY |
| 10 | ||
| 42203758-03SE | Honeywell Sensing and Control | IN STOCK SHIP TODAY |
| 8 | ||
| 1758092 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 7-5804 | International Rectifier | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 13RS037580 | Essentra Components | ROUND SPACER, .265 ID, .375 OD | 0 | ||
| 005375800014 | Essentra Components | SPACER 3.4X6X25 NATURAL POLYSTYRENE | 0 | |||
| S7580 | Heyco | 0 | ||||
| 7580-B-632-B-5 | RAF Electronic Hardware | 0 | ||||
| 7580-D-440-SS-20 | RAF Electronic Hardware | STAINLESS KNURLED FRONT 1/4 RND SWAGE STANDOFF | 0 | |||
| M2275-8012-SS-20 | RAF Electronic Hardware | 0 | ||||
| D42758-01 | Shercon Inc | 0 | ||||
| 85-17-580-20 | Southco |
| 0 | |||
| 497580 | Essentra Components | 0 | ||||
| SH-50-037-580 | SHEREX FASTENING SO | 0 | ||||
| M2275-8012-SS | RAF Electronic Hardware | 0 | ||||
| 13RS037580B | Essentra Components | ROUND SPACER, .265 ID, .375 OD | 0 | |||
| 3675800 | SHEREX FASTENING SO | 0 | ||||
| 3675800 | PennEngineering (PEM) | 0 | ||||
| 005758000002 | Essentra Components | 0 | ||||
![]() EBV Elektronik | C17580_STRADA-2X2-SHD-WHT | LEDIL | Backlight Control Shade for STRADA Family 2x2 LEDs Polycarbonate White (Alt: C17580_STRADA-2X2-SHD-WHT) RoHS : Compliant | 5,740 | ||
| ST7580 | STMicroelectronics | Power Line Networking SoC 48Pin VFQFPN EP Tray (Alt: ST7580) RoHS : Compliant | 0 | |||
| ST7580TR | STMicroelectronics | Power Line Networking Line DriverReceiver VFQFPN 48 Pin (Alt: ST7580TR) RoHS : Compliant | 0 | |||
| NJU77580F-TE1 | Nisshinbo Micro Devices | NJU77580F (Alt: NJU77580F-TE1) RoHS : Compliant | 0 | |||
| 99-616LM2C/L7580SG6/TR8-T/EU | Everlight Electronics Co Ltd | (Alt: S10C012916) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 2-747580-1 | TE Connectivity | Placeholder RoHS : Compliant | 98 | ||
| M10-538758-098 | Amphenol Aerospace | Connector 38999 |
| 39 | ||
| M10-538758-015 | Amphenol Aerospace | Connector 38999 | 24 | |||
| GMR7580-31P1BPN | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 3 | |||
| MR7580-9P2AR | Glenair Inc | Connector |
| 0 | ||
| MR7580-51S2BSU | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| MR7580-9S1ASU | Glenair Inc | Connector |
| 0 | ||
| MR7580-31S1BP | Glenair Inc | Connector |
| 0 | ||
| MR7580-15S1BSU | Glenair Inc | Connector |
| 0 | ||
| MR7580-51P1ASU | Glenair Inc | Connector |
| 0 | ||
| MR7580-25S1BSU | Glenair Inc | Connector |
| 0 | ||
| MR7580-9P1BP | Glenair Inc | Connector |
| 0 | ||
| MR7580-51S1AWU | Glenair Inc | Placeholder | 0 | |||
| MR7580-51S2BNU | Glenair Inc | Connector |
| 0 | ||
| MR7580-15P2AR | Glenair Inc | Connector |
| 0 | ||
![]() Flip Electronics | FDMS7580 | onsemi | Stock, Ship Today RoHS : Compliant | 779,540 | ||
| LC75805PES-3H | onsemi | Stock, Ship Today RoHS : Compliant | 702 | |||
| LC75808WS-E | onsemi | Stock, Ship Today RoHS : Compliant | 600 | |||
![]() Maritex | TLV75801PDRVR![]() | Texas Instruments | LDO Regulators; TLV75801PDRVR; TEXAS INSTRUMENTS; 6; 1; 500 mA RoHS : Compliant |
| 23,600 | |
| 10131758-004RLF | Amphenol Corporation | Edgeboard Connectors; 10131758-004RLF; AMPHENOL |
| 2,880 | ||
TPS75801KTTTG3![]() | Texas Instruments | LDO Regulators; TPS75801KTTTG3; TEXAS INSTRUMENTS; 5; 1; 3 A; 5 V RoHS : Compliant |
| 16 | ||
![]() Master Electronics | 7580K6 | Eaton Cutler-Hammer | Switch Toggle ON None OFF SPST Round Lever Solder Lug 6A 250VAC Panel Mount with Threads RoHS : Compliant |
| 31 | |
| SFSS-03-28-G-75.80-D-NUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-05-12-G-D-758-063 | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| RCV-00117580 | Carling Technologies | RoHS : Compliant |
| 0 | ||
| AAC0758-00 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 758-0018-17 | TE Connectivity | Standard Circular Connectors RoHS : Compliant |
| 0 | ||
| 758-0110-23 | TE Connectivity | Standard Circular Connectors RoHS : Compliant |
| 0 | ||
| D7580ZOV122RA1500 | Songtian Electronics (STE) | Metal Oxide Varistor - High Energy Series - 40mm - 1200VAC - 40000A Imax (01-0403) RoHS : Compliant |
| 0 | ||
| 1627580 | Phoenix Contact | RoHS : Compliant |
| 0 | ||
| 000437580 | ITT Interconnect Solutions | Connector | ITT Cannon CIR02R-40A-60PZ-F80-T12 RoHS : Not Compliant |
| 0 | ||
| 30758020 | TE Connectivity | 30758020 TE Connectivity / Hartman MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 3-1775801-5 | TE Connectivity | PCI EXPRESS 98P(3.1)(15 )BLACK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5-2176758-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 75758-0101 | Molex | Conn I-Pass RCP 52 POS 0.8mm Press Fit RA Thru-Hole 52 Terminal 1 Port iPass Tray RoHS : Compliant |
| 0 | ||
| TCMD-04-T-17.58-01-SR | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 7580K6 | Eaton Corporation | Toggle Switch,SPST,ON-NONE-OFF,General Purpose,6A,125VAC,3A,250VAC,Solder Term. RoHS : Compliant |
| 50 | |
| 157.5917.5801 | Littelfuse Inc | Specialty Fuses Fuse -Strip 60 9MM w/Housing 48VDC, 80A RoHS : Compliant |
| 50 | ||
| 1375800-6 | TE Connectivity | PCB Receptacle; IDC; 120-C; Press Fit; High Temp; 3A; AMPMODU PC/104-Plus Series RoHS : Compliant |
| 50 | ||
| 1227580 | Phoenix Contact | Ethernet Cables / Networking Cables NBC-R4OC/2,0-BC6A/R4OC RoHS : Compliant |
| 50 | ||
| 3077580000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories ZQV 6SL/2 RoHS : Compliant |
| 50 | ||
| DRS-DTH-75-80 | Littelfuse Inc | Magnetic / Reed Switches 75-80AT CO 500V 30W 39.7MM REED RoHS : Compliant |
| 50 | ||
| 1147580000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks SL 5.08HC/10/180B 3.2SN OR BX RoHS : Compliant |
| 50 | ||
| 2847580000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AL4C 2.5 FE RoHS : Compliant |
| 50 | ||
| 1957580000 | Weidmüller Interface GmbH & Co. KG | PWR DISTRIB BLOCK 1POS 30A 600V RoHS : Compliant |
| 50 | ||
| 7580K4 | Eaton Corporation | Toggle Switch,SPST,ON-NONE-OFF,General Purpose,6A,125VAC,3A,250VAC,Screw Term. RoHS : Compliant |
| 50 | ||
| 1787580000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 10B TSLU 1M25G RoHS : Compliant |
| 41 | ||
| 7758062 | RS Pro | Indoor Plug Socket 1 Gangs Type G - British 13 A 230 V ac White |
| 40 | ||
| 09482847758050 | HARTING Technology Group | Ethernet Cables / Networking Cables PP V4 RJ45 CBL ASSY CAT6A 5.0M RoHS : Compliant |
| 0 | ||
| AP7580 | APC by Schneider Electric | APC Basic Rack 4.992kVA PDU |
| 0 | ||
| 09482847758010 | HARTING Technology Group | Ethernet Cables / Networking Cables HARTING PushPull V4 v2.0 RJ45 Cat6a Overmolded Cable Assembly - PP RJ45 to IP20 RJ45, PVC outdoor black, 1.0m RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE37580 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50. SMA Male to TNC Male Cable Using RG141 Coax. PE37580 is a SMA male to TNC male cable using RG141 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37580 SMA male to TNC male cable assembly is constructed with RG141 coax and the maximum VSWR is 1.4:1. | 9,064 | ||
| PE37580-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to TNC Male Cable 48 Inch Length Using RG141 Coax., Radio frequency assembly SMA male to TNC male cable 48 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 48 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE37580-48, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE37580-48 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37580-48 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 48 inch length using RG141 coax. |
| 1,876 | ||
| PE37580-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to TNC Male Cable 12 Inch Length Using RG141 Coax., Radio frequency assembly SMA male to TNC male cable 12 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 12 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE37580-12, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE37580-12 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37580-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 12 inch length using RG141 coax. |
| 1,876 | ||
| PE37580-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to TNC Male Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly SMA male to TNC male cable 36 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 36 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE37580-36, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE37580-36 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37580-36 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 36 inch length using RG141 coax. |
| 1,876 | ||
| PE37580-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to TNC Male Cable 60 Inch Length Using RG141 Coax., Radio frequency assembly SMA male to TNC male cable 60 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 60 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE37580-60, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE37580-60 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37580-60 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 60 inch length using RG141 coax. |
| 1,560 | ||
| PE7580-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-40 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7580-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7580-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-6 fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7580-6 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 6 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE3W17580-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to N Female 4 Hole Flange Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-6 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-6 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-6 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 1 | ||
| PE3W17580LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to SMA Male Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W17580LF/HS is a N female 4 hole flange to SMA male cable using PE-SR402FLJ coax. This Pasternack N female 4 hole flange to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N 4 hole flange to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17580LF/HS N female 4 hole flange to SMA male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W17580-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female 4 Hole Flange Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-12 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-12 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-12 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE37580LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG141 Coax with HeatShrink, LF Solder. PE37580LF/HS is a SMA male to TNC male cable using RG141 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37580LF/HS SMA male to TNC male cable assembly is constructed with RG141 coax. | 0 | |||
| PE3W17580-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Female 4 Hole Flange Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 24 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-24 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-24 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-24 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17580-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to N Female 4 Hole Flange Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male to N female 4 hole flange cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N 4 hole flange cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W17580-18 can also be known as a SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17580-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to 4 hole flange type N female cable has a maximum VSWR of 1.4:1. SMA plug to type N jack cable assembly PE3W17580-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17580-18 can also be used in the other direction and will be a type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE37580LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG141 Coax, LF Solder. PE37580LF is a SMA male to TNC male cable using RG141 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37580LF SMA male to TNC male cable assembly is constructed with RG141 coax. | 0 | |||
| PE7580-50 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 50 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 50 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-50 is a 50 dB fixed attenuator from Pasternack. This 50 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-50 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 50 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 50 dB. The Pasternack PE7580-50 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 50 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-50 will ship the same business day as purchased from Pasternack’s production facility. This 50 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
![]() Sager | 1758050 | Phoenix Contact | Pluggable Terminal Blocks 6 Pos 5.08mm pitch Through Hole Header RoHS : Compliant |
| 89 | |
| HW-05-12-G-D-758-063 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| AAC0758-00 | TE Connectivity | TE Connectivity PC424HP-M-23-PA-1-ZN |
| 0 | ||
| 9758002032 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758002069 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758002113 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758003004 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758003086 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758003130 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758004021 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758004058 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758004102 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758004139 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758005075 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9758005156 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TE Connectivity | 1-5380758-0 | TE Connectivity | RCR SN-SPR SN-CUP 036-051 Socket Length: 6.65 mm Socket Length: .262 in PCB Hole Diameter: .089 in PCB Hole Diameter: 2.26 mm Socket Sleeve Style: Closed Bottom Pin Socket | 6.65 mm .262" .089" 2.26 mm | Part Number: 1-5380758-0 | Internal Number: 1-5380758-0 | TE Connectivity RoHS : Compliant |
| 44,309 | |
| 2475805-5 | TE Connectivity | MULTIPOINT IDC TERMINAL 5P PCB Connector Type: PCB Mount One-Piece IDC Connector PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 5 Centerline (Pitch): 2.98 mm PCB Mount One-Piece IDC Connector Right Angle Wire-to-Board 5 | Multi-Point Idc Terminal | Part Number: 2475805-5 | Internal Number: 2475805-5 | 2.98 mm | TE Connectivity RoHS : Compliant |
| 31,886 | ||
| 2475805-2 | TE Connectivity | MULTIPOINT IDC TERMINAL 2P PCB Connector Type: PCB Mount One-Piece IDC Connector PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 2 Centerline (Pitch): 2.98 mm PCB Mount One-Piece IDC Connector Right Angle Wire-to-Board 2 | Multi-Point Idc Terminal | Part Number: 2475805-2 | Internal Number: 2475805-2 | 2.98 mm | TE Connectivity RoHS : Compliant |
| 23,742 | ||
| 3-747580-1 | TE Connectivity | SHLDNG FERRULE, PLTD, BULK PKG Strain Relief Accessory Type: Ferrule Packaging Method: Bag Packaging Quantity: 100 Ferrule Bag 100 | Connector Strain Relief | Part Number: 3-747580-1 | Internal Number: 3-747580-1 | TE Connectivity RoHS : Compliant |
| 1,360 | ||
| 2-747580-2 | TE Connectivity | SHLDING FERRULE,PLTD TIN,BULK Strain Relief Accessory Type: Ferrule Packaging Method: Bag Packaging Quantity: 100 Ferrule Bag 100 | Connector Strain Relief | Part Number: 2-747580-2 | Internal Number: 2-747580-2 | TE Connectivity RoHS : Compliant |
| 512 | ||
| 2-747580-3 | TE Connectivity | SHLDING FERRULE,PLTD TIN,BULK Strain Relief Accessory Type: Ferrule Packaging Method: Bag Packaging Quantity: 100 Ferrule Bag 100 | Connector Strain Relief | Part Number: 2-747580-3 | Internal Number: 2-747580-3 | TE Connectivity RoHS : Compliant |
| 389 | ||
| 2227580-1 | TE Connectivity | 1X1 R/A ASSY, MINI SAS HD INTERNAL SAS Connector Type: Internal Mini-SAS HD Connector & Housing Type: Receptacle Connector System: Cable-to-Board Number of Positions: 36 Number of Rows: 4 Internal Mini-SAS HD Receptacle Cable-to-Board 36 | Sas & Mini-Sas Connector | Part Number: 2227580-1 | Internal Number: 2227580-1 | TE Connectivity RoHS : Compliant |
| 263 | ||
| 1375800-1 | TE Connectivity | ASSY, 120 POS PC104 PLUS Number of Positions: 120 Centerline (Pitch): .079 in Centerline (Pitch): 2 mm Number of Loaded Positions: 120 Contact Current Rating (Max): 3 A Pc/104 Connector | 120 .079" 2 mm | Part Number: 1375800-1 | Internal Number: 1375800-1 | .079" | TE Connectivity RoHS : Compliant |
| 159 | ||
![]() Teledyne HiRel | M38510/75802B2A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | ||
| 5962-8775801RA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9758001QEA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
5962-9758001QFA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
| M38510/75803B2A | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| M38510/75803BFA | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| 5962-8775801ZA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/75802BEA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| 5962-87758012A | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/75802BFA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| M38510/75803BEA | Teledyne HiRel | DECODER, DUAL 2-TO-4-LINE RoHS : Not Compliant | 0 | |||
| 5962-8775801SA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9758001Q2A![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
![]() Vyrian | MAX17580EVKIT | Analog Devices (Maxim Integrated) | 9,894 | |||
TPS75801KTTR![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.22V Min, 5V Max, 0.3V Dropout, PMOS, PSSO5 RoHS : Compliant | 8,871 | |||
AD7580KN![]() | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 2 Channel, Parallel, 8 Bits Access, CMOS, PDIP24 RoHS : Not Compliant | 8,848 | |||
| LC75806PTS-T-H | onsemi | Liquid Crystal Driver, 304-Segment, CMOS, PQFP100 RoHS : Compliant | 8,389 | |||
| 1758076 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,373 | |||
| PTLV75801PDBVR | Texas Instruments | Adjustable Positive LDO Regulator, 0.55V Min, 5.5V Max, PDSO5 RoHS : Compliant | 8,294 | |||
TPS75801KTTTG3![]() | Texas Instruments | Adjustable Positive LDO Regulator, 1.22V Min, 5V Max, 0.3V Dropout, PMOS, PSSO5 RoHS : Compliant | 7,859 | |||
5962-9758001Q2X![]() | Texas Instruments | J-Kbar Flip-Flop, F/FAST Series, 2-Func, Positive Edge Triggered, 2-Bit, Complementary Output, TTL, CQCC20 | 7,848 | |||
| MAX17580ATC+ | Analog Devices Inc | Switching Regulator RoHS : Compliant | 7,057 | |||
V62/04758-01XE![]() | Texas Instruments | Inverter, ACT Series, 6-Func, 1-Input, CMOS, PDSO14 RoHS : Compliant | 7,006 | |||
| 5962-8875801CA | Texas Instruments | 4,961 | ||||
| EVALKITST7580-1 | STMicroelectronics | 4,313 | ||||
| MR7580-9P2AR | Glenair Inc | D Microminiature Connector | 798 | |||
| GMR7580-9S1BNU | Glenair Inc | D Microminiature Connector, 9 Contact(s), Female, 0.075 inch Pitch, Solder Terminal, Locking RoHS : Not Compliant | 796 | |||
| MR7580-51S2BSU | Glenair Inc | D Microminiature Connector, 51 Contact(s), Female, 0.075 inch Pitch, Solder Terminal, #2-56 RoHS : Compliant | 609 | |||
![]() Win Source Electronics | TLV75801PDRVT![]() | Texas Instruments | IC REG LIN POS ADJ 500MA 6WSON RoHS : Compliant |
| 68,440 | |
TLV75801PDRVR![]() | Texas Instruments | IC REG LIN POS ADJ 500MA 6WSON / Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA 6-WSON (2x2) RoHS : Compliant |
| 65,360 | ||
TLV75801PDBVR![]() | Texas Instruments | IC REG LIN POS ADJ 500MA SOT23-5 RoHS : Compliant |
| 55,990 | ||
TLV75801PDBVT![]() | Texas Instruments | IC REG LIN POS ADJ 500MA SOT23-5 / Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA SOT-23-5 RoHS : Compliant |
| 54,360 | ||
| ST7580TR | STMicroelectronics | IC TXRX S-FSK PWR LINE 48VFQFPN RoHS : Compliant |
| 36,500 | ||
| FM17580-QNA-T-G | Shanghai Fudan Microelectronics Group Co Limited |
| 30,000 | |||
| 1758021 | Phoenix Contact | TERM BLOCK HDR 3POS VERT 5.08MM RoHS : Compliant |
| 10,000 | ||
| 78758-0002 | Molex | I/O Connectors SAS/PCIe Plug RA SMT 68Ckt RoHS : Compliant |
| 5,000 | ||
TPS75801KTTR![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 2,950 | ||
TPS75801KTTRG3![]() | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 2,670 | ||
| ST7580 | STMicroelectronics | IC TELECOM INTERFACE 48VFQFPN RoHS : Compliant |
| 1,560 | ||
| 1758018 | Phoenix Contact | TERM BLOCK HDR 2POS VERT 5.08MM RoHS : Compliant |
| 354 | ||
| 1758034 | Phoenix Contact | TERM BLOCK HDR 4POS VERT 5.08MM / 4 Position Terminal Block Header, Male Pins, Shrouded (2 Side) 0.200" (5.08mm) Vertical Through Hole RoHS : Compliant |
| 201 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |