| 数据搜索系统,热门电子元器件搜索 |
|
C9900-R231 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() TME | EC9901-000 | TE Connectivity | Marker: cable-heat shrinkable; 25mm; white; Shrinking ratio: 2: 1 RoHS : Compliant |
| 2,000 | |
CPC9909N![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8; 2mA RoHS : Compliant |
| 285 | ||
CPC9909NE![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP RoHS : Compliant |
| 116 | ||
| C99073-000 | TE Connectivity | PIN: 2 RoHS : Compliant |
| 1 | ||
| EVC990 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
| CC990 | TESTEC Elektronik GmbH | Probe: for oscilloscope; current; 1.5MHz; 600V; 0.23us; BNC plug |
| 0 | ||
| LTST-C990TBKT | Lite-On Semiconductor Corporation | LED; blue; SMD; 560÷1400mcd; 75°; 20mA; 525nm; Lens: transparent RoHS : Compliant |
| 0 | ||
| LTST-C990KRKT | Lite-On Semiconductor Corporation | LED; red; SMD; 0603; 180÷1120mcd; 75°; 25mA; Lens: transparent RoHS : Compliant |
| 0 | ||
CPC9909NETR![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8-EP RoHS : Compliant |
| 0 | ||
CPC9909NTR![]() | IXYS Corporation | IC: driver; AC/DC switcher,DC/DC switcher,LED driver; SO8 RoHS : Compliant |
| 0 | ||
| LTST-C990TGKT | Lite-On Semiconductor Corporation | LED; green; SMD; 0603; 75°; 525nm; round; No.of diodes: 1 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | TAZH685J035CBLC9900 | Kyocera AVX Components | CWR09/CWR11/CWR29 - Bulk (Alt: TAZH685J035CBLC9900) RoHS : Compliant | 0 | ||
| TAZF685K020CBLC9900 | Kyocera AVX Components | CWR09/CWR11/CWR29 - Bulk (Alt: TAZF685K020CBLC9900) RoHS : Compliant | 0 | |||
| LTST-C990NEKT-Q | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTST-C990NEKT-Q) RoHS : Compliant | 0 | |||
| RN60C9900FB14 | Vishay Intertechnologies | Through Hole Resistor, 990 ohm, RN Series, 125 mW, ? 1%, Axial Leaded, 300 V, Metal Film, ? 50ppm/?C - Bulk (Alt: RN60C9900FB14) RoHS : Not Compliant |
| 0 | ||
| LTE-C9904-P | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9904-P) RoHS : Compliant |
| 0 | ||
| LTST-C990TBKT | Lite-On Semiconductor Corporation | CHIP LED DOME LENS GREEN 525NM, SUPER BRIGHTNESS - Tape and Reel (Alt: LTST-C990TBKT) RoHS : Compliant |
| 0 | ||
| RN55C9901BRE7 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55C9901BRE7) RoHS : Not Compliant |
| 0 | ||
| RN55C9901BRE5 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55C9901BRE5) RoHS : Not Compliant |
| 0 | ||
| RN55C9903FRE7 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55C9903FRE7) RoHS : Not Compliant |
| 0 | ||
| LTE-C9908 | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9908) RoHS : Compliant |
| 0 | ||
| LTE-C9901 | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-C9901) RoHS : Compliant |
| 0 | ||
| MRS25000C9901FC100 | Vishay Intertechnologies | Resistor Professional Thin Film 9.9k Ohm 1% 3/5W ?50ppm/K Ceramic Axial T/R - Ammo Pack (Alt: MRS25000C9901FC100) RoHS : Not Compliant |
| 0 | ||
| LTST-C990KRKT | Lite-On Semiconductor Corporation | CHIP LED DOME LENS RED - Tape and Reel (Alt: LTST-C990KRKT) RoHS : Compliant |
| 0 | ||
| TAZH336K015CBLC9900 | Kyocera AVX Components | CWR09/CWR11/CWR29 - Bulk (Alt: TAZH336K015CBLC9900) RoHS : Compliant | 0 | |||
| RN55C9901BRE6 | Vishay Intertechnologies | Through Hole Resistor, 9.9 kohm, RN Series, 100 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Tape and Reel (Alt: RN55C9901BRE6) RoHS : Not Compliant |
| 0 | ||
![]() Newark | BTNKSC990 | C&K Switches | Cap Black Ksc9 Series; |C&k Components BTNKSC990 RoHS : Compliant |
| 6,600 | |
| CPC9909NETR | Littelfuse Inc | Led Driver, Dc/Dc, Buck, Boost, 120Khz; |Littelfuse CPC9909NETR RoHS : Compliant |
| 2,000 | ||
| CPC9909NETR | Littelfuse Inc | Led Driver, Dc/Dc, Buck, Boost, 120Khz; |Littelfuse CPC9909NETR RoHS : Compliant |
| 2,000 | ||
| CPC9909NE | Littelfuse Inc | Led Driver, Boost/Buck, 120Khz, Soic-8Ep; |Littelfuse CPC9909NE RoHS : Compliant |
| 864 | ||
| EC-9904-BT | BUD Industries Inc | Case 19", 6.0, Steel, Portable; |Bud Industries EC-9904-BT RoHS : Compliant |
| 5 | ||
| EC-9906-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 8U, Steel; |Bud Industries EC-9906-BT RoHS : Compliant |
| 4 | ||
| EC-9905-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 7U, Steel; |Bud Industries EC-9905-BT RoHS : Compliant |
| 2 | ||
| EC-9902-S | BUD Industries Inc | 19" Case, Cabinet, Sand, 4U, Steel; |Bud Industries EC-9902-S RoHS : Compliant |
| 1 | ||
| EC-9902-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 4U, Steel; |Bud Industries EC-9902-BT RoHS : Compliant |
| 1 | ||
| VC9902 | Thomas & Betts | Clear Primer - Quart 31377; |Abb Thomas & Betts VC9902 RoHS : Not Compliant |
| 0 | ||
| EC-9903-S | BUD Industries Inc | 19" Case, Cabinet, Sand, 5U, Steel; |Bud Industries EC-9903-S RoHS : Compliant |
| 0 | ||
| C99073-000 | TE Connectivity | D-500-L456-1-613-240; |Te Connectivity Raychem C99073-000 RoHS : Not Compliant |
| 0 | ||
| EC9901-000 | TE Connectivity | Wire Labels & Markers Zhd-Sce-1K-9.5-50-; |Te Connectivity Raychem EC9901-000 RoHS : Not Compliant |
| 0 | ||
| EC-9903-BT | BUD Industries Inc | 19" Case, Cabinet, Black, 5U, Steel; |Bud Industries EC-9903-BT RoHS : Compliant |
| 0 | ||
| 33-HC990EXF-28-00-0500 | Calian | Antenna, 1.559Ghz-1.606Ghz, 28Db; |Calian 33-HC990EXF-28-00-0500 RoHS : Compliant |
| 0 | ||
![]() RS | EC-9906-BT | BUD Industries Inc | RACK, CABINET,19 IN,8U/14 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 1 | |
| EC-9902-BT | BUD Industries Inc | RACK, CABINET,19 IN,4U/7 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 1 | ||
| EC-9904-BT | BUD Industries Inc | RACK, CABINET,19 IN,6U/10.5 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES RoHS : Compliant |
| 1 | ||
| VC9903 | ABB Group | PINT SIZE CLEAR PRIMER WITH DAUBER APPLICATOR |
| 0 | ||
| VC9902 | ABB Group | ELECTRICAL SEALING COMPOUND, 32 OZ, CEMENTS, PRIMER, ADHESIVE, DAUBER APPLICATOR |
| 0 | ||
| EC-9903-S | BUD Industries Inc | RACK, CABINET,19 IN,5U/8.75 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| BPACC9900 | Brother International | SHOULDER CARRYING CASE FOR PTE920BT |
| 0 | ||
| CPC9909NE | Littelfuse Inc | OFF-LINE HI BRGHTNSS LED DRVR EXPOSD PAD RoHS : Compliant |
| 0 | ||
| EC-9902-S | BUD Industries Inc | RACK, CABINET,19 IN,4U/7 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| EC-9905-S | BUD Industries Inc | RACK, CABINET,19 IN,7U/12.25 IN,14.5 IN DEPTH, SAND,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| EC9901-000 | TE Connectivity | THERMOFIT, PRINTABLE LOW FIRE HAZARD,2:1,WHITE,0.375,ZHD-SCE-1K-9.5-50-S1-9 RoHS : Compliant |
| 0 | ||
| EC9902-000 | TE Connectivity | RAYCHEM;WIRE IDENTIFICATION 12.7MM DIA 50MM LENGTH WHITE;EC9902-000 RoHS : Compliant |
| 0 | ||
| EC9904-000 | TE Connectivity | RAYCHEM;WIRE IDENTIFICATION 19.0MM DIA 50MM LENGTH WHITE;EC9904-000 RoHS : Compliant |
| 0 | ||
| EC-9903-BT | BUD Industries Inc | RACK, CABINET,19 IN,5U/8.75 IN,14.5 IN DEPTH, BLACK,500LB WT-CAP, CLASSIC II SERIES |
| 0 | ||
| EC9900-000 | TE Connectivity | RAYCHEM;WIRE IDENTIFICATION 9.5MM DIA 50MM LENGTH WHITE;EC9900-000 RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | GC9901-00 | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
| GC9900-00 | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9902-UC | Microchip Technology Inc | Si Schottky Non Hermetic Chip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9902-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9902-17SP | Microchip Technology Inc | Si TVAR Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-127B | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| GC9902-128A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 RoHS : Compliant |
| 0 | ||
| GC9901-127C | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| GC9901-QR1-CLA | Microchip Technology Inc | Si Schottky Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC9901-127B-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9903-127C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9902-174C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9901-174C-QR1 | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| GC9902-127B-TSR | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Sager | C99073-000 | TE Connectivity | Data Bus Components - Microcouplers D-500-L456-1-613-240 RoHS : Compliant |
| 0 | |
| EC9909-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-5K-2.4-50-S1-9 RoHS : Compliant | 0 | |||
| EC9901-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-9.5-50-S1-9 RoHS : Compliant | 0 | |||
| VC9903 | ABB Group | CL VC9903 CLEAR PRIMER - PINT 31376 |
| 0 | ||
| EC-9903-S | BUD Industries Inc | COMMUNICATIONS CABINET SAND (10.8 X 21.1 X 15.5 IN) |
| 0 | ||
| VC9902 | ABB Group | CL VC9902 CLEAR PRIMER - QUART 3137 |
| 0 | ||
| 060-C990-09 | HONEYWELL TEST AND MEASUREMENT | Industrial Pressure Sensors | 0 | |||
| EC9902-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-12.7-50-9 RoHS : Compliant | 0 | |||
| EC9907-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-25.4-50-S1-9 RoHS : Compliant | 0 | |||
| C9904 | TE Connectivity | TE Connectivity | 0 | |||
| EC-9902-S | BUD Industries Inc | COMMUNICATIONS CABINET SAND (9.1 X 21.1 X 15.5 IN) |
| 0 | ||
| EC9904-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-19.0-50-9 RoHS : Compliant | 0 | |||
| EC-9903-BT | BUD Industries Inc | COMMUNICATIONS CABINET BLACK (10.8 X 21.1 X 15.5 IN) |
| 0 | ||
| EC-9906-BT | BUD Industries Inc | COMMUNICATIONS CABINET BLACK (16.1 X 21.1 X 15.5 IN) |
| 0 | ||
| EC9900-000 | TE Connectivity | Wire Labels & Markers ZHD-SCE-1K-9.5-50-9 RoHS : Compliant | 0 | |||
![]() Interstate Connecting Components | 10C9900973 | Brady Worldwide Inc | 0468-0113-0000,REV.00 |
| 1,250 | |
| EC9907-000 | TE Connectivity | ZHD-SCE-1K-25.4-50-S1-9 RoHS : Compliant | 0 | |||
| EC9903-000 | TE Connectivity | ZHD-SCE-1K-12.7-50-S1-9 RoHS : Compliant | 0 | |||
| EC9905-000 | TE Connectivity | ZHD-SCE-1K-19.0-50-S1-9 RoHS : Compliant | 0 | |||
![]() Powell Electronics | EC9901-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 1,320 | |
| EC9905-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 660 | ||
| C99073-000 | TE Connectivity | Data Bus Components RoHS : Compliant |
| 1 | ||
![]() Chip 1 Exchange | MC990001A09 | INSTOCK | 1 | |||
![]() Avnet Abacus | C99073-000 | TE Connectivity | (Alt: C99073-000) RoHS : Compliant | 0 | ||
![]() Braemac Americas-Symmetry | 33-HC990EXF-28-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 28dB, SMA straight male connector, 1500mm cable |
| 0 | |
| 33-HC990XF-28 | Calian | HC990XF Extended-Filter Full-Band GNSS Low-Profile Helical Antenna + L-Band, 28dB |
| 0 | ||
| 33-HC990EXF-35-00-0150 | Calian | Internal p/n 110-0342-A |
| 0 | ||
| HC990EXF-35-05-0361 | Calian | Embedded, Full GNSS Spectrum + L-band with eXtended Filtering, 35dB active gain, MCX R/A Male/Plug, 361mm cable length |
| 0 | ||
| 33-HC990EXF-35-05-0361 | Calian |
| 0 | |||
| 33-HC990EXF-35-00-0190 | Calian |
| 0 | |||
| 33-HC990EXF-35-00-1500 | Calian | HC990EXF Extended-Filter Embedded Full GNSS Helical Antenna + L-Band, 35dB, SMA straight male connector, 1500mm cable |
| 0 | ||
![]() Master Electronics | CPC9909NE | Littelfuse Inc | Led Driver Boost/Buck 120Khz Soic-8Ep Rohs Compliant: Yes |Littelfuse CPC9909NE RoHS : Compliant |
| 1,500 | |
| 10C9900750 | Brady Worldwide Inc | RoHS : Compliant |
| 746 | ||
| EC-9903-BT | BUD Industries Inc | Cabinet Rack - Doorless - Non-Vented - 5U - 15.500 L x 21.060 W x 10.810 H (393.70mm x 534.92mm x 284.57mm) Overall Dimensions - Steel - Black Textured. RoHS : Compliant |
| 1 | ||
| C99073-000 | TE Connectivity | D-500-L456-1-613-240 RoHS : Compliant |
| 0 | ||
| GC9902-17SP | Microchip Technology Inc | RoHS : Compliant |
| 0 | ||
| EC9909-000 | TE Connectivity | ZHD-SCE-5K-2.4-50-S1-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9901-000 | TE Connectivity | ZHD-SCE-1K-9.5-50-S1-9 RoHS : Compliant |
| 0 | ||
| VC9903 | Thomas & Betts | CLEAR PRIMER - PINT 31376 RoHS : Compliant |
| 0 | ||
| VC9902 | Thomas & Betts | CLEAR PRIMER - QUART 31377 RoHS : Compliant |
| 0 | ||
| EC9902-000 | TE Connectivity | ZHD-SCE-1K-12.7-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9907-000 | TE Connectivity | ZHD-SCE-1K-25.4-50-S1-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| GC9902-128A | Microchip Technology Inc | Si Schottky Non Hermetic Microstrip RoHS : Compliant |
| 0 | ||
| EC9904-000 | TE Connectivity | ZHD-SCE-1K-19.0-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC9900-000 | TE Connectivity | ZHD-SCE-1K-9.5-50-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| EC-9904-BT | BUD Industries Inc | Cabinet Rack - Doorless - Non-Vented - 6U - 15.500 L x 21.060 W x 12.560 H (393.70mm x 534.92mm x 319.02mm) Overall Dimensions - Steel - Black Textured. RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9905 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 7,353 | ||
| PE3C9905-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 12 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 12 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-12 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-12 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-12 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,745 | ||
| PE3C9905-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to TNC Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-195-UF Coax., Radio frequency assembly TNC male right angle to TNC female bulkhead low loss cable 24 inch length using LMR-195-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female bulkhead low loss cable 24 inch length using LMR-195-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss right angle TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C9905-24 can also be known as a low loss right angle TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9905-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle TNC male to bulkhead TNC female cable has a maximum VSWR of 1.35:1. TNC plug to TNC jack cable assembly PE3C9905-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9905-24 can also be used in the other direction and will be a TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,745 | ||
| PE3C9904-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 36 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 36 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-36 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-36 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9904-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-48 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9904-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-24 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 41 | ||
| PE3C9908/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to Trimmed Lead Cable Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. | 30 | |||
| PE3C9904-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9904-60 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9904-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9904-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9904-60 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 29 | ||
| PE3C9908/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to Trimmed Lead Cable 12 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 12 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 12 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-12 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-12 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-12 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-12 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. |
| 6 | ||
| PE3C9908/HS-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. BNC Female Bulkhead to Trimmed Lead Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to trimmed lead cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to trimmed lead cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to trimmed lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a trimmed lead cable connection on the other. Our BNC to trimmed lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9908/HS-9 can also be known as a BNC jack to trimmed lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9908/HS-9 RF cable has a FEP jacket of 0.072-inch diameter. The flexible RF cable has a between series connection. BNC jack to trimmed lead sexless cable assembly PE3C9908/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to trimmed lead cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9908/HS-9 can also be used in the other direction and will be a trimmed lead sexless to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to trimmed lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to trimmed lead cable assembly for quick shipment worldwide. Variations of BNC and trimmed lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to Trimmed Lead RF cable assembly as per your requirements. |
| 6 | ||
| PE3C9909 | Pasternack Enterprises | 0 | ||||
| PE3C9900 | Pasternack Enterprises | 0 | ||||
| PE3C9901/HS | Pasternack Enterprises | 0 | ||||
| PE3C9905/HS | Pasternack Enterprises | 0 | ||||
| PE3C9906 | Pasternack Enterprises | 0 | ||||
![]() Vyrian | GC9902-17SP | Microchip Technology Inc | Mixer Diode, Low Barrier, X Band, Silicon RoHS : Compliant | 2,900 | ||
| P60D080PU15/9C990V | NXP Semiconductors | 950 | ||||
CPC9909NTR![]() | IXYS Corporation | RoHS : Compliant | 620 | |||
CPC9909N![]() | IXYS Corporation | RoHS : Compliant | 380 | |||
| HMC990LP4E | Analog Devices Inc | Down Converter RoHS : Compliant | 3 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |