EW12-R Price, 销售商, Stock

Key Specifications. Minimum Frequency 60 GHz Maximum Frequency 90 GHz Typical Attenuation Value, Min 0 dB Typical Attenuation Value, Max 30 dB Insertion Loss 0.4 dB Maximum Input Power 2 Watt VSWR 1.15:1. WR-12 Waveguide Continuously Variable Attenuator, 0 to 30 dB, from 60 GHz to 90 GHz, UG-387/U Round Cover Flange, Dial., Pasternack’s Continuously Variable Waveguide Attenuators are offered for the frequency range of 18 to 110 GHz in different waveguide bands. The attenuation value of the Continuously Variable attenuators are from 0 to 30 dB with full waveguide operational bandwidth. The Continuously Variable attenuators are equipped with a micrometer, which enables rapid re-setting. With calibrated charts, attenuators can be used as direct reading attenuator for bench top test set use. The level setting attenuators are typically used in the test setups and prototype assemblies where certain attenuation is required.

1 : $2,800.0
5 : $2,688.0
10 : $2,576.0
25 : $2,464.0

PE-W12CP003A-20

Pasternack Enterprises

Key Specifications. Waveguide Size WR-12 Flange Size UG-387/U Flange Flange Type Round Cover Flange Flange Group Standard Minimum Frequency 60 GHz Maximum Frequency 90 GHz Impedance 50 Ohms Coupling 20 dB. WR-12 Waveguide 20 dB Broadwall Coupler, UG-387/U Round Cover Flange, E-Plane Coupled Port, 60 GHz to 90 GHz, Copper Gold., Pasternack’s PE-W12CP003A-20 is a WR-12 directional broadwall waveguide coupler with a 50 Ohm impedance. Our waveguide coupler operates over a frequency range between 60 GHz and 90 GHz. This waveguide broadwall coupler is designed with an E-plane coupled port and has a coupling accuracy of 20 dB. The PE-W12CP003A-20 broadwall waveguide coupler from Pasternack is designed with a coupling value of 20 dB. This 20 dB waveguide coupler has a copper body with gold plating. Additional dimensions and specifications for this WR-12 waveguide coupler are on our downloadable PDF datasheet above. The PE-W12CP003A-20 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. This waveguide coupler has a UG-387/U round cover flange which is made up of copper material with gold plating. This WR-12 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional broadwall waveguide coupler for your requirement.

1 : $2,860.0
5 : $2,745.6
10 : $2,631.2
25 : $2,516.8

PE-W12CA001

Pasternack Enterprises

1 : $7,810.0
5 : $7,497.6
10 : $7,185.2

PE-W12CP011-20

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-12, Flange Size: UG-387/U Flange, Flange Type : Round Cover Flange, Flange Group : Standard, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz, Maximum VSWR: 1.25:1, Maximum Insertion Loss: 0.7 dB, Coupling: 20 dB. WR-12 Waveguide 20 dB Broadwall Coupler, UG-387/U Round Cover Flange, H-Plane Coupled Port, 60 GHz to 90 GHz, Brass Copper., Pasternack’s PE-W12CP011-20 is a WR-12 directional broadwall waveguide coupler. Our waveguide coupler operates over a frequency range between 60 GHz and 90 GHz. This waveguide broadwall coupler is designed with an H-plane coupled port and has a coupling accuracy of 20 dB. This 20 dB waveguide coupler has a brass copper body with gold plating. Our WR-12 directional waveguide coupler is rated for a maximum input power (CW) of 15 Watts. This 90 GHz waveguide coupler has a 1.15:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this 3-port WR-12 waveguide coupler are on our downloadable PDF datasheet above. The PE-W12CP011-20 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our waveguide coupler has a maximum insertion loss of 0.7 dB. This waveguide coupler has a UG-387/U round cover flange, which is made up of brass copper material with a gold plating. The waveguide coupler with a UG-387/U round cover flange has a minimum coupler directivity of 25 dB. This WR-12 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same-business-day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal 3-port directional broadwall waveguide coupler for your requirement.

1 : $3,280.0
5 : $3,214.4
10 : $3,148.8
25 : $3,083.2

PE-W12PS1001

Pasternack Enterprises

1 : $2,460.0
5 : $2,361.6
10 : $2,263.2

PE-W12TS15001

Pasternack Enterprises

1 : $2,110.0
5 : $2,025.6
10 : $1,941.2

PE-W12IR002

Pasternack Enterprises

Key Specifications. Minimum Frequency: 76 GHz Maximum Frequency: 78 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Forward Power (Peak): 20 Watts Reverse Power (CW)(Max): 0.2 Watts Reverse Power (Peak): 2 Watts. WR-12 Waveguide Isolator from 76 GHz to 78 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12IR002 is a Waveguide Isolator offering 15 dB minimum isolation over the E band frequency range of 76 to 78 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U Cover compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of isolators and waveguide isolators to fit your needs. These are two-port devices that transmit microwave or radio frequency power in one direction only and block the signal in the opposite direction. They can be thought of as a diode for RF energy. Isolators are used to isolate equipment from the effects of conditions outside of the equipment. For instance they are used to prevent a microwave source being detuned by a mismatched load. Pasternack's waveguide isolators feature excellent insertion loss, full WR band high isolation and reliability.

1 : $3,590.0
5 : $3,446.4
10 : $3,302.8
25 : $3,159.2

PE-W12IR001

Pasternack Enterprises

Key Specifications. Minimum Frequency: 64.5 GHz Maximum Frequency: 66.5 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Forward Power (Peak): 20 Watts Reverse Power (CW)(Max): 0.2 Watts Reverse Power (Peak): 2 Watts. WR-12 Waveguide Isolator from 64.5 GHz to 66.5 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12IR001 is a Waveguide Isolator offering 15 dB minimum isolation over the E band frequency range of 64.5 to 66.5 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U Cover compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of isolators and waveguide isolators to fit your needs. These are two-port devices that transmit microwave or radio frequency power in one direction only and block the signal in the opposite direction. They can be thought of as a diode for RF energy. Isolators are used to isolate equipment from the effects of conditions outside of the equipment. For instance they are used to prevent a microwave source being detuned by a mismatched load. Pasternack's waveguide isolators feature excellent insertion loss, full WR band high isolation and reliability.

1 : $3,590.0
5 : $3,446.4
10 : $3,302.8
25 : $3,159.2

PEW12S001-2

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-12, Flange Size 1: UG-387/U, Waveguide Size 2: WR-12, Flange Size 2: UG-387/U, Length: 2 inches, Frequency, Min: 60 GHz, Frequency, Max: 90 GHz, Flange Type 1: UG Cover, Flange Type 2: UG Cover. WR-12 Straight Waveguide Section 2 Inch Length, UG-387/U Round Cover Flange from 60 GHz to 90 GHz. Pasternack's PEW12S001-2 is a 2-inch WR-12 straight waveguide section that operates from 60 GHz to 90 GHz. This straight waveguide section offers a maximum 1.1:1 VSWR. The input and output of this straight waveguide section are UG cover. PEW12S001-2 is part of over 40,000 RF, microwave and millimeter wave components. The WR-12 straight waveguide section will ship worldwide the same day it is purchased along with our other RF components. Our straight waveguide section has waveguide sizes of WR-12 on both sides. This WR-12 waveguide section has UG-387/U flanges on both sides. This WR-12 waveguide section is made of brass waveguide material. Make your online purchase right now to take advantage of our same-day shipping. Our straight waveguide section has a typical insertion loss of 0.3 dB. This waveguide section has UG cover made of brass for its input and output. The PEW12S001-2 straight waveguide section is suitable for transmission systems, test and laboratory setups, VNA calibration applications. Additional dimensions and specifications for this WR-12 straight waveguide section are in our downloadable PDF datasheet. Our RF, microwave and millimeter wave products maintain a 99.4% availability and are part of the broadest selection in the industry. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality WR-12 straight waveguide section that meets your requirements.

1 : $469.99
10 : $460.59
25 : $451.19
100 : $441.79

PE-W12S001-6

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-12, Flange Size 1: UG-387/U, Waveguide Size 2: WR-12, Flange Size 2: UG-387/U, Length: 6 inches, Frequency, Min: 60 GHz, Frequency, Max: 90 GHz. WR-12 Instrumentation Grade Straight Waveguide Section 6 Inch Length with UG-387/U Flange Operating from 60 GHz to 90 GHz. PE-W12S001-6 WR-12 waveguide section is straight and is 6 inches long. This 6 inch WR-12 straight waveguide section from Pasternack is instrumentation grade and has a UG-387/U flange. Our straight WR-12 waveguide section with UG-387/U flange has a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. WR-12 waveguide section PE-W12S001-6 is part of over 40,000 RF, microwave and millimeter wave components. Our instrumentation grade WR-12 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $467.99
10 : $449.27
25 : $430.55

PEW12TW001

Pasternack Enterprises

1 : $333.99
10 : $320.63
25 : $307.27
100 : $293.91

PE-W12CA001A

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-12, Coax Connector Impedance: 50 Ohm, Coax Connector Series: 1.0mm, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 60 GHz, Maximum Frequency: 90 GHz. WR-12 UG-387/U Round Cover Flange to 1.0mm Female Waveguide to Coax Adapter Operating from 60 GHz to 90 GHz. The PE-W12CA001A WR-12 waveguide to coax adapter is also known as a WR-12 waveguide transition. This Pasternack waveguide to coax adapter/transition is constructed as a WR-12 to 1.0mm connector and a female gender. Our WR-12 to 1.0mm female waveguide adapter transition has a right angle design and has a round cover flange. Our right angle WR-12 to 1.0mm waveguide to coaxial cable transition/adapter has a minimum frequency of 60 GHz and a maximum frequency of 90 GHz. This PE-W12CA001A transition adapter for coax from Pasternack is designed with a waveguide material of aluminum and has gold plating. The right angle waveguide adapter transition has a typical VSWR of 1.4:1 and a typical insertion loss of 1 dB. Our WR-12 to 1.0mm female waveguide to coax adapter is manufactured to precise radio frequency industry specs, and you can find more waveguide adapter/transition datasheet specifications above. Our WR-12 to 1.0mm waveguide to coax adapter operates at temperatures ranging from -15 deg C to 60 deg C. This WR-12 waveguide to 1.0mm transition adapter to coax PE-W12CA001A is part of our RF, microwave and millimeter wave components available from Pasternack. Our WR-12 waveguide adapter transition with a 1.0mm interface can ship worldwide the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and trained sales team can get you the ideal WR-12 waveguide to coax adapter as per your requirements.

1 : $4,400.0
5 : $4,224.0
10 : $4,048.0
25 : $3,872.0