FBK.. Price, 销售商, Stock

1 : $191.289
5 : $191.289
10 : $165.538
25 : $141.115
50 : $141.115
100 : $136.635
250 : $132.431
500 : $128.478
1,000 : $124.754
2,500 : $122.971
10,000 : $122.971

AML32FBK4AD

Honeywell Sensing and Control

Switches
RoHS : Compliant

1 : $244.356
5 : $244.356
10 : $211.462
25 : $180.262
50 : $180.262
100 : $174.54
250 : $169.169
500 : $164.119
1,000 : $159.362
2,500 : $157.086
10,000 : $157.086

AML32FBK4AC

Honeywell Sensing and Control

Switches
RoHS : Compliant

1 : $197.533
5 : $197.533
10 : $170.942
25 : $145.721
50 : $145.721
100 : $141.095
250 : $136.754
500 : $132.672
1,000 : $128.826
2,500 : $126.986
10,000 : $126.986

Master Electronics

IO-XLR3-F-BK

Io Audio Technologies

Professional 3 Pin Xlr Connector Female
RoHS : Compliant

5,000 : $1.95
2,500 : $2.0
1,000 : $2.06
500 : $2.29
250 : $2.34
50 : $2.45
10 : $2.57

279

E34VFBK1-1X

Eaton Cutler-Hammer

SEL SW 2P MA BK KNB C1 1NO 1NC | Eaton - Cutler Hammer E34VFBK1-1X
RoHS : Compliant

100 : $164.13
50 : $164.71
20 : $166.44
10 : $167.75
5 : $169.06
1 : $172.1

AXL-F-BK-PN-TPS

Phoenix Contact

Axioline F bus coupler for PROFINET (including bus base module and connector)
RoHS : Compliant

5 : $420.76
1 : $442.91

LFBKP1005TS121-T

TAIYO YUDEN

Ferrite Beads Multi-Layer Power 120Ohm 25% 100MHz 1.3A 91mOhm DCR 0402 T/R
RoHS : Compliant

50,000 : $0.0078
10,000 : $0.0329
1 : $0.0362

C2T2436VFBK1

Hammond Manufacturing

rack - top
RoHS : Compliant

100 : $78.95
50 : $80.0
20 : $82.19
10 : $86.96
5 : $89.55
1 : $96.77

MSTBV-2-5-HC/-3-GF-BK

Phoenix Contact

MSTBV 2 5 HC/ 3-GF BK
RoHS : Compliant

7,500 : $2.57
5,000 : $2.58
2,500 : $2.61
1,000 : $2.7
500 : $2.71
250 : $2.79
100 : $3.07
50 : $3.08

RL6115-FBK

Hammond Manufacturing

Black Acrylonitrile Butadiene Styrene Flange Mount Project Enclosure
RoHS : Compliant

5,000 : $2.88
2,500 : $2.92
1,000 : $3.07
500 : $3.08
250 : $3.26
100 : $3.51
50 : $3.52
10 : $4.33

RL6465-FBK

Hammond Manufacturing

Black Acrylonitrile Butadiene Styrene Flange Mount Project Enclosure
RoHS : Compliant

1,000 : $7.74
500 : $7.84
250 : $8.05
100 : $8.52
50 : $8.78
25 : $9.19
5 : $10.14

ELJ-QF6N8JF/BKN

Panasonic Electronic Components

Resistor |Panasonic ELJ-QF6N8JF/BKN
RoHS : Compliant

100,000 : $0.1275
50,000 : $0.1329
25,000 : $0.1382
7,500 : $0.1537
5,000 : $0.156
2,500 : $0.1582
450 : $0.1731

IO-XLR3-F-BKAU

Io Audio Technologies

Professional 3 Pin Xlr Connector Female Gold Pins
RoHS : Compliant

5,000 : $2.57
2,500 : $2.64
1,000 : $2.71
500 : $2.96
250 : $3.13
100 : $3.37
50 : $3.38
10 : $4.15

HCADVB24HHWH1STM32MFBK

Phoenix Contact

Sleeve housing B24 - Screw locking - material: Die-cast aluminum - salt water resistant - cable outlets: 1 - lateral - height: 93.7 mm - cable gland: none - support sleeve: no - 1x M32 - Increased environmental requirements
RoHS : Compliant

5 : $48.09
1 : $50.62

MC-1-5-GF-BK-W/SPACER-KIT

Phoenix Contact

MC 1 5-GF-BK W/SPACER KIT
RoHS : Compliant

100 : $10.58
75 : $10.79
50 : $11.56
25 : $15.42

1550Z104FBK

Hammond Manufacturing

1550Z BK WITH FLANGED BASE
RoHS : Compliant

250 : $16.8
100 : $17.26
50 : $18.26
25 : $18.81
10 : $19.38
5 : $20.32
1 : $21.72

1590B3FBK

Hammond Manufacturing

Diecast Aluminum Enclosure - Black - 116x77x37.5 mm - IP54 - Flanged Bottom Plate
RoHS : Compliant

250 : $19.01
100 : $19.53
50 : $20.67
25 : $21.28
10 : $21.94
5 : $23.0
1 : $24.59

1590WBXFBK

Hammond Manufacturing

Water Tight Diecast Aluminum Enclosure - Black - 254x70x49.5 mm - IP65 - Flanged Bottom Plate
RoHS : Compliant

250 : $34.03
100 : $34.48
50 : $35.42
25 : $37.48
10 : $38.6
5 : $39.78
1 : $44.59

Neutron USA

DVIVGAMFBK

StarTech

StarTech.com DVI to VGA Cable Adapter - Black - M/F

1 : $6.99

134

1590WJFBK

Hammond Manufacturing

Miniature Cases - Industrial Diecast Alum Flanged
RoHS : Compliant

1 : $79.99

1590WAFBK

Hammond Manufacturing

Enclosures, Boxes, & Cases, Diecast Alum Flanged 3.64x1.2x1.52" Black
RoHS : Compliant

1 : $41.45

1550Z106FBK

Hammond Manufacturing

Enclosures, Boxes, & Cases 1550Z BK WITH FLANGED BASE
RoHS : Compliant

1 : $64.99

1550Z117FBK

Hammond Manufacturing

Enclosures, Boxes, & Cases 1550Z BK WITH FLANGED BASE
RoHS : Compliant

1 : $104.99

1550FBK

Hammond Manufacturing

Enclosures, Boxes, & Cases Diecast Aluminum Box
RoHS : Compliant

1 : $69.99

1590WDFBK

Hammond Manufacturing

Enclosures, Boxes, & Cases Diecast Alum Flanged 7.38x2.05x4.7" Black
RoHS : Compliant

1 : $94.99

1550Z113FBK

Hammond Manufacturing

Enclosures, Boxes, & Cases 1550Z BK WITH FLANGED BASE
RoHS : Compliant

1 : $74.99

1590BBSFBK

Hammond Manufacturing

Enclosures, Boxes, & Cases Diecast Alum wFlange 4.7x1.5x3.7" Black
RoHS : Compliant

1 : $69.44

1455JFBK

Hammond Manufacturing

Enclosures, Boxes, & Cases Black Flange Kit Black
RoHS : Compliant

1 : $36.87

IO-XLR3-F-BK

Orion Fans

XLR Connectors Io Audio Technologies, Professional 3-Pin XLR Plug, Female, Silver

1 : $63.13

FA4515F-BK

Black Box Corporation

MODULAR ADAPTER KIT DB15F TO RJ45F W/ THUMBSCREWS BLACK
RoHS : Compliant

1 : $29.99

IO-XLR5-F-BK-JL

Orion Fans

XLR Connectors Io Audio Technologies, 5 Pin XLR Female Receptacle, Black Metal Housing, Solder Cups, Silver Contacts

1 : $97.55

FA4525F-BK

Black Box Corporation

BLACK MODULAR ADAPTER KIT DB25 FEMALE TO RJ45 FEMALE
RoHS : Compliant

1 : $29.99

LM5160DNTFBKEVM

Bias Power Inc

Power Management IC Development Tools Fly-Buck Isolated Bi as Supply Eval Brd

1 : $114.99

Pasternack Enterprises US

PE3C10791LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to Water Blue FAKRA Jack Right Angle Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3C10791LF/BK/HS right angle MCX plug to right angle FAKRA jack RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a right angle FAKRA cable connection on the other. Our MCX to FAKRA cable assembly has a plug gender on end 1 and a jack on end 2. PE3C10791LF/BK/HS can also be known as a right angle MCX male to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10791LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MCX plug to right angle FAKRA jack cable has a maximum VSWR of 1.4:1. This PE3C10791LF/BK/HS MCX male to FAKRA female cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10791LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to right angle MCX plug cable assembly if the opposite connectivity is required. This MCX right angle male to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to FAKRA cable assembly for quick shipment worldwide. Variations of MCX and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to FAKRA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W05120LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to Blue FAKRA Jack Right Angle Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3W05120LF/BK/HS right angle MCX plug to right angle FAKRA jack RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a right angle FAKRA cable connection on the other. Our MCX to FAKRA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W05120LF/BK/HS can also be known as a right angle MCX male to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05120LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MCX plug to right angle FAKRA jack cable has a maximum VSWR of 1.4:1. This PE3W05120LF/BK/HS MCX male to FAKRA female cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05120LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to right angle MCX plug cable assembly if the opposite connectivity is required. This MCX right angle male to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to FAKRA cable assembly for quick shipment worldwide. Variations of MCX and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to FAKRA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W14583LF/BK

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to FAKRA Plug Cable Using LMR-100A-UF Coax., Pasternack’s PE3W14583LF/BK FAKRA jack to FAKRA plug RF cable assembly using LMR-100A-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to FAKRA plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a FAKRA cable connection on one end and a FAKRA cable connection on the other. Our FAKRA to FAKRA cable assembly has a jack gender on end 1 and a plug on end 2. PE3W14583LF/BK can also be known as a FAKRA female to FAKRA male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14583LF/BK RF cable has a tpe jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our FAKRA jack to FAKRA plug cable has a maximum VSWR of 1.4:1. This PE3W14583LF/BK FAKRA female to FAKRA male cable assembly is built with LMR-100A-UF, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded.Both connectors have a crimp/solder attachment method and a plastic body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14583LF/BK can also be used in the other direction and will be a FAKRA plug to FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA female to FAKRA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to FAKRA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W05139LF/BK

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to Reverse Polarity TNC Male Cable Using PE-SR402FLJ Coax., Pasternack’s PE3W05139LF/BK right angle 4.3-10 male to TNC male RF cable assembly using PE-SR402FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle 4.3-10 cable connection on one end and a reverse polarity TNC cable connection on the other. Our 4.3-10 to reverse polarity TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05139LF/BK can also be known as a right angle 4.3-10 plug to reverse polarity TNC plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05139LF/BK RF cable has an FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. This PE3W05139LF/BK 4.3-10 plug to reverse polarity TNC plug cable assembly is built with PE-SR402FLJ, which is a formable coax type. The Pasternack formable 4.3-10 cable assembly is manufactured with right angle 4.3-10 to TNC cable connectors and has a 50 Ohm impedance. One connector features the solder/solder attachment method and a brass body with tri-metal plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05139LF/BK can also be used in the other direction and will be a reverse polarity TNC male to right angle 4.3-10 male cable assembly if the opposite connectivity is required. This 4.3-10 right angle plug to TNC reverse polarity plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to TNC cable assembly for quick shipment worldwide. Variations of 4.3-10 and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to TNC RF cable assembly as per your requirements.

PE3W05117LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Female to Water Blue FAKRA Jack Right Angle Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3W05117LF/BK/HS SMA female to right angle FAKRA jack RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and a right angle FAKRA cable connection on the other. Our SMA to FAKRA cable assembly has a female gender on end 1 and a jack on end 2. PE3W05117LF/BK/HS can also be known as a SMA jack to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05117LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA female to right angle FAKRA jack cable has a maximum VSWR of 1.4:1. This PE3W05117LF/BK/HS SMA jack to FAKRA female cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05117LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to SMA female cable assembly if the opposite connectivity is required. This SMA jack to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to FAKRA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W05051LF/BK/HS

Pasternack Enterprises

PE3W05123LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack Right Angle to SMA Female Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3W05123LF/BK/HS right angle FAKRA jack to SMA female RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FAKRA jack to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and an SMA cable connection on the other. Our FAKRA to SMA cable assembly has a jack gender on end 1 and a female on end 2. PE3W05123LF/BK/HS can also be known as a right angle FAKRA female to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05123LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle FAKRA jack to SMA female cable has a maximum VSWR of 1.4:1. This PE3W05123LF/BK/HS FAKRA female to SMA jack cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05123LF/BK/HS can also be used in the other direction and will be an SMA female to right angle FAKRA jack cable assembly if the opposite connectivity is required. This FAKRA right angle female to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W05012LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. 10-32 Male Right Angle to BNC Male Right Angle Cable Using PE-C100-LSZH Coax with HeatShrink., Pasternack’s PE3W05012LF/BK/HS right angle 10-32 male to right angle BNC male RF cable assembly using PE-C100-LSZH coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10-32 male to BNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle 10-32 cable connection on one end and a right angle BNC cable connection on the other. Our 10-32 to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05012LF/BK/HS can also be known as a right angle 10-32 plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05012LF/BK/HS RF cable has an lszh jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05012LF/BK/HS 10-32 plug to BNC plug cable assembly is built with PE-C100-LSZH, which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05012LF/BK/HS can also be used in the other direction and will be a right angle BNC male to right angle 10-32 male cable assembly if the opposite connectivity is required. This 10-32 right angle plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to BNC RF cable assembly as per your requirements.

PE3W05025LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174NM, RF Cable Type: RG174NM, RF Cable Impedance: 50 Ohm. FME Plug to Bordeaux FAKRA Jack Right Angle Cable Using RG174 Non-Magnetic Coax with HeatShrink., Pasternack’s PE3W05025LF/BK/HS FME plug to right angle FAKRA jack RF cable assembly using RG174NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FME plug to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FME to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a FME cable connection on one end and a right angle FAKRA cable connection on the other. Our FME to FAKRA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W05025LF/BK/HS can also be known as a FME male to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05025LF/BK/HS RF cable has a pvc jacket. The flexible RF cable has a between series connection. This PE3W05025LF/BK/HS FME male to FAKRA female cable assembly is built with RG174NM, which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05025LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to FME plug cable assembly if the opposite connectivity is required. This FME male to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FME to FAKRA cable assembly for quick shipment worldwide. Variations of FME and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FME to FAKRA RF cable assembly as per your requirements.

PE3W05065LF/BK/HS

Pasternack Enterprises

PE3W05062LF/BK

Pasternack Enterprises

PE3W05116LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMA Male Cable Using LMR-100-FR Coax with HeatShrink, LF Solder., Pasternack’s PE3W05116LF/BK/HS right angle MCX plug to SMA male RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and an SMA cable connection on the other. Our MCX to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W05116LF/BK/HS can also be known as a right angle MCX male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05116LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05116LF/BK/HS MCX male to SMA plug cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05116LF/BK/HS can also be used in the other direction and will be an SMA male to right angle MCX plug cable assembly if the opposite connectivity is required. This MCX right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W05115LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using LMR-100-FR Coax with HeatShrink., Pasternack’s PE3W05115LF/BK/HS right angle SMA male to SMA male RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W05115LF/BK/HS can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05115LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05115LF/BK/HS SMA plug to SMA plug cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05115LF/BK/HS can also be used in the other direction and will be an SMA male to right angle SMA male cable assembly if the opposite connectivity is required. This SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PE3W16193LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.92mm Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Pasternack’s PE3W16193LF/BK/HS 2.4mm male to 2.92mm male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.4mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.4mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3W16193LF/BK/HS can also be known as a 2.4mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16193LF/BK/HS RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 2.4mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3W16193LF/BK/HS 2.4mm plug to 2.92mm plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16193LF/BK/HS can also be used in the other direction and will be a 2.92mm male to 2.4mm male cable assembly if the opposite connectivity is required. This 2.4mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.4mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.92mm RF cable assembly as per your requirements.

PE3W05121LF/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to SMA Female Cable Using LMR-100-FR Coax with HeatShrink., Pasternack’s PE3W05121LF/BK/HS right angle SMA male to SMA female RF cable assembly using LMR-100A-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity SMA cable connection on one end and an SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W05121LF/BK/HS can also be known as a right angle reverse polarity SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05121LF/BK/HS RF cable has an frpe jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. This PE3W05121LF/BK/HS reverse polarity SMA plug to SMA jack cable assembly is built with LMR-100A-FR, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05121LF/BK/HS can also be used in the other direction and will be an SMA female to right angle reverse polarity SMA male cable assembly if the opposite connectivity is required. This SMA reverse polarity right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.