| 数据搜索系统,热门电子元器件搜索 |
|
HS100 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() DigiKey | THS1007IDA | Rochester Electronics LLC | IC ADC 10BIT 32-TSSOP |
| 10,538 | |
| 0402HS-100EGTS | Delta Electronics Inc | FIXED IND 10NH 480MA 195 MOHM RoHS : Compliant |
| 1,501 | ||
| 0402HS-100EGTS | Delta Electronics Inc | FIXED IND 10NH 480MA 195 MOHM RoHS : Compliant |
| 1,501 | ||
| AISC-1210HS-100K-T2 | Abracon Corporation | FIXED IND 10UH 430MA 1.5 OHM SMD RoHS : Compliant |
| 248 | ||
| AISC-1210HS-100K-T2 | Abracon Corporation | FIXED IND 10UH 430MA 1.5 OHM SMD RoHS : Compliant | 248 | |||
| HS100F2R2F200 | Ohmite Mfg Co | RES CHAS MNT 2.2 OHMS 1% 100W |
| 53 | ||
| NHS100 25R J | Ohmite Mfg Co | RES CHAS MNT 25 OHMS 5% 100W |
| 44 | ||
| HS100 250R F | Ohmite Mfg Co | RES CHAS MNT 250 OHM 1% 100W |
| 29 | ||
| HS100E63R3FM193 | Ohmite Mfg Co | RES CHAS MNT 3.3 OHMS 1% 100W |
| 20 | ||
| DCNHS100PG24 | Littelfuse Inc | High Current Switches |
| 16 | ||
| HS100 560R F | Ohmite Mfg Co | RES CHAS MNT 560 OHMS 1% 100W |
| 14 | ||
| HS100 | Twin Industries | HEAT SHRINK TUBING; 6" (150MM) X |
| 11 | ||
| HS100E6 5R F M193 | Ohmite Mfg Co | RES CHAS MNT 5 OHMS 1% 100W |
| 2 | ||
| DHS100B12 | Cosel USA Inc | DC DC CONVERTER 12V RoHS : Compliant |
| 1 | ||
| DHS100A12 | Cosel USA Inc | DC DC CONVERTER 12V 101W RoHS : Compliant |
| 1 | ||
![]() Verical | HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 1,165 | |
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 620 | ||
| HS100 1K J | Ohmite Mfg Co | Res Wirewound 1KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 305 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 175 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 126 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 115 | ||
| HS100 4R F | Ohmite Mfg Co | Res Wirewound 4 Ohm 1% 30W/100W 100ppm/C Aluminum Housed Axial |
| 90 | ||
| HS100 1K J | Ohmite Mfg Co | Res Wirewound 1KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 49 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 4R F | Ohmite Mfg Co | Res Wirewound 4 Ohm 1% 30W/100W 100ppm/C Aluminum Housed Axial |
| 45 | ||
| HS100 1K J | Ohmite Mfg Co | Res Wirewound 1KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 4R F | Ohmite Mfg Co | Res Wirewound 4 Ohm 1% 30W/100W 100ppm/C Aluminum Housed Axial |
| 43 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 28 | ||
![]() Avnet Americas | AISC-1210HS-100K-T2 | Abracon Corporation | Wirewound Inductor, 10 uH, 1.5 Ohm, ? 10%, 36 MHz, 430 mA, 1210 [3225 Metric] - Tape and Reel (Alt: AISC-1210HS-100K-T2) RoHS : Compliant |
| 0 | |
| HDTF-3-06-S-RA-HS-100 | Samtec Inc | - Trays (Alt: HDTF-3-06-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| HS100582 | TE Connectivity | - Bulk (Alt: HS100582) RoHS : Compliant | 0 | |||
| HDTF-3-08-S-RA-HS-100 | Samtec Inc | - Trays (Alt: HDTF-3-08-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| SSHB10HS-10051 | KEMET Corporation | Choke, Common Mode, 5.1 mH, 1 A - Trays (Alt: SSHB10HS-10051) RoHS : Compliant |
| 0 | ||
| HS100092 | TE Connectivity | - Bulk (Alt: HS100092) RoHS : Compliant | 0 | |||
| HS100542 | TE Connectivity | SPV1PT100A_ 4.5X_23 7.0X137 2N - Bulk (Alt: HS100542) RoHS : Not Compliant |
| 0 | ||
| HDTF-3-04-S-RA-HS-100 | Samtec Inc | - Trays (Alt: HDTF-3-04-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| HDTF-6-08-S-RA-HS-100 | Samtec Inc | - Bulk (Alt: HDTF-6-08-S-RA-HS-100) RoHS : Compliant |
| 0 | ||
| HS100105 | TE Connectivity | - Bulk (Alt: HS100105) RoHS : Compliant | 0 | |||
| HS100345 | TE Connectivity | - Bulk (Alt: HS100345) RoHS : Compliant | 0 | |||
| ASPI-8040HS-100M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-8040HS-100M-T) RoHS : Compliant |
| 0 | ||
| HS100761 | TE Connectivity | - Bulk (Alt: HS100761) RoHS : Compliant | 0 | |||
| SCHS10000 | Micross Components | - Bulk (Alt: SCHS10000) RoHS : Not Compliant | 0 | |||
| SCHS10000 | Semtech Corporation | - Bulk (Alt: SCHS10000) RoHS : Not Compliant | 0 | |||
![]() Mouser Electronics | HS100 3R3 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 3.3 Ohms 5% RoHS : Compliant |
| 1,063 | |
| HS100 2R2 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 2.2 Ohms 5% RoHS : Compliant |
| 749 | ||
| HS100 2R7 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 2.7 Ohms 5% RoHS : Compliant |
| 344 | ||
| HS100 4K7 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 4.7K OHMS 1% RoHS : Compliant |
| 306 | ||
| HS100 3R3 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 100W 3.3 1% RoHS : Compliant |
| 268 | ||
| HS100 2R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 2.0 OHM1% RoHS : Compliant |
| 265 | ||
| HS100 3R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 3.0 OHM1% RoHS : Compliant |
| 234 | ||
| HS100 47R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 100W 47 1% RoHS : Compliant |
| 230 | ||
| HS100 1K5 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 1500 Ohms 5% RoHS : Compliant |
| 226 | ||
| HS100 2K2 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 2.2K OHMS 1% RoHS : Compliant |
| 92 | ||
| HS100 400R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 400 OHMS 1% RoHS : Compliant |
| 71 | ||
| HS100 7R5 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 100W 7.5 1% RoHS : Compliant |
| 58 | ||
| HS100 1K6 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 1.6K Ohm 1% PWR RES RoHS : Compliant |
| 37 | ||
| HS100 2K5 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 2.5K Ohm 1% PWR RES RoHS : Compliant |
| 35 | ||
| HS100 3K F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 100W 3K 1% RoHS : Compliant |
| 4 | ||
![]() Arrow Electronics | HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 175 | |
| HS100 1K5 J | Ohmite Mfg Co | Res Wirewound 1.5KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 145 | ||
| HS100 9R1 F | Ohmite Mfg Co | Res Wirewound 9.1Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 90 | ||
| HS100 25R F | Ohmite Mfg Co | Res Wirewound 25Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 90 | ||
| HS100 25R F | Ohmite Mfg Co | Res Wirewound 25Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 71 | ||
| HS100 9R1 F | Ohmite Mfg Co | Res Wirewound 9.1Ohm 1% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 70 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 5R F | Ohmite Mfg Co | Aluminum Housed Axial Terminal Wire wound RoHS : Must Be Verified |
| 45 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 2R2 J | Ohmite Mfg Co | Res Wirewound 2.2Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 2R2 J | Ohmite Mfg Co | Res Wirewound 2.2Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 45 | ||
| HS100 1K5 J | Ohmite Mfg Co | Res Wirewound 1.5KOhm 5% 30W/100W ±25ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 35 | ||
| HS100 1R J | Ohmite Mfg Co | Res Wirewound 1Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 28 | ||
| HS100 47R J | Ohmite Mfg Co | Res Wirewound 47Ohm 5% 30W/100W ±100ppm/°C Aluminum Housed Axial RoHS : Compliant |
| 7 | ||
![]() Newark | BKP0603HS100-T | TAIYO YUDEN | FERRITE BEAD, 0201, 10OHM, 1.3A; Available until stocks are exhausted RoHS : Compliant |
| 12,330 | |
| BKP0603HS100-T | TAIYO YUDEN | FERRITE BEAD, 0201, 10OHM, 1.3A; Available until stocks are exhausted RoHS : Compliant |
| 12,330 | ||
| KPHHS-1005LVQBC-D | Kingbright | LED, KINGBRIGHT KPHHS-1005LVQBC-D; RoHS : Compliant |
| 2,200 | ||
| KPHHS-1005LVQBC-D | Kingbright | LED, KINGBRIGHT KPHHS-1005LVQBC-D; RoHS : Compliant |
| 2,200 | ||
| KPHHS-1005LVZGCK | Kingbright | LED, GREEN, 40MCD, 525NM, SMD; RoHS : Compliant |
| 1,448 | ||
| KPHHS-1005LVSECK-J3-PF | Kingbright | LED, RED, 35MCD, 625NM, SMD; RoHS : Compliant |
| 1,350 | ||
| KPHHS-1005LVSECK-J3-PF | Kingbright | LED, RED, 35MCD, 625NM, SMD; RoHS : Compliant |
| 1,350 | ||
| MF-RHS1000-0 | Bourns Inc | PPTC RESETTABLE FUSE, RAD, RECTNGLR, 16V; RoHS : Compliant |
| 482 | ||
| HS100 2R F | Arcol | RES, 2R, 100W, SOLDER, WIREWOUND; Resistance:2ohm; Product Range:HS Series; Power Rating:100W; Resistance Tolerance:± 1%; Voltage Rating:1.9kV; Resistor Technology:Wirewound; Temperature Coefficient:± 100ppm/°C; Product Length:65.2mmRoHS Compliant: Yes RoHS : Compliant |
| 48 | ||
| SSHB10HS-10051 | KEMET Corporation | COMMON MODE CHOKE, 5.1MH, 1A, TH; DC Current Rating:1A; Product Range:SSHB10HS Series; Inductance:5.1mH RoHS Compliant: Yes RoHS : Compliant |
| 30 | ||
| RHS100 | Carlo Gavazzi Holding AG | RELAY HEAT SINK; Product Range:RHS Series; Thermal Resistance:3°C/W; Heat Sink Mounting:DIN Rail; External Length:75mm; External Height:82mm; External Width:45mm; Accessory Type:Heat Sink; Body Material:Plastic; Depth:49mm RoHS Compliant: Yes RoHS : Compliant |
| 19 | ||
| HS100F R5 J 200MM M372. | Ohmite Mfg Co | RES, 0R5, 100W, WIRE, WIREWOUND; RoHS : Compliant |
| 16 | ||
| HS100 | Twin Industries | HEAT-SHRINK TUBING, 2:1, PO, 20PC, 10MM; Kit Contents:20 Pieces of 10mm Dia Polyolefin Heat Shrink Tubing, 5 Each of 4 Colors; Product Range:- RoHS Compliant: Yes RoHS : Compliant |
| 13 | ||
| HS100 11K F | Arcol | RESISTOR, WIREWOUND, 11K, 1%, SOLDER LUG; RoHS : Compliant |
| 3 | ||
| HS100 300R F | Arcol | RESISTOR, WIREWOUND, 300R, 1%, SOLDERLUG; RoHS : Compliant |
| 1 | ||
![]() RS | HS100 100R J (188188) | Arcol | HS100 WIREWOUND RESISTOR, 100R 100W |
| 620 | |
| HS100 1R F | Ohmite Mfg Co | RESISTOR, WIREWOUND,1 OHMS,100 W,1%,LUG, TCR 100 PPM/DEGC, ALUMINUM HOUSED |
| 174 | ||
| RHS100 | Carlo Gavazzi Holding AG | HEATSINK, RHS SOLID STATE RELAY, 3.1DEGC/W, 48 X 44 X 82MM, DIN RAIL MOUNT |
| 69 | ||
| HS100 R47 J | Arcol | HS100 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 470MOHMS +/-5% 100W |
| 48 | ||
| HS 100 SC | Steel City | STEEL ONE HOLE STRAP, 3/8", ZINC PLATED, FOR USE WITH RIGID/IMC CONDUIT |
| 41 | ||
| HS100F 2K2 M372 | Ohmite Mfg Co | WIREWOUND RESISTORS |
| 40 | ||
| HS100 R5 J (188071) | Arcol | HS100 WIREWOUND RESISTOR, R5 100W |
| 35 | ||
| HS100 47R J (188166) | Arcol | RESISTOR, WIREWOUND, RES 47 OHMS, PWR-RTG 100 W, TOL 5%,LUG, ALUM HOUSED |
| 35 | ||
| HS100 10K F | Ohmite Mfg Co | RESISTOR, WIREWOUND,10 KILOHMS,100 W,1%,LUG, TCR 25 PPM/DEGC, ALUMINUM HOUSED |
| 31 | ||
| HS1003BPK25 | Hubbell Wiring Device-Kellems | CONNECTOR, CORD, MINIATURE SNAP-IN, BLK NYLON, 2.18" L, 0.37" ID, 25/PACK QTY |
| 24 | ||
| HS100 68R J | Arcol | HS100 WIREWOUND RESISTOR,68R 100W |
| 13 | ||
| HS100 1K J (188223) | Arcol | HS100 WIREWOUND RESISTOR,1K 100W |
| 10 | ||
| HS100 2R2 J (188093) | Arcol | HS100 WIREWOUND RESISTOR,2R2 100W |
| 7 | ||
| HS100 2R7 J (1074248) | Arcol | HS100 SERIES ALUMINUM HOUSED AXIAL PANEL MOUNT RESISTOR, 2.7OHMS +/-5% 100W |
| 6 | ||
| ECHS100 | Siemens | CABLE CONDUIT FITTING, 25.4MM NOMINAL SIZE |
| 1 | ||
![]() Bisco Industries | HS1.00FEP1.6 INCHES | Misc Wire Cable Tubing Sleeve | 1,008 | |||
| FHS100530 | SOCKET SCREWS | 102 | ||||
| FHS100412 | SOCKET SCREWS | 100 | ||||
| FHS100616 | SOCKET SCREWS | 99 | ||||
| FHS100820 | SOCKET SCREWS | 76 | ||||
| FHS100630 | SOCKET SCREWS | 57 | ||||
| FHS100312 | MISC. INDUSTRIAL HRD | 41 | ||||
| ACM36DRMH-S1002 | Sullins Connector Solutions | 20 | ||||
| RHS100 | MISC. RELAYS | 10 | ||||
![]() Onlinecomponents.com | HS100-10R-J | Ohmite Mfg Co | 100 WATTS AL HOUSED10 OHMS RoHS : Compliant |
| 440 | |
| HS100-8R-F | Ohmite Mfg Co | 100 WATTS AL HOUSED 8 OHMS RoHS : Compliant |
| 365 | ||
| HS100-470R-J | Ohmite Mfg Co | RoHS : Compliant |
| 271 | ||
| HS100-100R-J | Ohmite Mfg Co | RoHS : Compliant |
| 270 | ||
| HS100-R5-J | Ohmite Mfg Co | RoHS : Compliant |
| 127 | ||
| HS100-TP2 | Ohmite Mfg Co | HS100 RESISTOR THERMAL PAD RoHS : Compliant |
| 0 | ||
| HS100-SS | Thomas & Betts | 3/8 RIGID ONE HOLE STAINLE RoHS : Compliant |
| 0 | ||
| HS100-5R6-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-750R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-270R-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-1K-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-3K-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-2K5-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-1K3-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-400R-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | THS10064CDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 15,914 | |
THS10064IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 31,435 | ||
THS1007CDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 23,000 | ||
THS1007IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 10,538 | ||
THS10082CDA![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant |
| 12,650 | ||
THS10082IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 29,545 | ||
THS1009IDA![]() | Texas Instruments | IC ADC 1 CONV 10Bits Pipelined Parallel 32-SOP Tube RoHS : Compliant |
| 21,387 | ||
![]() Coilcraft Direct | 1008HS-100TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,579 | |
| 0805HS-100TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008HS-100TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, Halogen-Free RoHS : Compliant |
| 0 | ||
| 0805HS-100TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() TME | KPHHS-1005QBC-D-V | Kingbright | LED; blue; SMD; 0402; 40÷60mcd; 3.3÷4VDC; 1x0.5x0.5mm; 140°; 20mA |
| 5,439 | |
| KPHHS-1005ZGC-V | Kingbright | LED; green; SMD; 0402; 200÷450mcd; 3.3÷4.1VDC; 1x0.5x0.5mm; 140° |
| 1,385 | ||
| KPHHS-1005SYCK | Kingbright | LED; yellow; SMD; 0402; 80÷150mcd; 2÷2.5VDC; 1x0.5x0.5mm; 120°; 20mA RoHS : Compliant |
| 1,178 | ||
| HS100 22R J | Arcol | Resistor: wire-wound; 22Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 125 | ||
| HS100 1R J | Arcol | Resistor: wire-wound; 1Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 115 | ||
| HS100 47R J | Arcol | Resistor: wire-wound; 47Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 110 | ||
| HS10 0R22 J | Arcol | Resistor: wire-wound; 220mΩ; with heatsink; screw; 10W; ±5%; 160V |
| 101 | ||
| HS100 10R J | Arcol | Resistor: wire-wound; 10Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 96 | ||
| HS100 1R F | Arcol | Resistor: wire-wound; 1Ω; screw; 100W; ±1%; 1.9kV; 65.2x47.5x24.1mm |
| 57 | ||
| HS100-330RF | Arcol | Resistor: wire-wound; 330Ω; with heatsink; screw; 100W; ±1%; 1.9kV |
| 40 | ||
| HS100 10R F | Arcol | Resistor: wire-wound; 10Ω; screw; 100W; ±1%; 1.9kV; 100ppm/°C |
| 34 | ||
| HS100 20R J | Arcol | Resistor: wire-wound; 20Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 0 | ||
| HS100M 100R J M191 | Arcol | Resistor: wire-wound; 100Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 0 | ||
| HS100M 150R J M191 | Arcol | Resistor: wire-wound; 150Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 0 | ||
| HS100 1R5 J | Arcol | Resistor: wire-wound; 1.5Ω; with heatsink; screw; 100W; ±5%; 1.9kV |
| 0 | ||
![]() ComSIT USA | APHHS1005SURCK | Kingbright | AVAILABLE EU RoHS : Compliant | 12,893 | ||
| APHHS1005LSECKJ3PF | KINGBRIGHT ELECTRONIC CO LTD | AVAILABLE EU | 412 | |||
![]() ComSIT USA | KPHHS1005SYCK | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Super Bright Yellow, Water Clear, 0.8mm RoHS : Compliant | 12,000 | ||
| KPHHS1005SECK | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Super Bright Orange, Water Clear, 0.8mm RoHS : Compliant | 10,000 | |||
| KPHHS1005MGCKBING5 | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Mega Green, Water Clear, 0.8mm RoHS : Compliant | 4,000 | |||
| KPHHS1005SURWK | Kingbright | Red 7-segment display, 100mA, 2.0V, common cathode, 0.56" height, 4-digit, through-hole package. RoHS : Compliant | 2,000 | |||
| APHHS1005SURC | Kingbright | 1.0 x 0.5 mm SMD Chip LED Lamp Single Color LED, Hyper Red, Water Clear, 0.8mm RoHS : Compliant | 2,000 | |||
| KPHHS1005SURCK | Kingbright | 1.0 MM X 0.5 MM X 0.5 MM (0402) HIGH CURRENT AND SURFACE MOUNT LED LAMP Single Color LED, Hyper Red, Water Clear, 0.8mm RoHS : Compliant | 2,000 | |||
| KPHHS1005MGCKBING6 | Kingbright | 1.0 X 0.5 MM SMD CHIP LED LAMP Single Color LED, Mega Green, Water Clear, 0.8mm RoHS : Compliant | 2,000 | |||
| KPHHS1005LVSECKJ4PFW | Kingbright | Electronic Component RoHS : Compliant | 1,425 | |||
| KPHHS1005QBCDVBINH3A | Kingbright | Blue Chip LED 1x0.5mm RoHS : Compliant | 1,165 | |||
THS1007IDA![]() | Texas Instruments | 10-BIT, 4 ANALOG INPUT, 6-MSPS, SIMULTANEOUS SAMPLING ANALOG-TO-DIGITAL CONVERTER ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 41 | |||
![]() Interstate Connecting Components | RHS100 | Carlo Gavazzi Holding AG | SSR 1PH DIN RAIL HEAT SINK |
| 4 | |
| 4470HS1009ZL15 | Glenair Inc | 0 | ||||
| 4470HS1009ZL19 | Glenair Inc | 0 | ||||
| 380HS100XW1108-434 | Glenair Inc | Glenair | 0 | |||
| 347HS100XM15-2H12-108 | Glenair Inc | 0 | ||||
| 4470HS1009ZL17 | Glenair Inc | 38999 BACKSHELL SZ 17 | 0 | |||
| 4470HS1009ZL13 | Glenair Inc | 0 | ||||
| 4470HS1009ZR17 | Glenair Inc | 0 | ||||
| 380HS100XW2336-434 | Glenair Inc | Glenair Item | 0 | |||
| 317HS100-11BT | Glenair Inc | 0 | ||||
| HS100542 | TE Connectivity | SPV1PT100A_ 4.5X_23 7.0X137 2N | 0 | |||
| HS100580 | TE Connectivity | P082PT100B_ 3.2X_10 6.0X_50 6B | 0 | |||
| HS100745 | TE Connectivity | P061PT100A 3.0X 50 X 4B24P |
| 0 | ||
| 4470HS1009ZL23 | Glenair Inc | 38999 STR B/S SZ 23 | 0 | |||
| 660-010NFHS10-05 | Glenair Inc | PROTECTIVE COVER |
| 0 | ||
![]() NexGen Digital | APHHS1005CGCK | Kingbright | RoHS : Compliant | 48,000 | ||
| APHHS1005LSECK/J3-PF | Kingbright | RoHS : Compliant | 14,000 | |||
![]() Powell Electronics | 347HS100XM17-8N | Glenair Inc | COMPOSITE - SHORTING CAP ADAPTER |
| 5 | |
![]() Richardson RFPD | HS100470RJ:WA | Ohmite Mfg Co | Res Wirewound 470 Ohm 5% 30/100W ±100ppm/C Aluminu RoHS : Compliant |
| 2,430 | |
| HS100 560R F | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
| HS100E6 4R F M193 | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
| HS100F2R2F200MMM372 | Ohmite Mfg Co | HS100F2R2F200MMM372 RoHS : Compliant |
| 0 | ||
| NHS100 200R F | Ohmite Mfg Co | NHS100 200R F RoHS : Compliant |
| 0 | ||
| HS100 1R5 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS100 20R J | Ohmite Mfg Co | HS100 20R J RoHS : Compliant |
| 0 | ||
| HS100 330R F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS100E6 5R F M193 | Ohmite Mfg Co | HS100E6 5R F M193 RoHS : Compliant |
| 0 | ||
| HS100 250R F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS10010RJ | Ohmite Mfg Co | Res Wirewound 10 Ohm 5% 30/100W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS100E6 3R3 F M193 | Ohmite Mfg Co | HS100E6 3R3 F M193 RoHS : Compliant |
| 0 | ||
| HS100 20K F | Ohmite Mfg Co | Res Wirewound 20K Ohm 1% 30/100W ±25ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS100 R56 J | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS100F220RF200MMM372 | Ohmite Mfg Co | Cable Leaded Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | APHHS1005LSECK/J4-PF | Kingstate Electronics Corporation | INSTOCK | 2,178 | ||
| APHHS1005SURCK | Kingstate Electronics Corporation | INSTOCK | 2,000 | |||
| KPHHS-1005SURCK | INSTOCK | 1,000 | ||||
| EHS10-050-0B | INSTOCK | 21 | ||||
| APHHS1005QBC/D | Kingstate Electronics Corporation | INSTOCK | 5 | |||
![]() Avnet Abacus | KPHHS-1005CGCK | Kingbright | LED Single Chip Green 570nm 30mA 2Pin SMD TR (Alt: KPHHS-1005CGCK) RoHS : Compliant | 388,000 | ||
| KPHHS-1005SYCK | Kingbright | LED Single Chip Super Bright Yellow 590nm 30mA 2Pin SMD TR (Alt: KPHHS-1005SYCK) RoHS : Compliant | 264,000 | |||
| KPHHS-1005SURCK | Kingbright | LED Single Chip Hyper Red 635nm 30mA 2Pin SMD TR (Alt: KPHHS-1005SURCK) RoHS : Compliant | 234,000 | |||
| KPHHS-1005MGCK | Kingbright | LED Single Chip Mega Green 570nm 30mA 2Pin SMD TR (Alt: KPHHS-1005MGCK) RoHS : Compliant | 110,000 | |||
| KPHHS-1005LVCGCK | Kingbright | (Alt: KPHHS-1005LVCGCK) RoHS : Compliant | 14,000 | |||
| KPHHS-1005QBC-D-V | Kingbright | LED Low Power Blue SMD 1005 20 mA 33 V 465 nm (Alt: KPHHS-1005QBC-D-V) RoHS : Compliant | 10,000 | |||
| KPHHS-1005ZGC-V | Kingbright | KINKPHHS1005ZGCV (Alt: KPHHS-1005ZGC-V) RoHS : Compliant | 8,000 | |||
| KPHHS-1005LVSECK-J3-PF | Kingbright | LED Single Chip Hyper Red 625nm 30mA 2Pin SMD TR (Alt: KPHHS-1005LVSECK-J3-PF) RoHS : Compliant | 4,000 | |||
| BK1005HS100-T | TAIYO YUDEN | Ferrite Bead 0402 1005 Metric 10 ohm 1 A BK Series 30 mohm 5 - Tape and Reel (Alt: CEEMK325B7226KMHP) RoHS : Compliant | 0 | |||
| KPHHS-1005SECK | Kingbright | LED UniColor Orange 610nm 2Pin Chip LED TR (Alt: KPHHS-1005SECK) RoHS : Compliant | 0 | |||
| BKP0603HS100-T | TAIYO YUDEN | - Tape and Reel (Alt: LFBKP0603HS100-T) RoHS : Compliant | 0 | |||
| KPHHS-1005VGC-A | Kingbright | (Alt: KPHHS-1005VGC-A) RoHS : Compliant | 0 | |||
| KPHHS-1005LVQBC-D | Kingbright | LED Single Chip Blue 465nm 30mA 2Pin SMD TR (Alt: KPHHS-1005LVQBC-D) RoHS : Compliant | 0 | |||
| AISC-1210HS-100K-T2 | Abracon Corporation | Wirewound Inductor 10 uH 15 Ohm 10 36 MHz 430 mA 1210 3225 Metric - Tape and Reel (Alt: AISC-1210HS-100K-T2) RoHS : Compliant | 0 | |||
| HDTF-3-08-S-RA-HS-100 | Samtec Inc | (Alt: HDTF-3-08-S-RA-HS-100) RoHS : Compliant | 0 | |||
![]() Avnet Asia | APHHS1005CGCK | Kingbright | LED Single Chip Green 570nm 30mA 2-Pin SMD T/R (Alt: APHHS1005CGCK) RoHS : Compliant | 0 | ||
| APHHS1005SECK | Kingbright | (Alt: APHHS1005SECK) RoHS : Compliant | 0 | |||
| APHHS1005SURCK | Kingbright | (Alt: APHHS1005SURCK) RoHS : Compliant | 0 | |||
| APHHS1005LSYCK/J3-PF | Kingbright | (Alt: APHHS1005LSYCK/J3-PF) RoHS : Compliant | 0 | |||
| APHHS1005SYCK | Kingbright | (Alt: APHHS1005SYCK) RoHS : Compliant | 0 | |||
| NTHS1005N01N5002JE | Vishay Intertechnologies | VISNTHS1005N01N5002JE NTHS-1005N01 50K 5 (Alt: NTHS1005N01N5002JE) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | HS-100B | C-Media Electronics Inc | USB Audio Codec improved on HS-100 with crystal-less design |
| 1 | |
| HS-100C | C-Media Electronics Inc | USB Audio Codec improved on HS-100B with crystal-less design |
| 1 | ||
| HS-100C-EVB-001 | C-Media Electronics Inc | HS-100BC Eval Board |
| 1 | ||
| AISC-1210HS-100K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| WH-S1005-500-02 | Nipron Co |
| 0 | |||
| ASPI-8040HS-100M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| WH-S1005-500-03 | Nipron Co |
| 0 | |||
| WH-S1004-500-02 | Nipron Co |
| 0 | |||
| WH-S1004-500-01 | Nipron Co |
| 0 | |||
| HS-100 | C-Media Electronics Inc | USB Audio Codec |
| 0 | ||
![]() Component Electronics, Inc | APHS1005SURCK | Kingbright | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | |
| APHHS1005CGCK | Kingbright | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,133 | ||
| 1008HS-100TJBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 500 | |||
| 1008HS-100TKBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 437 | |||
| HS-100-20.000MHZ | NEL | IN STOCK SHIP TODAY | 24 | |||
THS1007IDA![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
![]() DB Roberts | THS1001-M07-F15 | UNICORP |
| 1 | ||
| SRLAHS-10-01 | Essentra Components | CB SptRivet MntNatural5/8 in Spc | 0 | |||
| HS10076A | Essentra Components | HOOK - S STYLESPRING STEEL | 0 | |||
| FHS-100 | Sugatsune Kogyo Co Ltd | WELD ON BUTT HINGE, 304 STAINL | 0 | |||
![]() FDH Electronics | 660-010NFHS10-05 | Glenair Inc | Connector |
| 0 | |
![]() Master Electronics | HS100-15R-J | Ohmite Mfg Co | 100 WATTS AL HOUSED15 OHMS RoHS : Compliant |
| 822 | |
| HS100-220R-J | Ohmite Mfg Co | RoHS : Compliant |
| 575 | ||
| RHS100 | Carlo Gavazzi Holding AG | The RHS100 is a heatsink assembly designed for mounting a single 1-phase solid state relay (SSR). RoHS : Compliant |
| 40 | ||
| HS100-3R-F | Ohmite Mfg Co | 100 WATTS AL HOUSED 3 OHMS RoHS : Compliant |
| 25 | ||
| HS100-3K9-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-5R6-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100E6-47R-F-M193 | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100F2R2F200MMM372 | Ohmite Mfg Co | 100 WATT AL HOUSED LEADED RoHS : Compliant |
| 0 | ||
| HDTF-6-06-S-RA-HS-100 | Samtec Inc | XCEDE HD 1.80 MM HIGH-DE RoHS : Compliant |
| 0 | ||
| HS100-1K2-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-2K5-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-16R-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| HS100-47R-F | Ohmite Mfg Co | 100 WATTS AL HOUSED47 OHMS RoHS : Compliant |
| 0 | ||
| MTMM-101-10-H-S-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HS100-3R-J | Ohmite Mfg Co | 100 WATTS AL HOUSED 3 OHMS RoHS : Compliant |
| 0 | ||
![]() Neutron USA | RHS100 | Carlo Gavazzi Holding AG | Heatsink, RHS Solid State Relay, 3.1degC/W, 48 x 44 x 82mm, Din Rail Mount |
| 50 | |
| NHS100 25R J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100 Watts Al Housed 25 Ohms 5% |
| 50 | ||
| HS100 100R J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 100 Ohms 5% |
| 50 | ||
| HS100 4R7 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 4.7 Ohms 5% |
| 25 | ||
| HS100 68R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 68 OHMS 1% |
| 19 | ||
| HS100 330R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount PWR RES 100W 330 1% |
| 10 | ||
| HS100 R47 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount ALUM HS 100W 0.47 5% |
| 6 | ||
| DHS100B12 | Cosel USA Inc | Isolated DC/DC Converters 100.8W 12V 8.4A, Input: DC200 - 400 Through Hole 6-DIP RoHS : Compliant |
| 5 | ||
| DHS100A12 | Cosel USA Inc | Isolated DC/DC Converters 100W 12V 8.4A Through Hole RoHS : Compliant |
| 5 | ||
| HS100E6 1K F M193 | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 1K ohm 1% Alum Housed |
| 5 | ||
| HS100 120R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 120 OHMS 1% |
| 3 | ||
| SNDHS100B12 | Cosel USA Inc | DC/DC CONVERTER 12V 101W RoHS : Compliant |
| 2 | ||
| HS100E6 4R F M193 | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 4 ohm 1% Alum Housed |
| 0 | ||
| HS100F 220R F 200MM M372 | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 220 ohm ,1% 100W |
| 0 | ||
| HS100 27R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 100W 27 OHMS 1% |
| 0 | ||
![]() Pasternack Enterprises US | PE3W05863/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Snap-On MMBX Plug to SMA Male Cable 100 cm Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly snap-on MMBX plug to SMA male cable 100 cm length using PE-SR405FLJ coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA male cable 100 cm length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA cable connection on the other. Our MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3W05863/HS-100CM, can also be known as a MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3W05863/HS-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency MMBX plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05863/HS-100CM can also be used in the other direction and will be SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA male cable 100 cm length using PE-SR405FLJ coax with heatshrink. |
| 69 | |
| PE3W00677LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMB Jack to BNC Male Cable 100 cm Length Using RG196 Coax with HeatShrink, LF Solder., Radio frequency assembly SMB jack to BNC male cable 100 cm length using RG196 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB jack to BNC male cable 100 cm length using RG196 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assemblies have a jack gender on end 1 and male on end 2. This SMB to BNC cable is a jack to male coax assembly, PE3W00677LF/HS-100CM, can also be known as a SMB female to BNC plug cable assembly and will be shipped same-day as it is purchased. SMB female to BNC plug cable assembly PE3W00677LF/HS-100CM is built with RG196 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMB jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00677LF/HS-100CM can also be used in the other direction and will be BNC male to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack to BNC male cable 100 cm length using RG196 coax with heatshrink, LF solder. |
| 8 | ||
| PE3W06454/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SSMC Plug to BNC Male Cable 100 cm Length Using RG174 Coax with HeatShrink., Radio frequency assembly SSMC plug to BNC male cable 100 cm length using RG174 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to BNC male cable 100 cm length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and BNC cable connection on the other. Our SSMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to BNC cable is a plug to male coax assembly, PE3W06454/HS-100CM, can also be known as a SSMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to BNC plug cable assembly PE3W06454/HS-100CM is built with RG174 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SSMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06454/HS-100CM can also be used in the other direction and will be BNC male to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to BNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to BNC male cable 100 cm length using RG174 coax with heatshrink. |
| 0 | ||
| PE3W08711/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Push-On SMP Female Right Angle to TNC Female Bulkhead Low Loss Cable 100 CM Length Using PE-C100 Coax., Radio frequency assembly push-on SMP female right angle to TNC female bulkhead low loss cable 100 cm length using PE-C100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Push-on SMP female right angle to TNC female bulkhead low loss cable 100 cm length using PE-C100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMP cable connection on one end and TNC bulkhead cable connection on the other. Our low loss right angle SMP to TNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to TNC cable is a female to female coax assembly, PE3W08711/HS-100CM, can also be known as a low loss right angle SMP jack to TNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to TNC jack cable assembly PE3W08711/HS-100CM is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5 GHz maximum frequency SMP right angle female to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08711/HS-100CM can also be used in the other direction and will be TNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to TNC female bulkhead low loss cable 100 cm length using PE-C100 coax. |
| 0 | ||
| PE3W09941/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 10-32 Female Bulkhead to 10-32 Female Bulkhead Cable 100 cm Length Using RG316 Coax with HeatShrink., Radio frequency assembly 10-32 female bulkhead to 10-32 female bulkhead cable 100 cm length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 female bulkhead to 10-32 female bulkhead cable 100 cm length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to 10-32 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 bulkhead cable connection on one end and 10-32 bulkhead cable connection on the other. Our 10-32 to 10-32 cable assemblies have a female gender on end 1 and female on end 2. This 10-32 to 10-32 cable is a female to female coax assembly, PE3W09941/HS-100CM, can also be known as a 10-32 jack to 10-32 jack cable assembly and will be shipped same-day as it is purchased. 10-32 jack to 10-32 jack cable assembly PE3W09941/HS-100CM is built with RG316 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to 10-32 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 10-32 female bulkhead to 10-32 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 10-32 jack bulkhead to 10-32 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to 10-32 cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 female bulkhead to 10-32 female bulkhead cable 100 cm length using RG316 coax with heatshrink. |
| 0 | ||
| PE3W06084/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly push-on SMP female right angle to SSMB jack bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The push-on SMP female right angle to SSMB jack bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMP cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss right angle SMP to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W06084/HS-100CM can also be known as a low loss right angle SMP jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06084/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMP jack to SSMB female cable assembly PE3W06084/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W06084/HS-100CM can also be used in the other direction and will be a SSMB jack bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. Low loss SMP right angle jack to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SSMB cable assembly for quick shipment worldwide. Variations of SMP and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06336/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Male to TNC Male Right Angle Cable 100 cm Length Using RG316 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male right angle cable 100 cm length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male right angle cable 100 cm length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W06336/HS-100CM, can also be known as a TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W06336/HS-100CM is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.5 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06336/HS-100CM can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle cable 100 cm length using RG316 coax with heatshrink. |
| 0 | ||
| PE3W08705/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MMCX Plug to N Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MMCX plug to N female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug to N female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a MMCX cable connection on one end and a type N bulkhead cable connection on the other. Our low loss MMCX to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W08705/HS-100CM can also be known as a low loss MMCX male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08705/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our MMCX plug to bulkhead type N female cable has a maximum VSWR of 1.4:1. MMCX male to type N jack cable assembly PE3W08705/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W08705/HS-100CM can also be used in the other direction and will be a type N female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX male to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to type N cable assembly for quick shipment worldwide. Variations of MMCX and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE39231/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. |
| 0 | ||
| PE3C1704/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Male to SMA Male Cable 100 cm Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly TNC male to SMA male cable 100 cm length using LMR-400-UF coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to SMA male cable 100 cm length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and SMA cable connection on the other. Our TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. This TNC to SMA cable is a male to male coax assembly, PE3C1704/HS-100CM, can also be known as a TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C1704/HS-100CM is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1704/HS-100CM can also be used in the other direction and will be SMA male to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male cable 100 cm length using LMR-400-UF coax with heatshrink. |
| 0 | ||
| PE3W13530/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. Water Blue FAKRA Jack to TNC Male Right Angle Cable 100 Cm Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to TNC male right angle cable 100 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Water blue FAKRA jack to TNC male right angle cable 100 cm length using LMR-100A-UF coax with heatshrink, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and right angle TNC cable connection on the other. Our FAKRA to right angle TNC cable assemblies have a jack gender on end 1 and male on end 2. PE3W13530/HS-100CM can also be known as a FAKRA female to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to TNC plug cable assembly PE3W13530/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA jack to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13530/HS-100CM can also be used in the other direction and will be right angle TNC male to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to TNC male right angle cable 100 cm length using LMR-100A-UF coax with heatshrink. |
| 0 | ||
| PE3C9608/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MMCX Plug Right Angle to N Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to N female bulkhead low loss cable 100 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug right angle to N female bulkhead low loss cable 100 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle MMCX cable connection on one end and a type N bulkhead cable connection on the other. Our low loss right angle MMCX to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3C9608/HS-100CM can also be known as a low loss right angle MMCX male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9608/HS-100CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MMCX plug to bulkhead type N female cable has a maximum VSWR of 1.4:1. MMCX male to type N jack cable assembly PE3C9608/HS-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9608/HS-100CM can also be used in the other direction and will be a type N female bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX right angle male to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to type N cable assembly for quick shipment worldwide. Variations of MMCX and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01260/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. N Male to SMA Male Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly N male to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01260/HS-100CM can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01260/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3W01260/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01260/HS-100CM can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W17014/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Fire Rated SMA Male to SMA Male Low Loss Cable 100 CM Length Using LMR-100-FR Coax with HeatShrink., Radio frequency assembly fire rated SMA male to SMA male low loss cable 100 cm length using LMR-100-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male to SMA male low loss cable 100 cm length using LMR-100-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17014/HS-100CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17014/HS-100CM RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W17014/HS-100CM is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W07122/HS-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Male to SMA Male Right Angle Cable 100 cm Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly BNC male to SMA male right angle cable 100 cm length using LMR-240-UF coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to SMA male right angle cable 100 cm length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle SMA cable connection on the other. Our low loss BNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This BNC to SMA cable is a male to male coax assembly, PE3W07122/HS-100CM, can also be known as a low loss BNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W07122/HS-100CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07122/HS-100CM can also be used in the other direction and will be right angle SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male right angle cable 100 cm length using LMR-240-UF coax with heatshrink. |
| 0 | ||
![]() Sager | EHS10-050-NHCC | Murata Power Solutions | Isolated DC/DC Converters - Through Hole | 0 | ||
| HDTF-6-06-S-RA-HS-100 | Samtec Inc | High Speed / Modular Connectors XCede HD 1.80 mm High-Density Backplane Right-Angle Receptacle RoHS : Compliant |
| 0 | ||
| DHS100B12 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 12V 8.4A Through Hole RoHS : Compliant |
| 0 | ||
| DHS100A12 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 12V 8.4A Through Hole RoHS : Compliant |
| 0 | ||
| APHHS1005CGCK | Kingbright | Standard LEDs - SMD GREEN WTR CLEAR 40mcd 574nm RoHS : Compliant |
| 0 | ||
| DHS100A12-T | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 12V 8.4A Through Hole RoHS : Compliant |
| 0 | ||
| DHS100A15 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 15V 6.7A Through Hole RoHS : Compliant |
| 0 | ||
| HDTF-3-06-S-RA-HS-100 | Samtec Inc | High Speed / Modular Connectors XCede HD 1.80 mm High-Density Backplane Right-Angle Receptacle RoHS : Compliant |
| 0 | ||
| HS1004GPK25 | Hubbell Incorporated | JR CORD CONN, SNAPIN, .32-.43, GY, 25PK |
| 0 | ||
| HS1003BPK25 | Hubbell Incorporated | CORD CONN JR, SNAPIN, .30-.36, BK, 25PK |
| 0 | ||
| SNDHS100B24 | Cosel USA Inc | Isolated DC/DC Converters - SMD 100W 24V 4.2A VALUE ADDED RoHS : Compliant |
| 0 | ||
| DHS100B24-T | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 24V 4.2A Through Hole RoHS : Compliant |
| 0 | ||
| HS100582 | TE Connectivity | Industrial Humidity Sensors P032PT100A_ 4.7X282 7.0X_45 6B | 0 | |||
| DHS100B24 | Cosel USA Inc | Isolated DC/DC Converters - Through Hole 100W 24V 4.2A Through Hole RoHS : Compliant |
| 0 | ||
| SNDHS100B12 | Cosel USA Inc | Isolated DC/DC Converters - SMD 100W 12V 8.4A VALUE ADDED RoHS : Compliant |
| 0 | ||
![]() Vyrian | BKP1005HS100-TV | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | 18,026 | ||
| HS10025RF | Ohmite Manufacturing | Fixed Resistor, Wire Wound, 100W, 25ohm, 1900V, 1% +/-Tol, 100ppm/Cel, Chassis Mount | 15,481 | |||
THS1009CDAR![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 9,510 | |||
THS1009CDA![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Not Compliant | 8,846 | |||
THS1009IDAG4![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 8,265 | |||
| THS1009EVM | Texas Instruments | 6,699 | ||||
THS10064CDARG4![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 5,413 | |||
| THS1007CDARG4 | Texas Instruments | A/D Converter, 10-Bit, 4 Channel, CMOS, PDSO32 RoHS : Compliant | 5,104 | |||
| THS10064IDARG4 | Texas Instruments | A/D Converter, 10-Bit, 1 Func, 1 Channel, CMOS, PDSO32 RoHS : Compliant | 4,675 | |||
THS1007CDAG4![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 3,325 | |||
| THS10082EVM | Texas Instruments | 3,179 | ||||
| THS1007IDARG4 | Texas Instruments | A/D Converter, 10-Bit, 4 Channel, CMOS, PDSO32 RoHS : Compliant | 3,167 | |||
THS10082CDAG4![]() | Texas Instruments | ADC, Proprietary Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PDSO32 RoHS : Compliant | 3,001 | |||
| HS100F1R0E | Ohmite Manufacturing | Fixed Resistor, Wire Wound, 100W, 1ohm, 1900V, 1% +/-Tol, 50ppm/Cel, Chassis Mount | 764 | |||
| BKP1005HS100-T8 | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | 615 | |||
![]() Win Source Electronics | APHHS1005CGCK | Kingbright | LED GREEN CLEAR 0402 SMD RoHS : Compliant |
| 200,000 | |
| KPHHS-1005SYCK | Kingbright | KPHHS-1005SYCK Yellow LED, 590 nm 1005 (0402), Rectangle Lens SMD package RoHS : Compliant |
| 60,000 | ||
| APHHS1005LSECK/J3-PF | Kingbright | LED RED CLEAR 2SMD RoHS : Compliant |
| 60,000 | ||
| KPHHS-1005QBC-D-V | Kingbright | LED Uni-Color Blue 460nm 2-Pin Chip LED T/R |
| 60,000 | ||
| HS-100B | C-Media Electronics Inc | USB2.0 FULL SPEED AUDIO |
| 30,000 | ||
| APHHS1005SURCK | Kingbright | LED RED CLEAR 0402 SMD RoHS : Compliant |
| 16,675 | ||
| APHHS1005SYCK | Kingbright | LED YELLOW CLEAR CHIP SMD RoHS : Compliant |
| 15,620 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |