| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow |
 DigiKey | FBMJ1608HS220NTW
| TAIYO YUDEN | FERRITE BEAD 22 OHM 0603 1LN RoHS : Compliant | 8,000 : $0.04725 4,000 : $0.05076
|
| 25,268
 |
FBMJ1608HS220NTW
| TAIYO YUDEN | FERRITE BEAD 22 OHM 0603 1LN RoHS : Compliant | 1,000 : $0.06752 500 : $0.07686 250 : $0.08692 100 : $0.1015 50 : $0.1136 25 : $0.1268 10 : $0.146 1 : $0.21
|
| 25,268
 |
FBMJ1608HS220NTW
| TAIYO YUDEN | FERRITE BEAD 22 OHM 0603 1LN RoHS : Compliant | 1,000 : $0.06752 500 : $0.07686 250 : $0.08692 100 : $0.1015 50 : $0.1136 25 : $0.1268 10 : $0.146 1 : $0.21
|
| 25,268
 |
V0603MHS22NR
| Littelfuse Inc | VARISTOR 30V 0603 RoHS : Compliant | 12,000 : $0.15888 8,000 : $0.15918 4,000 : $0.16341
|
| 7,712
 |
V0603MHS22NR
| Littelfuse Inc | VARISTOR 30V 0603 RoHS : Compliant | 1,000 : $0.20584 500 : $0.21476 250 : $0.2256 100 : $0.2436 25 : $0.2812 10 : $0.315 1 : $0.45
|
| 3,712
 |
V0603MHS22NR
| Littelfuse Inc | VARISTOR 30V 0603 RoHS : Compliant | 1,000 : $0.20584 500 : $0.21476 250 : $0.2256 100 : $0.2436 25 : $0.2812 10 : $0.315 1 : $0.45
|
| 3,712
 |
SSHS-225-D-07-H-LF
| Major League Electronics | .079 Socket | 25,000 : $3.84 5,000 : $4.32 1 : $4.8
|
| 1,423
 |
HS-2206-A1 NS
| C&K Switches | SWITCH DETECTOR DPDT 200MA 30V | 2,500 : $3.78969 1,000 : $4.0116 500 : $4.20578 250 : $4.42396 100 : $4.75 25 : $5.322 10 : $5.746 1 : $6.91
|
| 588
 |
PHS227JKP4210ME4
| KEMET Corporation | CAP ALUM HYB 2100UF 20% 35V SMD | 800 : $9.0589 400 : $9.3974 50 : $10.8884 10 : $12.77 1 : $17.34
|
| 400
 |
PHS227HLP4520ME4
| KEMET Corporation | CAP ALUM HYB 5200UF 20% 25V SMD | 630 : $10.57056 315 : $10.97067 50 : $12.4768 10 : $14.563 1 : $19.63
|
| 314
 |
PHS223HKP4360ME4
| KEMET Corporation | CAP ALUM HYB 3600UF 20% 25V SMD | 800 : $8.98876 400 : $9.3254 50 : $10.808 10 : $12.679 1 : $17.22
|
| 300
 |
HS-2212M-02-0300
| PIC GmbH | SENSOR HALL VOLTAGE WIRE LEADS | 1,000 : $6.78035 500 : $6.97462 100 : $7.4957 50 : $7.7544 25 : $8.0368 10 : $8.45 5 : $8.796 1 : $9.72
|
| 233
 |
HS-2212M-01-0300
| PIC GmbH | SEN BIPOLAR SW VOLTAGE W LEADS | 1,000 : $6.78035 500 : $6.97462 100 : $7.4957 50 : $7.7544 25 : $8.0368 10 : $8.45 5 : $8.796 1 : $9.72
|
| 57
 |
HS229CHA
| NetPower Technologies Inc | 22.9MM HALF BRICK HEATSINK | | 50
 |
TMUXHS221EVM
| Texas Instruments | EVAL BOARD FOR TMUXHS221 | 25 : $212.8156 10 : $213.011 1 : $213.5
|
| 1
 |
 Newark | MHS22304
| TE Connectivity | SLIDE SWITCH, DPDT, 0.3A, 125VAC, THT; Contact Configuration:DPDT; Switch Operation:On-Off-On; Switch Mounting:Through Hole; Product Range:MHS Series; Contact Current Max:300mA; Contact Voltage AC Max:125V; Contact Voltage DC Max:- RoHS Compliant: Yes RoHS : Compliant | 1 : $3.79 10 : $3.6 25 : $3.36 50 : $3.07 100 : $2.86 250 : $2.61 500 : $2.32 1,000 : $2.18
|
| 4,446
 |
MP-HS-2210M-4-0300
| SPC Multicomp | MAGNETIC SENSOR, BRASS, -20 TO 85DEG C; RoHS : Compliant | 1 : $23.79 100 : $19.88 250 : $18.46 500 : $17.32 1,000 : $16.4
|
| 245
 |
MP-HS-2210M-1-0300
| SPC Multicomp | MAGNETIC SENSOR, BRASS, -20 TO 85DEG C; RoHS : Compliant | 1 : $23.79 100 : $19.88 250 : $18.46 500 : $17.32 1,000 : $16.4
|
| 228
 |
MP-HS-2210M-2-0300
| SPC Multicomp | MAGNETIC SENSOR, BRASS, -20 TO 85DEG C; RoHS : Compliant | 1 : $23.79 100 : $19.88 250 : $18.46 500 : $17.32 1,000 : $16.4
|
| 225
 |
MP-HS-2210M-5-0300
| SPC Multicomp | MAGNETIC SENSOR, BRASS, -20 TO 85DEG C; RoHS : Compliant | 1 : $23.79 100 : $19.88 250 : $18.46 500 : $17.32 1,000 : $16.4
|
| 220
 |
MP-HS-2210M-3-0300
| SPC Multicomp | MAGNETIC SENSOR, BRASS, -20 TO 85DEG C; RoHS : Compliant | 1 : $23.79 100 : $19.88 250 : $18.46 500 : $17.32 1,000 : $16.4
|
| 164
 |
FMCA3185/HS2-24
| Fairview Microwave Inc | RoHS : Not Compliant | | 129
 |
FMCA3247/HS2-24
| Fairview Microwave Inc | RoHS : Not Compliant | | 18
 |
57HS22-03-1-05N
| Grayhill Inc | RoHS : Not Compliant | 1 : $268.31 5 : $262.94 10 : $257.57999 25 : $252.21001 50 : $244.17
|
| 7
 |
57HS22-02-4-04N
| Grayhill Inc | RoHS : Compliant | 1 : $352.44 5 : $345.39999 10 : $338.34 25 : $331.29001 50 : $320.72
|
| 6
 |
57HS22-06-1-12N
| Grayhill Inc | RoHS : Not Compliant | 1 : $435.48999 5 : $426.78 10 : $418.07001 25 : $409.35999 50 : $396.29999
|
| 4
 |
57HS22-01-2-04S
| Grayhill Inc | RoHS : Not Compliant | 10 : $111.94 25 : $110.02 50 : $106.55
|
| 3
 |
57HS22-05-1-12N
| Grayhill Inc | RoHS : Not Compliant | 10 : $320.07999 25 : $314.56 50 : $304.63
|
| 3
 |
57HS22-04A16N
| Grayhill Inc | RoHS : Not Compliant | 10 : $248.64 25 : $243.84 50 : $243.81
|
| 2
 |
57HS22-02-2-03N
| Grayhill Inc | RoHS : Not Compliant | 10 : $264.88 25 : $259.37 50 : $253.85001
|
| 1
 |
 RS | HS22F500B
| Sola/Hevi-Duty | TRANSFORMER; INDUSTRIAL CONTROL; 0.500KVA 240X480-24/48 BB | | 10
 |
57HS22-02-2-07N
| Grayhill Inc | SWITCH, ROTARY RoHS : Compliant | | 10
 |
LHS22
| IKO International Inc | L-BALL | | 3
 |
HS22F750B
| Sola/Hevi-Duty | TRANSFORMER; INDUSTRIAL CONTROL; 0.750KVA 240X480-24/48 BB | | 2
 |
HS228
| Hubbell Wiegmann | N1 HNGD WIREWAY 2X2X96 CRBN STL-GRY | | 1
 |
MHS2-20D
| SMC CYLINDERS | PNEUMATIC ACTUATOR, GRIPPER, 2-FINGER, 20MM, MHS SERIES | | 1
 |
57HS22-06-1-16N-C (57HS22-06A16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 06, POLES/DECK: 1, POSITIONS/POLE: 16, CON | | 0
 |
57HS22-03-1-16N-F (57HS22-03B16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 03, POLES/DECK: 1, POSITIONS/POLE: 16, CON | 10 : $233.12 50 : $216.8 100 : $209.81
|
| 0
 |
57HS22-01-1-16N-C (57HS22-01A16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 01, POLES/DECK: 1, POSITIONS/POLE: 16, CON | 10 : $144.11 20 : $135.46 30 : $131.14
|
| 0
 |
57HS22-08-1-16N-C (57HS22-08A16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 08, POLES/DECK: 1, POSITIONS/POLE: 16, CON | | 0
 |
57HS22-02-1-16N-C (57HS22-02A16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 02, POLES/DECK: 1, POSITIONS/POLE: 16, CON | 10 : $226.75 20 : $210.87 30 : $204.07
|
| 0
 |
57HS22-08-1-16S-C (57HS22-08A16S)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 08, POLES/DECK: 1, POSITIONS/POLE: 16, CON | | 0
 |
57HS22-01-1-16S-F (57HS22-01B16S)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 01, POLES/DECK: 1, POSITIONS/POLE: 16, CON | 10 : $154.65 20 : $145.37 30 : $140.73
|
| 0
 |
57HS22-01-1-16N-F (57HS22-01B16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 01, POLES/DECK: 1, POSITIONS/POLE: 16, CON | 10 : $189.08 20 : $175.84 30 : $170.17
|
| 0
 |
57HS22-02-1-16N-F (57HS22-02B16N)
| Grayhill Inc | ROTARY SWITCH, 22.5 DEG, # OF DECKS: 02, POLES/DECK: 1, POSITIONS/POLE: 16, CON | 10 : $196.43 20 : $184.64 30 : $178.75
|
| 0
 |
 Microchip Technology Inc | HS2222A
| Microchip Technology Inc | Small-Signal BJT _ UB, Projected EOL: 2049-02-05 RoHS : Compliant | | 0
 |
HS2222ATX
| Microchip Technology Inc | Small-Signal BJT _ UB, Projected EOL: 2049-02-05 RoHS : Compliant | | 0
 |
HS2222A/TR
| Microchip Technology Inc | Small-Signal BJT _ UB, Projected EOL: 2049-02-05 RoHS : Compliant | | 0
 |
HS2222ATX/TR
| Microchip Technology Inc | Small-Signal BJT _ UB, Projected EOL: 2049-02-05 RoHS : Compliant | | 0
 |
 Bisco Industries | HS2222A
| ACTIVE COMPNTS/DIODES | | | 2
 |
 Rochester Electronics | IRLHS2242TRPHRXTMA1
| Infineon Technologies AG | IRLHS2242PbF - HEXFET Power MOSFET RoHS : Compliant | 10,000 : $8.76 1,000 : $9.31 500 : $9.86 100 : $10.4 25 : $10.95
|
| 2,432
 |
HS2240P.C
| Semtech Corporation | HotSwitch, 22V, 3.1A eFuse with SurgeSwitch Protection, 40A Ipp RoHS : Compliant | 10,000 : $1.51 1,000 : $1.61 500 : $1.7 100 : $1.8 25 : $1.89
|
| 18,000
 |
 Coilcraft Direct | 1008HS-221TGRC
| Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free R RoHS : Compliant | 1 : $1.12 200 : $0.91 500 : $0.68 1,000 : $0.46 2,000 : $0.3 4,000 : $0.26
|
| 8,000
 |
0805HS-221TJLC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant | 1 : $1.06 200 : $0.87 500 : $0.65 1,000 : $0.45 2,000 : $0.3 4,000 : $0.25
|
| 2,810
 |
0805HS-221TGLC
| Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant | 1 : $1.34 200 : $1.09 500 : $0.81 1,000 : $0.55 2,000 : $0.36 4,000 : $0.3
|
| 2,810
 |
0805HS-220TJLC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant | 1 : $1.06 200 : $0.87 500 : $0.65 1,000 : $0.45 2,000 : $0.3 4,000 : $0.25
|
| 1,911
 |
1008HS-221TGLC
| Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant | 1 : $1.34 200 : $1.09 500 : $0.81 1,000 : $0.55 2,000 : $0.36 4,000 : $0.3
|
| 1,872
 |
0805HS-221TGRC
| Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant | 1 : $1.12 200 : $0.91 500 : $0.68 1,000 : $0.46 2,000 : $0.3 4,000 : $0.26
|
| 1,600
 |
0805HS-220TGLC
| Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant | 1 : $1.34 200 : $1.09 500 : $0.81 1,000 : $0.55 2,000 : $0.36 4,000 : $0.3
|
| 1,600
 |
1008HS-221TJLC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant | 1 : $1.06 200 : $0.87 500 : $0.65 1,000 : $0.45 2,000 : $0.3 4,000 : $0.25
|
| 1,564
 |
1008HS-220TJLC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant | 1 : $1.06 200 : $0.87 500 : $0.65 1,000 : $0.45 2,000 : $0.3 4,000 : $0.25
|
| 1,505
 |
0805HS-220TGRC
| Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant | 1 : $1.12 200 : $0.91 500 : $0.68 1,000 : $0.46 2,000 : $0.3 4,000 : $0.26
|
| 0
 |
0805HS-221TJRC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant | 1 : $0.89 200 : $0.72 500 : $0.54 1,000 : $0.37 2,000 : $0.26 4,000 : $0.21
|
| 0
 |
1008HS-221TFLC
| Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS RoHS : Compliant | | 0
 |
1008HS-221TJRC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, Halogen-Free RoHS : Compliant | 1 : $0.89 200 : $0.72 500 : $0.54 1,000 : $0.37 2,000 : $0.26 4,000 : $0.21
|
| 0
 |
1008HS-220TJRC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, Halogen-Free RoHS : Compliant | 1 : $0.89 200 : $0.72 500 : $0.54 1,000 : $0.37 2,000 : $0.26 4,000 : $0.21
|
| 0
 |
0805HS-220TJRC
| Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant | 1 : $0.89 200 : $0.72 500 : $0.54 1,000 : $0.37 2,000 : $0.26 4,000 : $0.21
|
| 0
 |
 TME | LQG15HS22NJ02D
| Murata Manufacturing Co Ltd | Inductor: air coil; SMD; 0402; 22nH; 350mA; R: 0.42Ω; ±5%; LQG; 180mm RoHS : Compliant | 10,000 : $0.011 5,000 : $0.017 100 : $0.0211 10 : $0.034 2 : $0.085 1 : $0.09
|
| 11,537
 |
62HS22-H0-020C
| Grayhill Inc | Encoder: incremental RoHS : Compliant | | 14
 |
57HS22-01-2-08S
| Grayhill Inc | Switch: rotary RoHS : Compliant | | 10
 |
E5003HS22T2
| TE Connectivity | Resistor: thick film | | 10
 |
57HS22-06-1-12N
| Grayhill Inc | Switch: rotary; Pos: 12; on panel; Leads: for soldering RoHS : Compliant | 3 : $278.63 2 : $283.84 1 : $330.12
|
| 4
 |
E3004HS22P1
| TE Connectivity | Resistor: thick film | | 3
 |
57HS22-01-2-05S
| Grayhill Inc | Switch: rotary; Pos: 5; on panel; Leads: for soldering; 53 | | 3
 |
57HS22-05-1-12N
| Grayhill Inc | Switch: rotary; Pos: 12; on panel; Leads: for soldering RoHS : Compliant | 3 : $339.71 2 : $361.29 1 : $429.47
|
| 3
 |
57HS22-01-2-04S
| Grayhill Inc | Switch: rotary; Pos: 4; DP4T; on panel; Leads: for soldering; 53 RoHS : Compliant | | 3
 |
57HS22-04A16N
| Grayhill Inc | Switch: rotary; Pos: 16; on panel; Leads: for soldering | | 2
 |
57HS22-01-7-02N
| Grayhill Inc | Switch: rotary; Pos: 2; on panel; Leads: for soldering RoHS : Compliant | | 2
 |
FBMJ1608HS220NTW
| TAIYO YUDEN | Ferrite: bead; SMD; 1A; 0603; R: 4mΩ; ±30%; Z: 22Ω; FB; -40÷125°C RoHS : Compliant | | 0
 |
LQG15HS22NG02J
| Murata Manufacturing Co Ltd | Inductor: air coil; SMD; 0402; 22nH; 350mA; R: 0.42Ω; ±2%; LQG; 330mm RoHS : Compliant | | 0
 |
HS2222A/TR
| Microchip Technology Inc | Transistor: PNP; bipolar | | 0
 |
MHS222G04
| TE Connectivity | Switch: slide; Pos: 2; DPDT; ON-ON; THT; Leads: for PCB; 16x6.7x7.5mm | 560 : $3.84 250 : $4.04 100 : $4.36 60 : $4.58 50 : $4.66 30 : $4.9
|
| 0
 |
 Ameya Holding Limited | FBMJ1608HS220NT8
| TAIYO YUDEN | RoHS : Compliant | | 4,000
 |
 ComSIT USA | GL8HS22
| Sharp Microelectronics of the Americas | LED LAMP Single Color LED, Sunset Orange, Diffused, 5mm RoHS : Not Compliant | | 750
 |
 Interstate Connecting Components | 440HS228M1710-2KT2
| Glenair Inc | | | 0
 |
440HS227ZR2306M
| Glenair Inc | 38999 B/S SZ 23 | | 0
 |
440HS228M1722-2KT2-63
| Glenair Inc | | | 0
 |
440HS228M1508-2K
| Glenair Inc | EMI/RFI TINEL-LOCK RING ADPTR | | 0
 |
440HS228M1706-2KT2
| Glenair Inc | | | 0
 |
440HS228M2512-2KT2
| Glenair Inc | | | 0
 |
440HS228M1108-3KT2-63
| Glenair Inc | | | 0
 |
627HS228GB413
| Glenair Inc | STRAIN RELIEF/CLAMPS | | 0
 |
440HS228M1510-2KT2
| Glenair Inc | BNDING BCKSHLL W/ SHRNK BT | | 0
 |
440HS228M1912-2KT2
| Glenair Inc | | | 0
 |
440HS227NF2311K-63
| Glenair Inc | | | 0
 |
440HS228M1308-2KT2
| Glenair Inc | | | 0
 |
440HS228M1308-3KT2
| Glenair Inc | | | 0
 |
440HS227ZR0906K-63
| Glenair Inc | 38999 BACKSHELL SZ 09 | | 0
 |
440HS228M1508-2KT2
| Glenair Inc | EMI/RFI TINEL-LOCK RING ADPTR | | 0
 |
 Powell Electronics | E5003HS22T2
| TE Connectivity | SENSOR E5003HS22T2 | | 7
 |
E3004HS22P1
| TE Connectivity | SENSOR E3004HS22P1 | | 2
 |
A8003HS22P1
| TE Connectivity | SENSOR A8003HS22P1 | 600 : $10.59 1,000 : $10.12 2,500 : $9.97 5,000 : $9.51
|
| 1
 |
 Richardson RFPD | HS2240P.C
| Semtech Corporation | HotSwitch, 22V, 3.1A eFuse, 40A Ipp RoHS : Not Compliant | | 0
 |
PHS225MLP3560QE4
| KEMET Corporation | PHS225MLP3560QE4 RoHS : Not Compliant | | 0
 |
 Rutronik | V0603MHS22NR
| Littelfuse Inc | VC 0603 DC=9V CL=30V RoHS : Compliant | 4,000 : $0.2019 8,000 : $0.175 12,000 : $0.1733
|
| 84,000
 |
 Chip 1 Exchange | BKP1005HS221-T
| TAIYO YUDEN | INSTOCK RoHS : Compliant | | 60,000
 |
LQG15HS22NJ02D
| | INSTOCK | | 36,524
 |
L-KLS7-HS22L01
| | INSTOCK | | 21,199
 |
V0603MHS22NH
| Littelfuse Inc | INSTOCK RoHS : Compliant | | 8,313
 |
HS2206ENS
| Littelfuse Inc | INSTOCK | | 6,240
 |
1008HS-221TJBC
| Coilcraft Inc | INSTOCK RoHS : Not Compliant | | 2,083
 |
MHS222G04
| TE Connectivity | INSTOCK | | 2,013
 |
1008HS-221TJBC
| Coilcraft Inc | INSTOCK RoHS : Not Compliant | | 1,950
 |
1008HS-221TJBC
| | INSTOCK | | 1,950
 |
V0402MHS22NR
| | INSTOCK | | 901
 |
 Braemac Americas-Symmetry | HS2240P.C
| Semtech Corporation | HotSwitch, 22V, 3.1A eFuse, 40A Ipp | | 0
 |
AISC-1210HS-220K-T2
| Abracon Corporation | RoHS : Compliant | | 0
 |
 Component Electronics, Inc | SLH-S220C
| Materials Mag!c | IN STOCK SHIP TODAY | | 2,000
 |
V0603MHS22NH
| Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $0.33 100 : $0.38 1 : $0.5
|
| 785
 |
LQG15HS22NJ02D
| Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $0.05 100 : $0.06 1 : $0.08
|
| 200
 |
HS22N22C022
| Hughes Network Systems LLC | IN STOCK SHIP TODAY | 1,000 : $0.5 100 : $0.58 1 : $0.77
|
| 123
 |
MHS223
| TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $1.0 100 : $1.15 1 : $1.54
|
| 15
 |
 DB Roberts | FHS-223-8
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 47
 |
FHS-223-20
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-223-10
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-223-12
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-223-16
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-223-24
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-223-14
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
 FDH Electronics | HS22N22C022
| Aptiv PLC | Connector Acc | 1 : $93.0 5 : $93.0 10 : $82.059 25 : $77.5 50 : $77.5 100 : $74.732 250 : $72.155 500 : $72.155 1,000 : $69.75 2,500 : $69.75 10,000 : $67.5
|
| 0
 |
 Master Electronics | MHS22204
| TE Connectivity | Switch Slide ON None ON DPDT Top Slide 0.3A 125VAC PC Pins Bracket Mount/PCB Through Hole RoHS : Compliant | 7,840 : $1.18 5,040 : $1.21 2,800 : $1.5 1,120 : $1.87 560 : $1.95 250 : $2.03 100 : $2.13 10 : $2.62
|
| 427
 |
57HS22-04B16N
| Grayhill Inc | The 57HS22-04B16N is a military-qualified 4-deck rotary switch with 1 pole and 16 non-shorting positions per deck. RoHS : Compliant | 10 : $192.25 8 : $196.18 5 : $264.32 3 : $357.93 1 : $358.83
|
| 4
 |
HMTSW-108-07-H-S-225
| Samtec Inc | RoHS : Compliant | 7,500 : $0.718 5,000 : $0.72 2,500 : $0.932 1,000 : $1.057 500 : $1.418 250 : $1.484 100 : $1.532 25 : $1.827
|
| 0
 |
MTSW-111-23-H-S-225
| Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant | 7,500 : $0.864 5,000 : $0.867 2,500 : $1.096 1,000 : $1.3 500 : $1.463 250 : $1.531 100 : $1.581 25 : $1.885
|
| 0
 |
MTLW-110-07-H-S-228
| Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant | 7,500 : $1.19 5,000 : $1.23 2,500 : $1.59 1,000 : $1.78 500 : $2.46 250 : $2.57 50 : $2.77 10 : $3.31
|
| 0
 |
TW-03-02-H-S-220-080
| Samtec Inc | RoHS : Compliant | 7,500 : $0.533 5,000 : $0.548 2,500 : $0.726 1,000 : $0.829 500 : $1.149 250 : $1.203 25 : $1.481
|
| 0
 |
57HS22-02-4-04N
| Grayhill Inc | Switch Rotary 4P4T 4 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant | 10 : $215.27 8 : $219.66 5 : $295.96 3 : $400.79 1 : $401.79
|
| 0
 |
MTSW-110-09-H-S-220-RA
| Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant | 7,500 : $1.19 5,000 : $1.23 2,500 : $1.49 1,000 : $1.71 500 : $1.86 250 : $1.92 100 : $2.01 10 : $2.47
|
| 0
 |
TW-04-07-H-S-220-265
| Samtec Inc | RoHS : Compliant | 7,500 : $0.851 5,000 : $0.853 2,500 : $1.137 1,000 : $1.314 500 : $1.768 250 : $1.821 100 : $1.906 25 : $2.346
|
| 0
 |
HMTSW-136-08-H-S-225-NA
| Samtec Inc | RoHS : Compliant | 5,000 : $2.59 2,500 : $2.62 1,000 : $3.42 500 : $4.25 250 : $5.0 100 : $5.22 25 : $6.06 5 : $7.23
|
| 0
 |
MTMM-114-06-H-S-220
| Samtec Inc | RoHS : Compliant | 5,000 : $1.55 2,500 : $2.23 1,000 : $3.07 500 : $3.44 250 : $3.87 100 : $3.99 50 : $4.17 5 : $5.13
|
| 0
 |
HS2206AS
| Littelfuse Inc | Detect RoHS : Compliant | 5,000 : $0.885 3,750 : $0.903 2,500 : $1.283 1,250 : $2.424
|
| 0
 |
R7551HS22T2
| TE Connectivity | MOQ Reduction RoHS : Compliant | 1,000 : $44.7 750 : $45.62 500 : $67.01 250 : $131.2
|
| 0
 |
MC152ST381BKBDWHS22AUSO
| Phoenix Contact | RoHS : Compliant | 7,500 : $1.25 5,000 : $1.27 2,500 : $1.3 1,000 : $1.32 500 : $1.46 250 : $1.48 100 : $1.51 25 : $1.78
|
| 0
 |
A8003HS22P1
| TE Connectivity | MOQ Reduction RoHS : Compliant | 600 : $9.22 450 : $9.41 300 : $13.37 150 : $25.26
|
| 0
 |
 Neutron USA | 62HS22-H9-020C
| Grayhill Inc | Encoders Encoder, High Torque, 22.5-deg; or 16 positions, pushbutton, 2.0in. cable, connector RoHS : Compliant | | 50
 |
62HS22-H9-040C
| Grayhill Inc | Encoders Encoder High Torque 22.5deg or 16Pos RoHS : Compliant | | 20
 |
57HS22-01B16N
| Grayhill Inc | Rotary Switches 57HS22-01-1-16N-F | | 16
 |
57HS22-05-1-12N
| Grayhill Inc | Switch Rotary SP12T 12 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant | | 12
 |
57HS22-01-2-05S
| Grayhill Inc | Switch Rotary DP5T 5 Flatted Shaft Solder Lug 0.25A 30VDC | | 12
 |
57HS22-03-1-14N
| Grayhill Inc | Switch Rotary SP14T 14 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant | | 9
 |
57HS22-04-2-08N
| Grayhill Inc | Switch Rotary DP8T 8 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant | | 9
 |
57HS22-02-2-06N
| Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp | | 7
 |
57HS22-01-4-04N
| Grayhill Inc | SWITCH ROTARY 4POS 250MA 115V RoHS : Compliant | | 6
 |
57HS22-04B16N
| Grayhill Inc | Switch Rotary SP16T 16 Flatted Shaft Solder Lug 0.25A 30VDC Automotive | | 4
 |
57HS22-01-1-11N
| Grayhill Inc | Rotary Switches 57HS22-01-1-11N | | 4
 |
57HS22-01-1-15N
| Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant | | 4
 |
57HS22-01-2-04S
| Grayhill Inc | Switch Rotary DP4T 4 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant | | 3
 |
57HS22-02-2-03N
| Grayhill Inc | Switch Rotary DP3T 3 Flatted Shaft Solder Lug 0.25A 30VDC RoHS : Compliant | | 1
 |
57HS22-04-1-10N
| Grayhill Inc | SWITCH ROTARY 10POS 250MA 115V RoHS : Compliant | | 0
 |
 Pasternack Enterprises US | PE3C0051/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-24 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-195 coax with double heatshrink. | 1 : $86.99 25 : $82.64 50 : $78.29 100 : $74.81
|
| 7,724
 |
PE3W01371/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly N male to SMA male right angle low loss cable 24 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male right angle low loss cable 24 inch length using LMR-240 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle SMA cable connection on the other. Our low loss N type to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01371/HS2-24 can also be known as a low loss type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3W01371/HS2-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01371/HS2-24 can also be used in the other direction and will be right angle SMA male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male right angle low loss cable 24 inch length using LMR-240 coax with double heatshrink. | 1 : $139.99 25 : $132.99 50 : $125.99 100 : $120.39
|
| 4,640
 |
PE3C0108/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and type N bulkhead cable connection on the other. Our TNC to N type cable assemblies have a male gender on end 1 and female on end 2. This TNC to N type cable is a male to female coax assembly, PE3C0108/HS2-24, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to type N jack cable assembly PE3C0108/HS2-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-24 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. | 1 : $115.99 25 : $110.19 50 : $104.39 100 : $99.75
|
| 1,874
 |
PE3C1609/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Plug to SMA Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 24 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 24 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-24 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-24 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 24 inch length using LMR-195 coax with double heatshrink. | 1 : $94.99 25 : $90.24 50 : $85.49 100 : $81.69
|
| 1,034
 |
PE3C6147/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to MHV Male Cable 24 Inch Length Using RG58 Coax with Double HeatShrink., Radio frequency assembly BNC male to MHV male cable 24 inch length using RG58 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to MHV male cable 24 inch length using RG58 coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and MHV cable connection on the other. Our BNC to MHV cable assemblies have a male gender on end 1 and male on end 2. PE3C6147/HS2-24 can also be known as a BNC plug to MHV plug cable assembly and will be shipped same-day as it is purchased. BNC plug to MHV plug cable assembly PE3C6147/HS2-24 is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency BNC male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6147/HS2-24 can also be used in the other direction and will be MHV male to BNC male cable assembly if the opposite connectivity is required. BNC plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MHV cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to MHV male cable 24 inch length using RG58 coax with double heatshrink. | 1 : $119.99 25 : $113.99 50 : $107.99 100 : $103.19
|
| 936
 |
PE3C6147/HS2-200CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to MHV Male Cable 200CM Length Using RG58 Coax with Double HeatShrink., Radio frequency assembly BNC male to MHV male cable 200CM length using RG58 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to MHV male cable 200CM length using RG58 coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and MHV cable connection on the other. Our BNC to MHV cable assemblies have a male gender on end 1 and male on end 2. PE3C6147/HS2-200CM can also be known as a BNC plug to MHV plug cable assembly and will be shipped same-day as it is purchased. BNC plug to MHV plug cable assembly PE3C6147/HS2-200CM is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency BNC male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6147/HS2-200CM can also be used in the other direction and will be MHV male to BNC male cable assembly if the opposite connectivity is required. BNC plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MHV cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to MHV male cable 200CM length using RG58 coax with double heatshrink. | 1 : $125.99 25 : $119.69 50 : $113.39 100 : $108.35
|
| 936
 |
PE3C7527/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 24 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-24 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-24 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-24 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. | 1 : $161.99 10 : $155.51 25 : $149.03 100 : $142.55
|
| 460
 |
PE3W00013/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 24 inch length using LMR-400 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 24 inch length using LMR-400 coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00013/HS2-24 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W00013/HS2-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS2-24 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 24 inch length using LMR-400 coax with Times Microwave components with double heatshrink. | 1 : $103.99 25 : $98.79 50 : $93.59 100 : $89.43
|
| 356
 |
PE3C1041/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to TNC Male Right Angle Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 24 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 24 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-24 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1041/HS2-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-24 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 24 inch length using PE-P142LL coax with double heatshrink. | 1 : $409.99 25 : $389.49 50 : $368.99 100 : $352.59
|
| 348
 |
PE3C2887/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female Right Angle to SMA Male Cable 24 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 24 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 24 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-24, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-24 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-24 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 24 inch length using PE-P047 coax with double heatshrink. | 1 : $237.99 25 : $226.09 50 : $214.19 100 : $204.67
|
| 260
 |
PE3C6004/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-200 Coax with Double HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-200 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-200 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6004/HS2-24 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C6004/HS2-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6004/HS2-24 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-200 coax with double heatshrink. | 1 : $125.99 25 : $119.69 50 : $113.39 100 : $108.35
|
| 116
 |
PE3C6335/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male Right Angle to UHF Female Low Loss Cable 24 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 24 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 24 inch length using LMR-195 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-24 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-24 can also be used in the other direction and will be UHF female to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 24 inch length using LMR-195 coax with double heatshrink. | 1 : $125.99 25 : $119.69 50 : $113.39 100 : $108.35
|
| 90
 |
PE345/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE345/HS2-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-24 can also be used in the other direction and will be right angle N type male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 24 inch length using PE-P142LL coax with double heatshrink. | 1 : $439.99 25 : $417.99 50 : $395.99 100 : $378.39
|
| 4
 |
PE35568/HS2-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMB Jack Cable 24 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly SMA male to SMB jack cable 24 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack cable 24 inch length using RG316-DS coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has male gender on end 1 and jack on end 2. PE35568/HS2-24 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB female cable assembly PE35568/HS2-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35568/HS2-24 RF cable are available on our downloadable PDF datasheet.PE35568/HS2-24 can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 1 : $103.99 25 : $98.79 50 : $93.59 100 : $89.43
|
| 0
 |
PE3W06854/HS2-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 24 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 24 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-24, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-24 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with double heatshrink. | 1 : $125.99 25 : $119.69 50 : $113.39 100 : $108.35
|
| 0
 |
 Sager | MTSW-111-23-H-S-225
| Samtec Inc | Headers & Wire Housings RoHS : Compliant | | 0
 |
62HS22-H9-040S
| Grayhill Inc | Encoders 62HS22-H9-040S RoHS : Compliant | 25 : $50.2 50 : $49.45 175 : $42.8
|
| 0
 |
57HS22-02-2-05N
| Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant | 10 : $179.88 20 : $177.19 40 : $169.6
|
| 0
 |
MHS22204
| TE Connectivity | Slide Switches DPDT ON-NON-ON TOP T/H SLIDE SWITCH | | 0
 |
57HS22-02-4-02N
| Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant | | 0
 |
MTLW-110-07-H-S-228
| Samtec Inc | Headers & Wire Housings RoHS : Compliant | | 0
 |
57HS22-01-4-03N
| Grayhill Inc | Rotary Switches Rotary Switch, Military, shaft/panel seal, 22.5°, 1 deck, 4 pole/deck, 3 position/pole, non-shorting RoHS : Compliant | | 0
 |
57HS22-04-1-10N
| Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant | | 0
 |
62HS22-H9-100S
| Grayhill Inc | Encoders 62HS22-H9-100S RoHS : Compliant | 25 : $52.82 50 : $52.03 150 : $45.03
|
| 0
 |
57HS22-01-1-16S-C
| Grayhill Inc | Rotary Switches RoHS : Compliant | | 0
 |
57HS22-03-1-15N
| Grayhill Inc | Rotary Switches Rotary Switch, Military, shaft/panel seal, 22.5°, 3 deck, 1 pole/deck, 15 position/pole, non-shorting RoHS : Compliant | | 0
 |
57HS22-04-1-14N
| Grayhill Inc | Rotary Switches Rotary Switch, Military, shaft/panel seal, 22.5°, 4 deck, 1 pole/deck, 14 position/pole, non-shorting RoHS : Compliant | | 0
 |
57HS22-04-1-16N-C
| Grayhill Inc | Rotary Switches RoHS : Compliant | | 0
 |
57HS22-07-2-07N
| Grayhill Inc | Rotary Switches Rotary Switch, Military, shaft/panel seal, 22.5°, 7 deck, 2 pole/deck, 7 position/pole, non-shorting RoHS : Compliant | | 0
 |
62HS22-H0-040C
| Grayhill Inc | Encoders 62HS22-H0-040C RoHS : Compliant | 25 : $51.3 50 : $50.54 175 : $43.74
|
| 0
 |
 Vyrian | BK1608HS220-TV
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 1.5A, 2 Pin(s) RoHS : Compliant | | 17,435
 |
62HS22-H9-020C
| Grayhill Inc | Rotary Position Encoder, Single, 2 Channels RoHS : Compliant | | 15,634
 |
BKP2125HS221-TV
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | | 12,710
 |
BKP1005HS221-T
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | | 12,600
 |
BKP1005HS221-TV
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | | 12,480
 |
BKP2125HS221-T
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | | 10,467
 |
BK1608HS220-T
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 1.5A, 2 Pin(s) RoHS : Compliant | | 10,408
 |
V0402MHS22FR
| Littelfuse Inc | Varistor, 9V, Surface Mount RoHS : Compliant | | 9,600
 |
TMUXHS221EVM
| Texas Instruments | | | 8,729
 |
V0603MHS22NA
| Littelfuse Inc | Varistor, Surface Mount RoHS : Compliant | | 7,787
 |
NL3HS2222MUTBG
| onsemi | DPDT, 1 Func, 2 Channel RoHS : Compliant | | 6,100
 |
KUSBHS2/256
| Kingston Technology Company | | | 5,763
 |
PTMUXHS221NKGR
| Texas Instruments | Differential Multiplexer, 1 Func, 2 Channel, PQCC10 RoHS : Not Compliant | | 3,716
 |
BKP1005HS221-T8
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | | 711
 |
LFBK1608HS220-T
| TAIYO YUDEN | Ferrite Chip, 1 Function(s), 1.5A, 2 Pin(s) RoHS : Compliant | | 647
 |
 Win Source Electronics | LQG15HS22NJ02D
| Murata Manufacturing Co Ltd | FIXED IND 22NH 350MA 420 MOHM RoHS : Compliant | 32,970 : $0.0091 24,755 : $0.0101 19,235 : $0.0104 13,890 : $0.0108 9,010 : $0.0111 3,680 : $0.0136
|
| 508,800
 |
TMUXHS221NKGR
| Texas Instruments | IC SWITCH DPDT X 1 8OHM 10UQFN RoHS : Compliant | 1,010 : $0.2981 755 : $0.3325 585 : $0.3439 425 : $0.3554 275 : $0.3668 115 : $0.4471
|
| 27,140
 |
IRLHS2242TRPBF
| Infineon Technologies AG | MOSFET P-CH 20V 15A 2X2 PQFN RoHS : Compliant | 1,920 : $0.1752 1,435 : $0.1954 1,110 : $0.2022 805 : $0.2089 520 : $0.2156 215 : $0.2628
|
| 12,000
 |
NL3HS2222MUTBG
| onsemi | IC USB 2.0 SWITCH DPDT UQFN10 RoHS : Compliant | 275 : $1.4212 205 : $1.5851 160 : $1.6398 115 : $1.6943 75 : $1.7491 35 : $2.1316
|
| 7,700
 |