 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
HS2H-BB-R 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
 TME | HS25M 15R J M303 | The Heico Companies LLC | Resistor: wire-wound; 15Ω; screw; 25W; ±5%; 100ppm/°C; solder lugs |
| 297 | |
| HS200 1R F | Arcol | Resistor: wire-wound; 1Ω; screw; 200W; ±1%; 1.9kV; 89.7x72.5x41.8mm |
| 16 | ||
| 1HS25 | Honeywell Sensing and Control | Microswitch SNAP ACTION; SPDT; ON-(ON); HS; -54÷121°C; 6.12N |
| 8 | ||
| 57HS22-03-2-08N | Grayhill Inc | Switch: rotary; Pos: 8; Leads: for soldering; Rcont max: 50mΩ RoHS : Compliant |
| 7 | ||
| RHS2K5E | Ohmite Mfg Co | Potentiometer: shaft; 2.5kΩ; single turn; 25W; 6.35mm; wirewound RoHS : Compliant |
| 1 | ||
| 35HS/250 | Beta Electric | Cold chisel; for working at height,flat; L: 250mm |
| 0 | ||
| R88M-GP10030H-S2 | OMRON Corporation | Motor: servo motor; with incremental encoder; 100W; 200VAC; G |
| 0 | ||
| HF32FA/012-HS2 | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPST-NO; 5A; 5A/250VAC; THT RoHS : Compliant |
| 0 | ||
| HF32FA/048-HS2G | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 48VDC; SPST-NO; 5A; 5A/250VAC; THT RoHS : Compliant |
| 0 | ||
| HS200 0R82 F | Arcol | Resistor: wire-wound; 820mΩ; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 0 | ||
| HS200 50R F | Arcol | Resistor: wire-wound; 50Ω; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 0 | ||
| HS2DFS | Taiwan Semiconductor | Diode: rectifying; SMD; 200V; 2A; 50ns; SOD128; Ufmax: 1V; reel,tape RoHS : Compliant |
| 0 | ||
| HS2JAH | Taiwan Semiconductor | Diode: rectifying; SMD; 600V; 1.5A; 75ns; SMA; Ufmax: 1.7V; reel,tape RoHS : Compliant |
| 0 | ||
LQG15HS2N0C02D.jpg) | Murata Manufacturing Co Ltd | Inductor: air coil; SMD; 0402; 2nH; 900mA; R: 0.09Ω; LQG; 180mm RoHS : Compliant |
| 0 | ||
| 1052HS/240 | Beta Electric | Pliers: adjustable; adjustable; for working at height; 240mm |
| 0 | ||
 ComSIT USA | CHS2411QDG2120094241 | UMS | AVAILABLE EU | 12,089 | ||
 NexGen Digital | LQG15HS27NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 875 | ||
 Richardson RFPD | HS200 100R F | Ohmite Mfg Co | Aluminium Housed Resistors RoHS : Compliant |
| 0 | |
| HS200 470R F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS2005RF | Ohmite Mfg Co | Res Wirewound 5 Ohm 1% 50W/200W ±100ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS200R1J | Ohmite Mfg Co | Res Wirewound 0.1 Ohm 5% 50W/200W ±100ppm/C Alumin RoHS : Compliant |
| 0 | ||
| HS25 10K J | Ohmite Mfg Co | Res Wirewound 10K Ohm 5% 9/25W ±25ppm/C Aluminum H RoHS : Compliant |
| 0 | ||
| HS25 4K7 J | Ohmite Mfg Co | Res Wirewound 4.7K Ohm 5% 9/25W ±25ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS250 4R J | Ohmite Mfg Co | HS250 4R J RoHS : Compliant |
| 0 | ||
| HS250 680R F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Not Compliant |
| 0 | ||
| HS25F10RF200MMM404 | Ohmite Mfg Co | Cable Leaded Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
| HS25M 150R J M303 | Ohmite Mfg Co | HS25M 150R J M303 RoHS : Compliant |
| 0 | ||
| HS200 33R J | Ohmite Mfg Co | Res Wirewound 33 Ohm 5% 50W/200W ±100ppm/C Aluminu RoHS : Compliant |
| 0 | ||
| HS200 R82 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS253K9J | Ohmite Mfg Co | Res Wirewound 3.9K Ohm 5% 9/25W ±25ppm/C Aluminum RoHS : Compliant |
| 0 | ||
| HS255RJ | Ohmite Mfg Co | Res Wirewound 5 Ohm 5% 9/25W ±100ppm/C Aluminum Ho RoHS : Compliant |
| 0 | ||
| HS25E3 150R F M145 | Ohmite Mfg Co | Aluminum Housed Resistors RoHS : Compliant |
| 0 | ||
 Rutronik | LQG15HS27NJ02D | Murata Manufacturing Co Ltd | LQG15HS 27nH 300mA 5% MLT RoHS : Compliant |
| 1,660,000 | |
| LQG15HS2N0S02D | Murata Manufacturing Co Ltd | LQG15HS 2nH 300mA 0,3nH MLT RoHS : Compliant |
| 340,000 | ||
| LQG15HS2N7S02D | Murata Manufacturing Co Ltd | LQG15HS 0,0027uH 0,3A 0,3nH MLT RoHS : Compliant |
| 180,000 | ||
| LQG15HS2N4S02D | Murata Manufacturing Co Ltd | LQG15HS 0,0024uH 0,3A 0,3nH MLT RoHS : Compliant |
| 110,000 | ||
| V0603MHS22NR | Littelfuse Inc | VC 0603 DC=9V CL=30V RoHS : Compliant |
| 12,000 | ||
| LQG15HS2N2B02D | Murata Manufacturing Co Ltd | LQG15HS 0,0022uH 0,9A 0,1nH RoHS : Compliant |
| 10,000 | ||
 Avnet Abacus | LQG15HS2N7S02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N7S02D) RoHS : Compliant | 220,000 | ||
| LQG15HS2N4S02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N4S02D) RoHS : Compliant | 110,000 | |||
| FBMJ1608HS280NT | TAIYO YUDEN | (Alt: FCFBMJ1608HS280NT) RoHS : Compliant | 80,000 | |||
| LQG15HS2N0S02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N0S02D) RoHS : Compliant | 60,000 | |||
| LQG15HS22NG02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS22NG02D) RoHS : Compliant | 10,000 | |||
| LQG15HS22NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS22NJ02D) RoHS : Compliant | 10,000 | |||
| LQG15HS2N2B02D | Murata Manufacturing Co Ltd | Multilayer Inductor 22 nH 90 Milliohms 01nH 6 GHz 900 mA 0402 1005 Metric (Alt: LQG15HS2N2B02D) RoHS : Compliant | 10,000 | |||
| LQG15HS27NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 27 nH 046 ohm 17 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS27NJ02D) RoHS : Compliant | 10,000 | |||
| FBMJ1608HS220NTR | TAIYO YUDEN | (Alt: FCFBMJ1608HS220NTR) RoHS : Compliant | 8,000 | |||
| 57HS22-01-2-04S | Grayhill Inc | Switch Rotary DP4T 4 Flatted Shaft Solder Lug 025A 30VDC (Alt: 57HS22-01-2-04S) RoHS : Compliant | 10 | |||
| FLHS2P008A0 | Amphenol Corporation | Cable Assembly Mini Wire to Board Plug to Free End 2 Ways 25 mm 1 Row 1 m 33 ft (Alt: FLHS2P008A0) RoHS : Compliant | 0 | |||
| 62HS22-H9-020C | Grayhill Inc | High Torque Optical Encoder Panel Mount (Alt: 62HS22-H9-020C) RoHS : Compliant | 0 | |||
| 57HS22-02-2-07N | Grayhill Inc | Switch Rotary DP7T 7 Flatted Shaft Solder Lug 025A 30VDC (Alt: 57HS22-02-2-07N) RoHS : Compliant | 0 | |||
| PHS225MLP3560QE4 | KEMET Corporation | Hybrid Aluminium Electrolytic Capacitor Horizontal Crown SMD 560 F 10 30 63 V 6700 ohm (Alt: PHS225MLP3560QE4) RoHS : Compliant | 0 | |||
| FBMJ1608HS280NTR | TAIYO YUDEN | (Alt: CGHMK107BJ682MA-T) RoHS : Compliant | 0 | |||
 Avnet Asia | HS2J | Taiwan Semiconductor | Diode Fast Switching Rectifier 600V 2A 2-Pin DO-214AA T/R (Alt: HS2J) RoHS : Compliant |
| 27,000 | |
| MMD-06AHS2R2M-X2-IS | Pulse Electronics Corporation | PULMMD-06AHS2R2M-X2-IS CHILISIN INDUCTOR (Alt: MMD-06AHS2R2M-X2-IS) RoHS : Compliant | 0 | |||
| LQG15HS2N4S02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N4S02D) RoHS : Compliant | 0 | |||
| HS2MA | Taiwan Semiconductor | Diode Ultra-Fast Recovery 1000V 1.5A 2-Pin DO-214AC T/R (Alt: HS2MA) RoHS : Compliant | 0 | |||
| LQG15HS22NG02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS22NG02D) RoHS : Compliant | 0 | |||
| CUHS20F30,H3F(B | Toshiba America Electronic Components | Small Signal Schottky Diode, Single, 30 V, 2 A, 470 mV, 10 A, 150 ?C, SOD-323HE, 2 Pins (Alt: CUHS20F30,H3F(B) RoHS : Compliant | 0 | |||
| LQG15HS22NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS22NJ02D) RoHS : Compliant |
| 0 | ||
| LQG15HS2N2B02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N2B02D) RoHS : Compliant |
| 0 | ||
| CUHS20S30,H3F(T | Toshiba America Electronic Components | Diode Schottky 30V 2A 2-Pin SOD-323HE (Alt: CUHS20S30,H3F(T) RoHS : Compliant | 0 | |||
| HS2GA-T | Taiwan Semiconductor | 50ns, 2A, 400V, High Efficient Recovery Rectifier (Alt: HS2GA-T) RoHS : Compliant | 0 | |||
| PESD3V3HS2-SFYL | Nexperia | (Alt: PESD3V3HS2-SFYL) RoHS : Compliant | 0 | |||
| LQG15HS27NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS27NJ02D) RoHS : Compliant | 0 | |||
| LQG15HS2N4B02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N4B02D) RoHS : Compliant |
| 0 | ||
| LQG15HS2N2C02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS2N2C02D) RoHS : Compliant | 0 | |||
| NFG0QHB242HS2D | Murata Manufacturing Co Ltd | (Alt: NFG0QHB242HS2D) RoHS : Compliant | 0 | |||
 Avnet Silica | HS20 | Cirrus Logic | (Alt: HS20) RoHS : Compliant | 0 | ||
| HS2907A | Microchip Technology Inc | Trans GP BJT PNP 06A 3Pin HSOT (Alt: HS2907A) RoHS : Not Compliant | 0 | |||
| HS2-117RH-Q | Renesas Electronics Corporation | (Alt: HS2-117RH-Q) RoHS : Compliant | 0 | |||
| HS2-117EH-Q | Renesas Electronics Corporation | (Alt: HS2-117EH-Q) RoHS : Compliant | 0 | |||
| HI1-0201HS-2 | Renesas Electronics Corporation | (Alt: HI1-0201HS-2) RoHS : Not Compliant | 0 | |||
| PESD3V3HS2-SFYL | Nexperia | ESD Protection Device 4 V DSN0603 2 Pins 33 V 08 pF TrEOS Series (Alt: PESD3V3HS2-SFYL) RoHS : Compliant | 0 | |||
| AAHS298BS-S20B-S | Microchip Technology Inc | (Alt: AAHS298BS-S20B-S) RoHS : Compliant | 0 | |||
| AAHS298BS-S20B-B | Microchip Technology Inc | (Alt: AAHS298BS-S20B-B) RoHS : Not Compliant | 0 | |||
| AAHS298B-S-S20B-S | Microchip Technology Inc | (Alt: AAHS298B-S-S20B-S) RoHS : Compliant | 0 | |||
| AAHS298B-S-S20B-B | Microchip Technology Inc | (Alt: AAHS298B-S-S20B-B) RoHS : Not Compliant | 0 | |||
| HS2-3530ARH/PROTO | Renesas Electronics Corporation | (Alt: HS2-3530ARH/PROTO) RoHS : Compliant | 0 | |||
| AAHS298B-06-4020A-Q | Microchip Technology Inc | (Alt: AAHS298B-06-4020A-Q) RoHS : Compliant | 0 | |||
| AAHS298B-07-4020A-V | Microchip Technology Inc | (Alt: AAHS298B-07-4020A-V) RoHS : Compliant | 0 | |||
| CXB1820-0000-000N0HS240G | Cree, Inc. | XLAMP CXA GEN 2 LIGHT EMITTING DIODE WHITE (Alt: CXB1820-0000-000N0HS240G) RoHS : Compliant | 0 | |||
| AR0130CSSM00SPCAH-S213A-GEVB | onsemi | Evaluation Board AR0130CSSM00SPCA0DRBR 12MP 13 CMOS Image Sensor (Alt: AR0130CSSM00SPCAH-S213A-GEVB) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | WHS2828 | Nipron Co |
| 0 | ||
| AISC-1210HS-2R7K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-8040HS-2R2M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1210HS-220K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1210HS-270K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-8030HS-2R2N-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1210HS-2R2K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-8030HS-2R2M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | HS252R2J | Arcol | RoHS : Compliant | 200 | ||
 Component Electronics, Inc | FHS256X3/16-PH-SS | PennEngineering (PEM) | IN STOCK SHIP TODAY |
| 8,600 | |
| LHS2527-2X25G | Ho Chien Electronics Group Inc | IN STOCK SHIP TODAY | 3,260 | |||
| SLH-S220C | Materials Mag!c | IN STOCK SHIP TODAY | 2,000 | |||
| FHS256X5/16-PH-SS | IN STOCK SHIP TODAY | 950 | ||||
| FHS256X5/16-PH-SS | PennEngineering (PEM) | IN STOCK SHIP TODAY | 900 | |||
| LQG15HS22NJ02D | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 200 | ||
| HS20 | Tridonic Gmbh & Co Kg | IN STOCK SHIP TODAY |
| 50 | ||
| PHS2402 | IN STOCK SHIP TODAY | 50 | ||||
| NKHS2WH-X | Panduit Corp | IN STOCK SHIP TODAY |
| 40 | ||
| LU3X54FT-HS208 | Alcatel-Lucent | IN STOCK SHIP TODAY | 36 | |||
| GF-59-AHS/290 | Gilbert Engineering Company | IN STOCK SHIP TODAY |
| 34 | ||
| MHS223 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
| MHS-233-RA | TE Connectivity | IN STOCK SHIP TODAY |
| 10 | ||
| R88M-W2K010H-S2 | OMRON Corporation | IN STOCK SHIP TODAY |
| 4 | ||
| R88M-W90010H-S2 | OMRON Corporation | IN STOCK SHIP TODAY |
| 3 | ||
 EBV Elektronik | HS2MFSH | Taiwan Semiconductor | Diode High Efficient Recovery Rectifier 1000V 2A 2Pin SOD128 TR (Alt: HS2MFSH) RoHS : Compliant | 84,000 | ||
| CUHS20S40,H3F(T | Toshiba America Electronic Components | Dioden andere als Fotodioden und Leuchtdioden LED SCHOTTKY DIODE (Alt: CUHS20S40,H3F(T) RoHS : Compliant | 9,000 | |||
| HS2MA | Taiwan Semiconductor | Diode UltraFast Recovery 1000V 15A 2Pin DO214AC TR (Alt: HS2MA) RoHS : Compliant | 7,500 | |||
| GWJ9LHS2.4M-C0C7-2+35+13+50AW-1-100-R | ams OSRAM Group | MidPower LEDs MultiColor Tighter wavelength binning with high CRI (Alt: Q65113A4658) RoHS : Compliant | 7,000 | |||
| CUHS20S30,H3F(T | Toshiba America Electronic Components | Diode Schottky 30V 2A 2Pin SOD323HE (Alt: CUHS20S30,H3F(T) RoHS : Compliant | 6,000 | |||
| KRDDLM32.23-GQHS-25-D1G2 | ams OSRAM Group | LED (Alt: Q65113A5717) RoHS : Compliant | 4,000 | |||
| GWJ9LHS2.4M-C0C7-2+35+13+57AW-1-100- | ams OSRAM Group | LED DURIS E 5050 (Alt: Q65113A4659) RoHS : Compliant | 2,000 | |||
| A7602E-H S2-10A6E-Z3118 | SIMCom | Cellular Module EDGE GPRS GSM HSPA LTEFDD LTETDD UMTS 3135V to 44V 30mm x 42mm x 23mm (Alt: A7602E-H S2-10A6E-Z3118) RoHS : Compliant | 0 | |||
| A7600E-H S2-109X2-Z30CZ | SIMCom | LTE Cat 4 Module (Alt: A7600E-H S2-109X2-Z30CZ) RoHS : Compliant | 0 | |||
| A7602E-H S2-10A6E-Z33P3 | SIMCom | LTE CAT 4 module (Alt: A7602E-H S2-10A6E-Z33P3) RoHS : Compliant | 0 | |||
| SIM7600E-H S2-10A0L-Z1W8N | SIMCom | LTE CAT4 MODULE LCC (Alt: SIM7600E-H S2-10A0L-Z1W8N) RoHS : Compliant | 0 | |||
| SIM7600G-H S2-1097D-Z31NY | SIMCom | Cellular Module GSM LTEFDD LTETDD WCDMA 34V to 42V 30mm x 30mm x 29mm (Alt: SIM7600G-H S2-1097D-Z31NY) RoHS : Compliant | 0 | |||
| IMEI_A7602E-H S2-10DP6-Z326G | SIMCom | LTE Cat 4 module (Alt: A7602E-H S2-10DP6-Z326G) RoHS : Compliant | 0 | |||
| IMEI_A7602E-H S2-10A6E-Z30P1 | SIMCom | Cellular Module EDGE GPRS GSM LTEFDD LTETDD UMTS 3135V to 44V 30mm x 42mm x 23mm (Alt: IMEI_A7602E-H S2-10A6E-Z30P1) RoHS : Compliant | 0 | |||
| LRTBGVSR-V1V2-JW+BABB-DR+T4U1-HS-20-S | ams OSRAM Group | OSIRE E3635 Color dom 626 nm red dom 528 nm true green dom 465 nm blue Auto TR (Alt: Q65113A3220) RoHS : Compliant | 0 | |||
 FDH Electronics | 327HS255Z11315W | Glenair Inc | Backshells & Ac |
| 50 | |
| 327HS269XM25-7 | Glenair Inc | Connector Acc |
| 28 | ||
| 327HS255Z11113W | Glenair Inc | Connector Acc |
| 18 | ||
| 327HS255BMT1719W | Glenair Inc | Connector Acc |
| 17 | ||
| 327HS255BMT1519W | Glenair Inc | Connector Acc |
| 11 | ||
| HS24-A-0004 | Smiths Interconnect | Connector Acc |
| 9 | ||
| 327HS255BMT1923W | Glenair Inc | Connector Acc |
| 8 | ||
| 327HS255BMT1315W | Glenair Inc | Connector Acc |
| 7 | ||
| 447HS250M1103 | Glenair Inc | Backshells & Ac | 5 | |||
| G9263HS2328HNF4 | Glenair Inc | Backshells & Ac | 5 | |||
| HS25 5RF | Ohmite Mfg Co | Resistor |
| 2 | ||
| 327HS255Z11115W | Glenair Inc | Backshells & Ac |
| 2 | ||
| 327HS255BMT2125W | Glenair Inc | Connector Acc |
| 2 | ||
| 712HS277NF2120-31 | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 1 | |||
| 327HS255BMT0913W | Glenair Inc | Connector Acc |
| 1 | ||
 Flip Electronics | NL3HS2222MUTBG | onsemi | Stock RoHS : Compliant | 73,965 | ||
| S35HS256TFANHI213 | Infineon Technologies AG | Stock | 17,500 | |||
| S35HS256TFANHI210 | Infineon Technologies AG | Stock | 16,900 | |||
| S28HS256TGABHM010 | Infineon Technologies AG | Stock | 338 | |||
 Neutron USA | 62HS22-H9-020C | Grayhill Inc | Encoders Encoder, High Torque, 22.5-deg; or 16 positions, pushbutton, 2.0in. cable, connector RoHS : Compliant |
| 50 | |
| HS25 10K J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 25W 10000 Ohms 5% |
| 50 | ||
| HS25 4K7 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 25W 4700 Ohms 5% |
| 50 | ||
| HS25 R22 J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 25W 0.22 OHM 5% |
| 50 | ||
| HS25 1R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 25W 1.0 OHM1% |
| 50 | ||
| HS-29 | Triad Magnetics | Audio Transformers / Signal Transformers Audio Xfmr, Zpri = 5Kohm/20Kohm: Zsec = 20Kohm/80Kohm, 20-20KHz, 22dBu |
| 43 | ||
| 57HS22-02-2-07N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 10 | ||
| HS200 R82 F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 200W 0.82 OHMS 1% |
| 8 | ||
| DHS25-A28D08BC3QC | Innodisk Corporation | 2.5" SATA SSD 3IE3, 15nm(Industrial, Standard Grade, 0°C ~ +70°C) -- 128GB 2.5" SATA SSD 3IE3 iSLC |
| 5 | ||
| 57HS22-01-1-15S | Grayhill Inc | SWITCH ROTARY 15POS 250MA 115V RoHS : Compliant |
| 0 | ||
| 57HS22-05-1-03N | Grayhill Inc | Rotary Switches 57HS22-05-1-03N RoHS : Compliant |
| 0 | ||
| HS20F1B | Sola/Hevi-Duty | Industrial Control Transformers 1KVA 120X 240-16/32 BB |
| 0 | ||
| HS200 33R J | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 200W 33 Ohms 5% |
| 0 | ||
| HS25F-75-SS-2048-ABC-28V/V-SCS96-S | BEI Sensors | Incremental Optical Encoder, 2048PPR, 96" Cable, 01072-377 |
| 0 | ||
| DHS200A15 | Cosel USA Inc | DC DC CONVERTER 15V 201W RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C6335/HS2-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to UHF Female Low Loss Cable 12 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 12 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 12 inch length using LMR-195 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-12 can also be known as a low loss right angle type N plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-12 can also be used in the other direction and will be UHF female to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 12 inch length using LMR-195 coax with double heatshrink. |
| 254 | |
| PE3C3803/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female to Mini SMP Female Cable 24 Inch Length Using PE-P047 Coax with HeatShrink., Radio frequency assembly SMP female to mini SMP female cable 24 inch length using PE-P047 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to mini SMP female cable 24 inch length using PE-P047 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a mini SMP cable connection on the other. Our SMP to mini SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C3803/HS-24 can also be known as a SMP jack to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and FEP dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3803/HS-24 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMP female to Mini SMP female cable has a maximum VSWR of 1.39:1. SMP jack to mini SMP jack cable assembly PE3C3803/HS-24 is built with PE-P047 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to mini SMP cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3803/HS-24 can also be used in the other direction and will be a mini SMP female to SMP female cable assembly if the opposite connectivity is required. SMP jack to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to mini SMP cable assembly for quick shipment worldwide. Variations of SMP and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Mini SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5083/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female to MMCX Plug Cable 24 Inch Length Using PE-P047 Coax with HeatShrink., Radio frequency assembly mini SMP female to MMCX plug cable 24 inch length using PE-P047 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to MMCX plug cable 24 inch length using PE-P047 coax with heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and MMCX cable connection on the other. Our mini SMP to MMCX cable assemblies have a female gender on end 1 and plug on end 2. PE3C5083/HS-24 can also be known as a mini SMP jack to MMCX male cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to MMCX male cable assembly PE3C5083/HS-24 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency mini SMP female to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5083/HS-24 can also be used in the other direction and will be MMCX plug to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to MMCX cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to MMCX plug cable 24 inch length using PE-P047 coax with heatshrink. |
| 0 | ||
| PE3C5984/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable Using PE-P086HF Coax with HeatShrink In 24 Inch Length., Radio frequency assembly 2.4mm male to 2.4mm male cable using PE-P086HF coax with heatshrink in 24 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable using PE-P086HF coax with heatshrink in 24 inch length, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to 2.4mm cable is a male to male coax assembly, PE3C5984/HS-24, can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5984/HS-24 is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable using PE-P086HF coax with heatshrink in 24 inch length. |
| 0 | ||
| PE3C6789/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. BNC Male to TNC Male Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly BNC male to TNC male right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to TNC male right angle low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and right angle TNC cable connection on the other. Our low loss BNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to TNC cable is a male to male coax assembly, PE3C6789/HS-200CM, can also be known as a low loss BNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to TNC plug cable assembly PE3C6789/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency BNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6789/HS-200CM can also be used in the other direction and will be right angle TNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to TNC male right angle low loss cable 200 cm length using LMR-100 coax. |
| 0 | ||
| PE3C9520/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Water Blue FAKRA Jack Right Angle to SMA Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack right angle to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack right angle to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle FAKRA cable connection on one end and a SMA cable connection on the other. Our low loss right angle FAKRA to SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3C9520/HS-200CM can also be known as a low loss right angle FAKRA female to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9520/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle FAKRA jack to SMA male cable has a maximum VSWR of 1.4:1. FAKRA female to SMA plug cable assembly PE3C9520/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9520/HS-200CM can also be used in the other direction and will be a SMA male to right angle FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA right angle female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W00862/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly TNC male to N male low loss cable 24 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N male low loss cable 24 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and N type cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00862/HS-24 can also be known as a low loss TNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. TNC plug to N type plug cable assembly PE3W00862/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00862/HS-24 can also be used in the other direction and will be type N male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N male low loss cable 24 inch length using LMR-400 coax with heatshrink. |
| 0 | ||
| PE3W00934/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. MMCX Plug Right Angle to SMA Female Bulkhead Cable 200 cm Length Using RG188-DS Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to SMA female bulkhead cable 200 cm length using RG188-DS coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX plug right angle to SMA female bulkhead cable 200 cm length using RG188-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMA bulkhead cable connection on the other. Our right angle MMCX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMCX to SMA cable is a plug to female coax assembly, PE3W00934/HS-200CM, can also be known as a right angle MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA jack cable assembly PE3W00934/HS-200CM is built with RG188-DS which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00934/HS-200CM can also be used in the other direction and will be SMA female bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA female bulkhead cable 200 cm length using RG188-DS coax with heatshrink. |
| 0 | ||
| PE3W01768/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to MMCX Plug Right Angle Low Loss Cable 24 Inch Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly SMA male right angle to MMCX plug right angle low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MMCX plug right angle low loss cable 24 inch length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle SMA to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W01768/HS-24 can also be known as a low loss right angle SMA plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01768/HS-24 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MMCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MMCX male cable assembly PE3W01768/HS-24 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01768/HS-24 can also be used in the other direction and will be a right angle MMCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05508/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to TNC Female Bulkhead Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to TNC female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female bulkhead low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W05508/HS-200CM can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05508/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to TNC jack cable assembly PE3W05508/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05508/HS-200CM can also be used in the other direction and will be a TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12494/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable Using LMR-LW195 Coax with HeatShrink in 200CM., Radio frequency assembly SMA male to SMA male low loss cable using LMR-LW195 coax with heatshrink in 200CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable using LMR-LW195 coax with heatshrink in 200CM, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W12494/HS-200CM, can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W12494/HS-200CM is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable using LMR-LW195 coax with heatshrink in 200CM. |
| 0 | ||
| PE3W12911/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to N Male Low Loss Cable 24 Inch Length Using LMR-600-UF Coax with HeatShrink., Radio frequency assembly N female bulkhead to N male low loss cable 24 inch length using LMR-600-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N male low loss cable 24 inch length using LMR-600-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a female gender on end 1 and a male on end 2. PE3W12911/HS-24 can also be known as a low loss type N jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12911/HS-24 RF cable has a TPE jacket of 0.590-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our bulkhead type N female to type N male cable has a maximum VSWR of 1.4:1. Type N jack to type N plug cable assembly PE3W12911/HS-24 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12911/HS-24 can also be used in the other direction and will be a type N male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W15327/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to Water Blue FAKRA Jack Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to water blue FAKRA jack low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to water blue FAKRA jack low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a FAKRA cable connection on the other. Our low loss right angle SMA to FAKRA cable assembly has a male gender on end 1 and a jack on end 2. PE3W15327/HS-24 can also be known as a low loss right angle SMA plug to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15327/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to FAKRA jack cable has a maximum VSWR of 1.4:1. SMA plug to FAKRA female cable assembly PE3W15327/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15327/HS-24 can also be used in the other direction and will be a FAKRA jack to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to FAKRA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3171/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Cable 24 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male to SMA female cable 24 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable 24 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and female on end 2. PE3171/HS-24 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.591 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA jack cable assembly PE3171/HS-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3171/HS-24 RF cable are available on our downloadable PDF datasheet.PE3171/HS-24 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3425/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Cable 24 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male cable 24 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male cable 24 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3425/HS-24 can also be known as a TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE (LD) dielectric type. Our PE3425/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3425/HS-24 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | THS255R6J | TE Connectivity | THS25 5R6 5% Resistance Value: 5.6 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 5.6 Ω Wire Wound 5 % Power Resistor | Part Number: THS255R6J | Internal Number: 2-1879075-2 | TE Connectivity RoHS : Compliant |
| 365 | |
| THS2518RJ | TE Connectivity | THS25 18R 5% Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 18 Ω Wire Wound 5 % Power Resistor | Part Number: THS2518RJ | Internal Number: 2-1879075-7 | TE Connectivity RoHS : Compliant |
| 203 | ||
| THS255R0J | TE Connectivity | THS25 5R0 5% Resistance Value: 5 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 5 Ω Wire Wound 5 % Power Resistor | Part Number: THS255R0J | Internal Number: 2-1879075-0 | TE Connectivity RoHS : Compliant |
| 176 | ||
| THS254R7J | TE Connectivity | THS25 4R7 5% Resistance Value: 4.7 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 4.7 Ω Wire Wound 5 % Power Resistor | Part Number: THS254R7J | Internal Number: 1-1879075-9 | TE Connectivity RoHS : Compliant |
| 168 | ||
| THS254K7J | TE Connectivity | THS25 4K7 5% Resistance Value: 4.7K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistor: Aluminum Housed & 75 Watt | 4.7K Ω Wire Wound 5 % Power Resistor | Part Number: THS254K7J | Internal Number: 5-1879075-2 | TE Connectivity RoHS : Compliant |
| 162 | ||
| THS251R0J | TE Connectivity | THS25 1R0 5% Resistance Value: 1 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 1 Ω Wire Wound 5 % Power Resistor | Part Number: THS251R0J | Internal Number: 1-1879075-3 | TE Connectivity RoHS : Compliant |
| 152 | ||
| PB6B2HS2M1CAL00Y500 | TE Connectivity | PN OFF/ON HC BLK M1 TERM IP68 500MM LHS Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: Without Operating Function: Momentary Configuration (Pole-Throw): Single Pole - Single Throw Number of Actuators: Single General Purpose Push Button Switch Without Momentary Single Pole - Single Throw | Pushbutton Switch | Part Number: PB6B2HS2M1CAL00Y500 | Internal Number: 2329359-1 | TE Connectivity RoHS : Compliant |
| 136 | ||
| THS2582RJ | TE Connectivity | THS25 82R 5% Resistance Value: 82 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 82 Ω Wire Wound 5 % Power Resistor | Part Number: THS2582RJ | Internal Number: 3-1879075-7 | TE Connectivity RoHS : Compliant |
| 132 | ||
| THS25180RJ | TE Connectivity | THS25 180R 5% Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 180 Ω Wire Wound 5 % Power Resistor | Part Number: THS25180RJ | Internal Number: 4-1879075-1 | TE Connectivity RoHS : Compliant |
| 80 | ||
| THS2510KJ | TE Connectivity | THS25 10K 5% Resistance Value: 10K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistor: Aluminum Housed & 75 Watt | 10K Ω Wire Wound 5 % Power Resistor | Part Number: THS2510KJ | Internal Number: 5-1879075-5 | TE Connectivity RoHS : Compliant |
| 77 | ||
| THS252R2J | TE Connectivity | THS25 2R2 5% Resistance Value: 2.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 2.2 Ω Wire Wound 5 % Power Resistor | Part Number: THS252R2J | Internal Number: 1-1879075-6 | TE Connectivity RoHS : Compliant |
| 64 | ||
| THS258R2J | TE Connectivity | THS25 8R2 5% Resistance Value: 8.2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistor: Aluminum Housed & 75 Watt | 8.2 Ω Wire Wound 5 % Power Resistor | Part Number: THS258R2J | Internal Number: 2-1879075-3 | TE Connectivity RoHS : Compliant |
| 58 | ||
| THS25R22J | TE Connectivity | THS25 R22 5% Resistance Value: .22 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.22 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R22J | Internal Number: 1879075-6 | TE Connectivity RoHS : Compliant |
| 29 | ||
| THS25R10J | TE Connectivity | THS25 R10 5% Resistance Value: .1 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.1 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R10J | Internal Number: 1879075-4 | TE Connectivity RoHS : Compliant |
| 28 | ||
| THS25R47J | TE Connectivity | THS25 R47 5% Resistance Value: .47 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ 0.47 Ω Wire Wound 5 % Power Resistor | Power Resistor: Aluminum Housed & 75 Watt | Part Number: THS25R47J | Internal Number: 1879075-9 | TE Connectivity RoHS : Compliant |
| 18 | ||
 Vyrian | 62HS22-H9-020C | Grayhill Inc | Rotary Position Encoder, Single, 2 Channels RoHS : Compliant | 15,634 | ||
| RHS250E | Ohmite Manufacturing | Potentiometer, Wire Wound, 25W, 250ohm, 10% +/-Tol, 1 Turn(s) | 15,560 | |||
| THS251R0J | TE Connectivity | Fixed Resistor, Wire Wound, 25W, 1ohm, 550V, 5% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Compliant | 12,853 | |||
| LTC2864HS-2-TRPBF | Analog Devices Inc | 11,730 | ||||
| LTC2864HS-2-PBF | Analog Devices Inc | 11,387 | ||||
| PESD3V3HS2-SF | Nexperia | Trans Voltage Suppressor Diode, 3.3V V(RWM), Bidirectional, 1 Element, Silicon RoHS : Compliant | 10,880 | |||
| BKP2125HS221-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 2A, 2 Pin(s) RoHS : Compliant | 10,467 | |||
| THS258R2J | TE Connectivity | Fixed Resistor, Wire Wound, 25W, 8.2ohm, 550V, 5% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Compliant | 9,585 | |||
| PB6B2HS2M1CAL00Y500 | TE Connectivity | Pushbutton Switch, SPST, 0.12A, 50VDC, Wire Terminal, Panel Mount RoHS : Compliant | 8,852 | |||
| RHS25KE | Ohmite Manufacturing | Potentiometer, Wire Wound, 25W, 25000ohm, 10% +/-Tol, 1 Turn(s) | 8,633 | |||
| V0603MHS22NA | Littelfuse Inc | Varistor, Surface Mount RoHS : Compliant | 7,787 | |||
| KUSBHS2/256 | Kingston Technology Company | 5,763 | ||||
| FCR-HS2/CF | Kingston Technology Company | 5,470 | ||||
| LTC4364HS-2-TRPBF | Analog Devices Inc | 5,125 | ||||
| LFBK1005HS241-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.4A, 2 Pin(s) RoHS : Compliant | 771 | |||
 Waytek, Inc. | A171AHS24VDC.96R | CIT Relay & Switch | 280 Relay, 30A, SPST, 24VDC |
| 764 | |
 Win Source Electronics | LQG15HS27NJ02D | Murata Manufacturing Co Ltd | FIXED IND 27NH 350MA 460 MOHM RoHS : Compliant |
| 1,240,000 | |
| LQG15HS2N0B02D | Murata Manufacturing Co Ltd | FIXED IND 2NH 900MA 90 MOHM SMD / 2 nH Unshielded Multilayer Inductor 900 mA 90mOhm Max 0402 (1005 Metric) RoHS : Compliant |
| 990,000 | ||
| LQG15HS2N0S02D | Murata Manufacturing Co Ltd | FIXED IND 2NH 900MA 100 MOHM SMD RoHS : Compliant |
| 990,000 | ||
| LQG15HS2N4S02D | Murata Manufacturing Co Ltd | FIXED IND 2.4NH 850MA 150 MOHM RoHS : Compliant |
| 600,000 | ||
| LQG15HS2N7S02D | Murata Manufacturing Co Ltd | FIXED IND 2.7NH 800MA 150 MOHM RoHS : Compliant |
| 600,000 | ||
| LQG15HS22NJ02D | Murata Manufacturing Co Ltd | FIXED IND 22NH 350MA 420 MOHM RoHS : Compliant |
| 508,800 | ||
| LQG15HS2N2B02D | Murata Manufacturing Co Ltd | FIXED IND 2.2NH 900MA 90MOHM SMD RoHS : Compliant |
| 200,000 | ||
| LQG15HS2N7B02D | Murata Manufacturing Co Ltd | FIXED IND 2.7NH 800MA 120MOHM SM / 2.7 nH Unshielded Multilayer Inductor 800 mA 120mOhm Max 0402 (1005 Metric) RoHS : Compliant |
| 200,000 | ||
| NFG0QHB372HS2D | Murata Manufacturing Co Ltd | CMC 100MA 2LN 9 OHM SMD / 2 Line Common Mode Choke Surface Mount 9 Ohms @ 100 MHz 100mA DCR 2.375Ohm RoHS : Compliant |
| 150,000 | ||
| TMUXHS221NKGR | Texas Instruments | IC SWITCH DPDT X 1 8OHM 10UQFN RoHS : Compliant |
| 33,820 | ||
| TMUXHS221NKGT | Texas Instruments | IC SWITCH DPDT X 1 8OHM 10UQFN RoHS : Compliant |
| 32,550 | ||
| FBMJ2125HS250NT | TAIYO YUDEN | FERRITE BEAD 25 OHM 0805 1LN RoHS : Compliant |
| 32,000 | ||
| LQG15HS2N4C02D | Murata Manufacturing Co Ltd | FIXED IND 2.4NH 850MA 110MOHM SM RoHS : Compliant |
| 9,600 | ||
| ESE-11HS2 | Panasonic Electronic Components | SWITCH DETECTOR SPST-NO 10MA 5V / Switch SPST-NO Chassis Mount |
| 5,467 | ||
| FCHS20A08 | Kyocera AVX Components | DIODE SCHOT 80V 20A TO220 FM |
| 1,284 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼ 
English
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand