 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
MP2-5 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
 DigiKey | RCLAMP2504N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 15V SLP2626P10 RoHS : Compliant |
| 9,624 | |
| RCLAMP2504N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 15V SLP2626P10 RoHS : Compliant |
| 9,624 | ||
| EKMQ251VSN271MP25S | United Chemi-Con Inc | CAP ALUM 270UF 20% 250V SNAP TH |
| 3,181 | ||
| KMP25A-LS-E | Kun Hung Electric Co Ltd | Disconnect Switch 25A |
| 2,000 | ||
| SMP253EA4390MB31TR24 | KEMET Corporation | CAP METAL PAPER Y2 300V 3.9NF HZ RoHS : Unknown |
| 1,200 | ||
| SMP253EA4390MB31TR24 | KEMET Corporation | CAP METAL PAPER Y2 300V 3.9NF HZ RoHS : Unknown |
| 1,200 | ||
| SMP253EA4390MB31TR24 | KEMET Corporation | CAP METAL PAPER Y2 300V 3.9NF HZ RoHS : Unknown |
| 1,200 | ||
| EKMQ201VSN391MP25S | United Chemi-Con Inc | CAP ALUM 390UF 20% 200V SNAP TH |
| 1,000 | ||
| SMP253FA5100MB31TV24 | KEMET Corporation | CAP FILM Y2 10NF 310VAC SMD |
| 400 | ||
| MP-254064-10-8A | POWELL ELECTRONICS | LABEL ID PRODUCT |
| 250 | ||
| SMP253FB5220MC31TV44 | KEMET Corporation | CAP FILM Y2 22NF 310VAC SMD |
| 200 | ||
| ESMQ401VSN121MP25S | United Chemi-Con Inc | CAP ALUM 120UF 20% 400V SNAP TH |
| 100 | ||
| EKMR401VSN121MP25S | United Chemi-Con Inc | CAP ALUM 120UF 20% 400V SNAP TH |
| 70 | ||
| 468MP-2-5 | 3M | TAPE ADHSV TRNSFR CLR 2"X5YDS |
| 28 | ||
| IMP-250-22 | Orion Fans | IMPELLER 250MM X 22 |
| 3 | ||
 Avnet Americas | RCLAMP2504N.TCT | Semtech Corporation | ESD Protection Device, 15 V, SLP2626P10, 10 Pins, 2.5 V, 5 pF - Tape and Reel (Alt: RCLAMP2504N.TCT) RoHS : Compliant |
| 15,000 | |
| STM32MP257FAI3 | STMicroelectronics | STM32MP257FAI3 - Bulk (Alt: STM32MP257FAI3) RoHS : Not Compliant |
| 4,880 | ||
| RCLAMP2574N.TCT | Semtech Corporation | ESD Protection Device, 20 V, SLP3020N10, 10 Pins, 2.5 V, 5 pF - Tape and Reel (Alt: RCLAMP2574N.TCT) RoHS : Compliant |
| 3,000 | ||
| HLMP-2550 | Broadcom Limited | LED Bar Graph Array, Green, 20 mA, 2.2 V, 50 mcd, 4 LEDs, 19.05mm x 3.81mm - Rail/Tube (Alt: HLMP-2550) RoHS : Compliant |
| 895 | ||
| MP250 | CTS Corporation | Crystal 25MHz 2-Pin HC-49/U Bulk - Bulk (Alt: MP250) RoHS : Compliant |
| 200 | ||
| STM32MP255FAK3 | STMicroelectronics | Microcontrollers & Microprocesso - Trays (Alt: STM32MP255FAK3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255DAK3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, VFBGA - Trays (Alt: STM32MP255DAK3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255DAL3 | STMicroelectronics | STM32MP - Trays (Alt: STM32MP255DAL3) RoHS : Not Compliant |
| 150 | ||
| STM32MP255FAI3 | STMicroelectronics | Microprocessor, 4 Cores, 32-bit, 64-bit, ARM Cortex-A35, ARM Cortex-M33, ARM Cortex-M0+, 1.5 GHz, TFBGA - Bulk (Alt: STM32MP255FAI3) RoHS : Not Compliant |
| 150 | ||
| STM32MP251AAK3 | STMicroelectronics | STM32MP251AAK3 - Bulk (Alt: STM32MP251AAK3) RoHS : Not Compliant |
| 150 | ||
| STM32MP253CAI3 | STMicroelectronics | STM32MP - Bulk (Alt: STM32MP253CAI3) RoHS : Not Compliant |
| 135 | ||
| HLMP-2500 | Broadcom Limited | LED Single Color Light Bar Green 571nm 30mA 4-Pin SIP Tube - Rail/Tube (Alt: HLMP-2500) RoHS : Compliant |
| 60 | ||
| STM32MP257F-DK | STMicroelectronics | Discovery Board, STM32MP257FAK3, 32 / 64bit, ARM Cortex-A35/Cortex-M33F - Boxed Product (Development Kits) (Alt: STM32MP257F-DK) RoHS : Not Compliant |
| 52 | ||
| STM32MP257FAL3 | STMicroelectronics | STM32MP - Trays (Alt: STM32MP257FAL3) RoHS : Not Compliant |
| 20 | ||
| STM32MP257F-EV1 | STMicroelectronics | Evaluation Board, STM32MP257FAI3, STM32 Family, ARM Cortex-A35/M33/M0+, 32bit/64bit, Dual Core - Boxed Product (Development Kits) (Alt: STM32MP257F-EV1) RoHS : Not Compliant |
| 11 | ||
 Mouser Electronics | MP-254127-10-8A | TE Connectivity | Labels & Industrial Warning Signs MP 1/.5" LABEL PRICE PER LABEL RoHS : Compliant |
| 146,900 | |
| MP250-M | Panduit Corp | Wire Labels & Markers Marker Plate, 2.50" x 0.75"(63.5mm x 19.1mm), White RoHS : Compliant |
| 12,696 | ||
| MP2560DN-LF-Z | Monolithic Power Systems | Switching Voltage Regulators 2.5A, 4MHz, 42V Step-Down Converter RoHS : Compliant |
| 8,597 | ||
| MP2562DS-LF-Z | Monolithic Power Systems | Switching Voltage Regulators 1A/50V, 4MHz HF Step DownSwitch Regulato RoHS : Compliant |
| 3,985 | ||
| MP2565DN-LF-Z | Monolithic Power Systems | Switching Voltage Regulators 2.5A, 4MHz, 50V Step-Down Converter RoHS : Compliant |
| 1,489 | ||
| MP2562DQ-LF-P | Monolithic Power Systems | Switching Voltage Regulators 1A/50V, 4MHz HF Step DownSwitch Regulato RoHS : Compliant |
| 1,133 | ||
| MP-2501A | Same Sky | Phone Connectors mono plug 2.5mm Mono Cable mnt RoHS : Compliant |
| 780 | ||
| MP250A-E | CTS Corporation | Crystals 25MHz 20pF 30ppm -40/85 RoHS : Compliant |
| 689 | ||
| MP250-E | CTS Corporation | Crystals 25MHz Series 30ppm -40/85 RoHS : Compliant |
| 645 | ||
| MP2505M4AS | Proterial Cable America | Ferrite Toroids / Ferrite Rings 27.43mmOD x 18.05mmID MEGAMP Core COATED RoHS : Compliant |
| 100 | ||
| MP2510V4AF | Proterial Cable America | Ferrite Toroids / Ferrite Rings 25mmOD x 10mmID HI PM AMORPHS CORE RoHS : Compliant |
| 100 | ||
| MP250R0 | Vishay Precision Group Inc | Metal Foil Resistors - SMD MP250R0 0.05% BULK RoHS : Compliant |
| 99 | ||
| MP2510P4AF | Proterial Cable America | Ferrite Toroids / Ferrite Rings 25mmOD x 10mmID HI PM AMORPHS CORE RoHS : Compliant |
| 60 | ||
| MP2560DQ-LF-P | Monolithic Power Systems | Switching Voltage Regulators 2.5A, 4MHz, 42V Step-Down Converter RoHS : Compliant |
| 51 | ||
| MP2510MPFC | Proterial Cable America | Ferrite Toroids / Ferrite Rings 25mmOD x 10mmID GAP AMORPHS CORE RoHS : Compliant |
| 18 | ||
 Verical | MP-254127-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x12.7mm RoHS : Compliant |
| 60,000 | |
| MP-254254-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x25.4mm RoHS : Compliant |
| 30,000 | ||
| MP-254064-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x6.4mm RoHS : Compliant |
| 20,000 | ||
| MP-2501A | Same Sky | 2.5 mm, Mono, Round Cover, Audio Plug Connector RoHS : Exempt |
| 3,950 | ||
| MP-2522-01 | Same Sky | 2.5 mm, Mono, Overmold, Audio Plug Connector RoHS : Exempt |
| 2,000 | ||
| MP250-C0 | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 Black RoHS : Compliant |
| 1,300 | ||
| MP250-M | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 1,060 | ||
| MP250-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 800 | ||
| MP250 | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) Series 3rd Overtone 55Ohm 2-Pin HC-49/US Thru-Hole Bulk RoHS : Compliant |
| 680 | ||
| MP254 | Rectron Semiconductor | Diode Rectifier Bridge Single 400V 25A 4-Pin MP-25 RoHS : Exempt |
| 540 | ||
| MP258W | Rectron Semiconductor | Diode Rectifier Bridge Single 800V 25A 4-Pin Case MP-25W RoHS : Compliant |
| 250 | ||
| MP256 | Rectron Semiconductor | Diode Rectifier Bridge Single 600V 25A 4-Pin MP-25 RoHS : Compliant |
| 120 | ||
| MP250W175-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 100 | ||
| MP250-C0 | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 Black RoHS : Compliant |
| 98 | ||
| MP250-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 10 | ||
 Arrow Electronics | MP-254254-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x25.4mm RoHS : Compliant |
| 30,000 | |
| MP258W | Rectron Semiconductor | Diode Rectifier Bridge Single 800V 25A 4-Pin Case MP-25W RoHS : Compliant |
| 250 | ||
| MP250-C0 | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 Black RoHS : Compliant |
| 100 | ||
| MP250-C | Panduit Corp | Cable Markers Write On Tie Nylon 6/6 White RoHS : Compliant |
| 10 | ||
 Newark | DBMP25PC | ITT Interconnect Solutions | RoHS : Not Compliant |
| 518 | |
| DCMP25W3P | ITT Interconnect Solutions | RoHS : Not Compliant |
| 231 | ||
| DBMMP25PP | ITT Interconnect Solutions | RoHS : Not Compliant |
| 153 | ||
| DBMP25SJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 53 | ||
| IMP-250-22 | Orion Fans | METAL IMPELLER, 250MM X 22DEG, OF MOTOR; Pitch Angle:22°; For Use With:OAM Open Frame Motor; Blade Gauge:0.8 ± 0.03; Airflow Direction:Intake (toward motor); Impeller Connection:Screw; Impeller Material:Aluminium RoHS Compliant: Yes RoHS : Compliant |
| 44 | ||
| IMP-250-28 | Orion Fans | METAL IMPELLER, 250MM X 28DEG, OF MOTOR; Pitch Angle:28°; For Use With:OAM Open Frame Motor; Blade Gauge:0.8 ± 0.03; Airflow Direction:Intake (toward motor); Impeller Connection:Screw; Impeller Material:Aluminium RoHS Compliant: Yes RoHS : Compliant |
| 18 | ||
| DCMP25W3SP | ITT Interconnect Solutions | RoHS : Not Compliant |
| 16 | ||
| MP-25043-54L | Amphenol Audio | RoHS : Not Compliant |
| 8 | ||
| HDC HE 24 MP 25-48 | Weidmüller Interface GmbH & Co. KG | HEAVY DUTY INSERT, PLUG, 48+PE, 20-12AWG; RoHS : Compliant |
| 8 | ||
| BMS-K-2-C70-MP-25.4 | Labfacility Limited | MAGNET, T/C, K, 2M + PLUG, 3KG PULL; RoHS : Compliant |
| 7 | ||
| MP-25042-150L | Amphenol Audio | RoHS : Not Compliant |
| 4 | ||
| MP-25043-13S | Amphenol Audio | RoHS : Not Compliant |
| 4 | ||
| MP250W175-C | Panduit Corp | MARKER PLATE, NYLON6.6, WHT, 44.4X63.5MM; Label Type:Identification; Label Dimensions:44.4mm x 63.5mm; Label Material:Nylon 6.6; Label Colour:White; Pack Quantity:100; Product Range:- RoHS Compliant: Yes (Alternate Part Number: 07498365062 RoHS : Compliant |
| 3 | ||
| MP250-M | Panduit Corp | MARKER PLATE, WRITE ON PLATE, WHT; (Alternate Part Number: 07498365061 RoHS : Compliant |
| 2 | ||
| CHDASMP25 | CamdenBoss Ltd | MOUNTING PLATE, STEEL, ENCLOSURE; RoHS : Compliant |
| 2 | ||
 RS | MP250-M | Panduit Corp | HARNESS IDENTIFICATION MARKER PLATE, 2.50" X 0.75"(63.5MM X 19.1MM), WHITE |
| 900 | |
| MP25-2 | Custom Connector Corporation | ACCESSORY, RELAY SOCKET, HOLD DOWN SPRING, PLASTIC, FOR 25MM HIGH RELAYS |
| 100 | ||
| MP250W175-C | Panduit Corp | PRINTER TAPE, CARTRIDGE / CASSETTE, WHITE, NYLON 6.6, LENGTH 63.5MM RoHS : Compliant |
| 96 | ||
| MP250-C | Panduit Corp | MARKER PLATE, 2.50" X 0.75"(63.5MM X 19. |
| 95 | ||
| 62MP2500 | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN HOLE, .250 MAX PANEL |
| 78 | ||
| ER3WK2 (COMP-253) | Dantona Industries Inc | BATTERY, LITHIUM, 3.6V 1200 MAH, W/CONNECTOR, REPLACES FEDCO: LS14250-MR |
| 29 | ||
| IMP-250-22 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 22 DEGREE PITCH ANGLE |
| 20 | ||
| IMP-250-28 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 28 DEGREE PITCH ANGLE |
| 20 | ||
| IMP-250-34 | Orion Fans | METAL IMPELLER, FOR OAM OPEN FRAME MOTOR, 250MM X 34 DEGREE PITCH ANGLE |
| 20 | ||
| CMP250PS24 | XP Power | POWER SUPPLY AC-DC 24V@10.4A 5V@1.5A 12V@0.6A 80-264V IN OPEN FRAME MEDICAL 250W RoHS : Compliant |
| 8 | ||
| CMP250PS48 | XP Power | POWER SUPPLY AC-DC 48V@5.2A 5V@1.5A 12V@0.6A 80-264V IN OPEN FRAME MEDICAL 250W RoHS : Compliant |
| 3 | ||
| 0829435 (US-EMP (25X6)) | Phoenix Contact | LABELING;BLANK;0.98"X0.24" WHT;PLASTIC;WHITE;0.98" LX0.24" W;25.0MMX6.0MM;B |
| 3 | ||
| MP25TA00 | Red Lion Controls | SENSOR, PERMANENT, NPN, 2-LEAD WIRE, VINYL, -40 TO +107 DEG.C |
| 2 | ||
| 50LMP-25WH | Edwards Signaling | LAMP, HALOGEN,25W,105 SERIES REPLACEMENT, BEACON, TRADE NUMBER 25T8DC |
| 1 | ||
| LW6MP-25MA | IDEC Corporation | PANEL MOUNT INDICATOR 25MM PILOT LIGHT AMBER |
| 1 | ||
 STMicroelectronics | STM32MP257FAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 1,711 | |
| STM32MP255FAK3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 689 | ||
| STM32MP257CAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 96 | ||
| STM32MP257FAL3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 72 | ||
| STM32MP253CAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 51 | ||
| STM32MP257DAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN RoHS : Compliant |
| 36 | ||
| STM32MP257F-DK | STMicroelectronics | Discovery kit with STM32MP257F MPU |
| 29 | ||
| STM32MP251CAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 1xEthernet, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP255DAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN RoHS : Compliant |
| 0 | ||
| STM32MP251FAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 1xEthernet, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP251DAI3 | STMicroelectronics | MPU with Arm Cortex-A35 @1.5GHz, Cortex-M33 @400MHz, 1xEthernet RoHS : Compliant |
| 0 | ||
| STM32MP257AAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 3xEthernet (2+1 switch), 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN RoHS : Compliant |
| 0 | ||
| STM32MP255AAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN RoHS : Compliant |
| 0 | ||
| STM32MP255CAL3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
| STM32MP255CAI3 | STMicroelectronics | MPU with Dual Arm Cortex-A35 @1.2GHz, Cortex-M33 @400MHz, 2xEthernet, 3xFD-CAN, LVDS/DSI, H.264, 3D GPU, AI/NN, Secure Boot, Cryptography, DRAM enc/dec, PKA RoHS : Compliant |
| 0 | ||
 Bisco Industries | 62MP2500 | Micro Plastics Inc | 180 | |||
| 31-PMP-2.5-6 | MACHINE SCREWS | 167 | ||||
| MP250-C | Panduit Corp | 13 | ||||
 Onlinecomponents.com | MP-254127-10-8A | TE Connectivity | Labels Thermal Transfer Printable Label Polyester Matte Silver 25.4x12.7mm RoHS : Compliant |
| 67,348 | |
| MP-2501A | Same Sky | 2.5 mm, Mono, Round Cover, Audio Plug Connector RoHS : Compliant |
| 3,956 | ||
| MP25-2 | Custom Connector Corporation | Relay Accessories Plastic Spring for Electromechanical Relay RoHS : Compliant |
| 390 | ||
| MP256 | Rectron Semiconductor | Diode Rectifier Bridge Single 600V 25A 4-Pin MP-25 RoHS : Compliant |
| 128 | ||
| MP256W | Rectron Semiconductor | Diode Rectifier Bridge Single 600V 25A 4-Pin Case MP-25W RoHS : Compliant |
| 0 | ||
| MP25036 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| MP-25042-85L | Amphenol Audio | Suit MP-4106-85S RoHS : Compliant |
| 0 | ||
| MP258 | Rectron Semiconductor | RoHS : Compliant |
| 0 | ||
| MP-25043-150S | Amphenol Audio | Suit MP-4102-150P RoHS : Compliant |
| 0 | ||
| MP252W | Rectron Semiconductor | RoHS : Compliant |
| 0 | ||
| MP25048 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| MP250B | CTS Corporation | RoHS : Compliant |
| 0 | ||
| MP-25042-13L | Amphenol Audio | Suit MP-4106-13S RoHS : Compliant |
| 0 | ||
| MP2.5CLP(40) | Hirose Electric Co Ltd | RF Connectors / Coaxial Connectors RoHS : Compliant |
| 0 | ||
| MP250-E | CTS Corporation | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | LM2937IMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, BIPolar, PDSO4 RoHS : Not Compliant |
| 199 | |
LP3852EMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.435V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 12,839 | ||
| LP3855EMP2.5/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 96 | ||
LP3961EMP-2.5/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 800mA SOT223 T/R RoHS : Compliant |
| 269 | ||
LP3965EMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.55V Dropout, BICMOS, PDSO5 RoHS : Not Compliant |
| 5,274 | ||
LP38692MP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 16,000 | ||
LP3875EMP-2.5/NOPB | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 528 | ||
| LP3852EMP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 0.435V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 1,500 | ||
| LP38692MP-2.5 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, CMOS, PDSO5 RoHS : Not Compliant |
| 5,729 | ||
| LP3874EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 554 | ||
| LP3961EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 800mA SOT223 T/R RoHS : Compliant |
| 95 | ||
| LP3962EMP-2.5/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 2.5V 1.5A SOT223 T/R RoHS : Compliant |
| 1,230 | ||
RCLAMP2502L.TBT | Semtech Corporation | TVS Diode Steering (Rail to Rail) Uni-Directional 2.5V (Max) 20V 8-SOIC T/R RoHS : Compliant |
| 65 | ||
| RCLAMP2574N.TCT | Semtech Corporation | TVS Diode Steering (Rail to Rail) Uni-Directional 2.5V (Max) 20V 10-SON T/R RoHS : Compliant |
| 26,109 | ||
TCLAMP2512N.TCT | Semtech Corporation | TVS Diode Steering (Rail to Rail) Uni-Directional 2.5V (Max) 18V 10-SON T/R RoHS : Compliant |
| 8,150 | ||
 TME | OSRMP25B62A | OptoSupply Limited | LED; red/white; 5mm; 1120÷1560mcd; 60°; Front: convex; No.of term: 2 |
| 1,754 | |
LM1117MP-2.5/NOPB | Texas Instruments | IC: voltage regulator; LDO,fixed; 2.5V; 0.8A; SOT223; SMD; 0÷125°C RoHS : Compliant |
| 822 | ||
| STM32MP257DAK3 | STMicroelectronics | IC: ARM microprocessor; Architecture: ARM,Cortex A35,Cortex M33 RoHS : Compliant |
| 50 | ||
| STM32MP251AAK3 | STMicroelectronics | IC: ARM microprocessor; Architecture: STM32 RoHS : Compliant |
| 50 | ||
| STM32MP257F-DK | STMicroelectronics | STM32MP257F-DK |
| 47 | ||
| MP-25043-13S | Amphenol Corporation | Protection cover; PIN: 13; internal bayonet,bayonet; sockets RoHS : Compliant |
| 1 | ||
| RCLAMP2504P.TCT | Semtech Corporation | Diode: TVS array; 2.7V; 5A; 80W; unidirectional; ESD; SLP1616P6 RoHS : Compliant |
| 0 | ||
| SMP253MA4330MTV24 | KEMET Corporation | Capacitor: paper; Y2; 3.3nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| NSYSPMP2580 | Schneider Electric | Mounting plate; galvanised steel; W: 247mm; L: 705mm |
| 0 | ||
| SMP253MA4390MTR24 | KEMET Corporation | Capacitor: paper; Y2; 3.9nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| MP-25043-54S | Amphenol Corporation | Protection cover; PIN: 54; internal bayonet,bayonet; sockets RoHS : Compliant |
| 0 | ||
MP-2501A | Same Sky | Connector: Jack 2,5mm; plug; male; mono; straight; for cable; black RoHS : Compliant |
| 0 | ||
| SMP253MA4390MTV24 | KEMET Corporation | Capacitor: paper; Y2; 3.9nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| SMP253MA4150MTV24 | KEMET Corporation | Capacitor: paper; Y2; 1.5nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
| SMP253MA4470MTV24 | KEMET Corporation | Capacitor: paper; Y2; 4.7nF; ±20%; SMD; SMP253; 250VAC; 2000V/μs RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | LM2937IMP-2.5/NOPB | Texas Instruments | SOT-223//400MA LDO REGULATOR RoHS : Compliant | 10,000 | ||
| WSMP2512FR025FT0 | FSHY | 4,000 | ||||
 ComSIT USA | LM1117MP25NOPB | Texas Instruments | AVAILABLE EU | 1,978 | ||
ComSIT USA | LM1117MP25NOPB | National Semiconductor Corporation | 800 MILLIAMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 2,448 | ||
| HLMP2500FG000CATFBIN4 | Avago Technologies | LED LT BAR 8.89X3.81MM SGL GREEN RoHS : Compliant | 1,390 | |||
| LP3961EMP25NOPB | National Semiconductor Corporation | 800 MILLI AMP FAST ULTRA LOW DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Compliant | 1,275 | |||
| LP3964EMP25NOPB | National Semiconductor Corporation | 800 MILLI AMP FAST ULTRA LOW DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 0.35V Dropout, CMOS, PDSO5 RoHS : Compliant | 1,155 | |||
| LM2937IMP25NOPB | National Semiconductor Corporation | 400 MILLIAMP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, BIPolar, PDSO4 RoHS : Compliant | 1,000 | |||
| HLMP2500CATG | Avago Technologies | Visible LED RoHS : Compliant | 980 | |||
| HLMP2500CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 8.89mm RoHS : Compliant | 360 | |||
| HLMP2500CATGBIN3 | Agilent Technologies Inc | Electronic Component RoHS : Not Compliant | 330 | |||
| HLMP2550CATG | Avago Technologies | Visible LED RoHS : Compliant | 320 | |||
| HLMP2598 | Hewlett Packard Co | PANEL AND LEGEND MOUNT FOR LED LIGHT BARS LED Mounting Hardware RoHS : Not Compliant | 300 | |||
| HLMP2550CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 90 | |||
| HLMP2500FG000CATGBIN4 | Avago Technologies | LED LT BAR 8.89X3.81MM SGL GREEN RoHS : Compliant | 80 | |||
| HLMP2550G3 | Hewlett Packard Co | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 60 | |||
| HLMP2500G | Avago Technologies | Visible LED RoHS : Not Compliant | 21 | |||
| HLMP2550F3 | Hewlett Packard Co | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 16 | |||
 GLYN GmbH & Co. KG | TXMP-2550 | Ka-Ro electronics GmbH | Computer On Module - STM32MP255 Dual Core A35, 1. | 8 | ||
| TXMP-2570 | Ka-Ro electronics GmbH | Computer On Module - STM32MP257 Dual Core A35, 1. | 1 | |||
 Interstate Connecting Components | MP250-M | Panduit Corp | Marker Plate, 2.50 x x 19. 0.75(63.5mm |
| 934 | |
| DCMP-25C3S-J-K126 | ITT Interconnect Solutions | DCMP25C3SJK126 | 0 | |||
| DCMP-25H3P-J-K127 | ITT Interconnect Solutions | DCMP25H3PJK127 | 0 | |||
| MP-254064-10-8A | TE Connectivity | A83632-000 RoHS : Compliant |
| 0 | ||
| MP-25042-25S | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 25 | 0 | |||
| DBMP-25P-J-K127 | ITT Interconnect Solutions | DBMP-25P-J-K127 RoHS : Compliant | 0 | |||
| DCMP-25H3S-J-K126 | ITT Interconnect Solutions | DCMP25H3SJK126 | 0 | |||
| MP-25042-54S | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 54 | 0 | |||
| DBMMP-25S-F | ITT Interconnect Solutions | DBMMP-25S-F RoHS : Not Compliant | 0 | |||
| MP-25042-13S | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 13 | 0 | |||
| MP-25043-19L | Amphenol Sine Systems | DUST CAP FOR M-4101 SERIES 19 | 0 | |||
| CBL-CLMP-25-23 | Amphenol Industrial Operations | 200A 3WAYS CABLE CLAMP, 25MM | 0 | |||
| MP-25042-150L | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 150 | 0 | |||
| MP-25042-19L | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 19 | 0 | |||
| MP-25042-37L | Amphenol Sine Systems | DUST CAP FOR M-4106 SERIES 37 | 0 | |||
 NexGen Digital | LP3965EMP-2.5 | National Semiconductor Corporation | RoHS : Not Compliant | 517 | ||
 PEI Genesis | DCMP25M3PVA101 | ITT Interconnect Solutions |
| 0 | ||
| DCMP25W3PJK87 | ITT Interconnect Solutions |
| 0 | |||
| DCMP25X3SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMP25PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DCMP25C3SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DCMP25W3SP | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PJA101 | ITT Interconnect Solutions |
| 0 | |||
| DCMMP25H3PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DBMP25SR | ITT Interconnect Solutions |
| 0 | |||
| DCMP25W3P | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PP | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PJK87 | ITT Interconnect Solutions |
| 0 | |||
| DBMP25PC | ITT Interconnect Solutions |
| 0 | |||
| DBMP25SJ | ITT Interconnect Solutions |
| 0 | |||
| DBMMP25PJ | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | MP-25043-54L | Amphenol Corporation | Connector RoHS : Compliant |
| 5 | |
| MP-25042-150L | Amphenol Corporation | Connector RoHS : Compliant |
| 3 | ||
| MP-25043-13S | Amphenol Corporation | Connector RoHS : Compliant |
| 3 | ||
| MP-25042-19S | Amphenol Corporation | Connector RoHS : Compliant |
| 2 | ||
| MP-25043-19S | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
| MP-25043-150L | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
| 1489MP25 | Hammond Manufacturing | 25PB 22MM 15X14X6 |
| 1 | ||
| MP-25043-25S | Amphenol Corporation | Connector RoHS : Compliant |
| 1 | ||
 PUI | EKMM401VNN680MP25U | United Chemi-Con Inc | RoHS : Compliant | 200 | ||
 Richardson RFPD | ECLAMP2515K.TCT | Semtech Corporation | ESD Protection Device for T-Flash/MicroSD Interfac RoHS : Compliant |
| 0 | |
| UCLAMP2501ZATFT | Semtech Corporation | 1-Line 2.5V 4.5pF 0.11 Ohms SLP0603P2X3F RoHS : Not Compliant |
| 0 | ||
| EKMR401VSN121MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 120uF 400V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| UCLAMP2511T.TNT | Semtech Corporation | ESD Suppressor Diode TVS Bi-Dir 2.5V 7.5Vc 2-Pin S RoHS : Compliant |
| 0 | ||
| AMP2511-11 | Astrodyne TDI Power Supplies & EMI Filters | INDUSTRIPOWER SUPPLY RoHS : Compliant | 0 | |||
| ELXS161VSN471MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 470uF 160V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
UCLAMP2501T.TCT | Semtech Corporation | ESD Suppressor TVS Uni-Dir 2.5V 2-Pin SLP T/R RoHS : Compliant |
| 0 | ||
| MP250B-E | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) 18pF RoHS : Compliant |
| 0 | ||
| ECLAMP2522P.TCT | Semtech Corporation | ESD Suppressor Diode TVS Uni-Dir 5.5V 6-Pin SLP EP RoHS : Compliant |
| 0 | ||
| EKMS421VSN101MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 100uF 420V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
| MP250A-E | CTS Corporation | Crystal 25MHz ±30ppm (Tol) ±50ppm (Stability) 20pF RoHS : Compliant |
| 0 | ||
| AMP2511-05 | Astrodyne TDI Power Supplies & EMI Filters | INDUSTRIPOWER SUPPLY RoHS : Compliant | 0 | |||
| ELXS421VSN101MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 100uF 420V 20%( 22 X 25mm) Snap RoHS : Compliant | 0 | |||
| ECLAMP2504K.TCT | Semtech Corporation | ESD/EMI Protection for Color LCD Interfaces RoHS : Compliant |
| 0 | ||
| EKMS3B1VSN181MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 180uF 315V 20% (22 X 25mm) Snap RoHS : Compliant | 0 | |||
 Chip 1 Exchange | LP3962EMP-2,5 | INSTOCK | 39,635 | |||
| EKMS201VSN391MP25S | Chemi-Con | INSTOCK RoHS : Compliant | 3,300 | |||
| LP3872EMP-2.5 | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 2,956 | |||
| HLMP 2500 | INSTOCK | 1,742 | ||||
| MP25VS27MC5R7 | INSTOCK | 1,000 | ||||
| LM1117MP-2.5 | INSTOCK | 777 | ||||
| HLMP-2550 | INSTOCK | 748 | ||||
| HLMP-2500 | Broadcom Limited | INSTOCK RoHS : Compliant | 492 | |||
| EKMS201VSN391MP25S | Chemi-Con | INSTOCK RoHS : Compliant | 120 | |||
| MP2506W | ELITE | INSTOCK | 80 | |||
| EKMH160VSN682MP25T | United Chemi-Con Inc | INSTOCK | 1 | |||
 Avnet Abacus | SMP253EA4330MB31TR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4330MB31TR24) RoHS : Compliant | 1,200 | ||
| MP250B-E | CTS Corporation | (Alt: MP250B-E) RoHS : Compliant | 0 | |||
| DBMP-25P-J-K127 | ITT Interconnect Solutions | (Alt: 053513-2449) RoHS : Compliant | 0 | |||
| DCMP-25W3P-J-K87 | ITT Interconnect Solutions | (Alt: 053514-4857) RoHS : Compliant | 0 | |||
| CMP2512AFX-1500ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-1500ELF) RoHS : Compliant | 0 | |||
| SMP253MA4150MTV24 | KEMET Corporation | Safety Capacitor Metallized Paper 5045 127114 Metric 1500 pF 20 Y2 Surface Mount 250 VAC (Alt: SMP253MA4150MTV24) RoHS : Compliant | 0 | |||
| CMP2512-FX-5110ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-5110ELF) RoHS : Compliant | 0 | |||
| CMP2512AFX-3301ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512AFX-3301ELF) RoHS : Compliant | 0 | |||
| SMP253MA4470MTV24 | KEMET Corporation | Safety Capacitor Metallized Paper 5045 127114 Metric 4700 pF 20 Y2 Surface Mount 250 VAC (Alt: SMP253MA4470MTV24) RoHS : Compliant | 0 | |||
| SMP253MA4220MTV24 | KEMET Corporation | Safety Capacitor 2200 pF 250 VAC 20 Y2 Metallized Paper 5045 127114 Metric Surface Mount (Alt: SMP253MA4220MTV24) RoHS : Compliant | 0 | |||
| CMP2512-FX-1001ELF | Bourns Inc | - Tape and Reel (Alt: CMP2512-FX-1001ELF) RoHS : Compliant | 0 | |||
| SMP253MA4100MTV24 | KEMET Corporation | Safety Capacitor Metallized Paper 5045 127114 Metric 1000 pF 20 Y2 Surface Mount 250 VAC (Alt: SMP253MA4100MTV24) RoHS : Compliant | 0 | |||
| SMP255FA5220MB31TR24 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 22 nF 20 125C (Alt: SMP255FA5220MB31TR24) RoHS : Compliant | 0 | |||
| SMP255FB5680MC31TR24 | KEMET Corporation | SMP255 Film Metallized Paper Auto Safety Class X2 310 VAC X2 630 VDC 68 nF 20 125C (Alt: SMP255FB5680MC31TR24) RoHS : Compliant | 0 | |||
| SMP253EA4390MB31TR24 | KEMET Corporation | - Tape and Reel (Alt: SMP253EA4390MB31TR24) RoHS : Compliant | 0 | |||
Avnet Asia | RCLAMP2504N.TCT | Semtech Corporation | ESD Protection Device, 15 V, SLP2626P10, 10 Pins, 2.5 V, 5 pF (Alt: RCLAMP2504N.TCT) RoHS : Compliant |
| 0 | |
| RCLAMP2574NQTCT | Semtech Corporation | (Alt: RCLAMP2574NQTCT) RoHS : Compliant | 0 | |||
| UCLAMP2511T.TCT | Semtech Corporation | Diode TVS Single Bi-Dir 2.5V 40W 2-Pin SLP1006P2 T/R (Alt: UCLAMP2511T.TCT) RoHS : Compliant | 0 | |||
 Avnet Silica | AP2132BMP-2.5TRG1 | Diodes Incorporated | LDO Voltage Regulator Fixed 14 to 55 V in 300 mV Drop 25 V2 A out PSOP88 (Alt: AP2132BMP-2.5TRG1) RoHS : Compliant | 4,000 | ||
| UCLAMP2501T.TCT | Semtech Corporation | Diode TVS Single UniDir 25V 40W 2Pin SLP TR (Alt: UCLAMP2501T.TCT) RoHS : Compliant | 3,000 | |||
| ECLAMP2522P.TCT | Semtech Corporation | Diode TVS Quad BiDir 55V 6Pin SLP EP TR (Alt: ECLAMP2522P.TCT) RoHS : Compliant | 3,000 | |||
| STM32MP257FAK3 | STMicroelectronics | Microcontrollers microprocesso (Alt: STM32MP257FAK3) RoHS : Compliant | 357 | |||
| STM32MP257FAI3 | STMicroelectronics | STM32MP257FAI3 (Alt: STM32MP257FAI3) RoHS : Compliant | 300 | |||
| STM32MP255CAK3 | STMicroelectronics | Microcontrollers Microprocesso (Alt: STM32MP255CAK3) RoHS : Compliant | 238 | |||
| STM32MP257DAL3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAL3) RoHS : Compliant | 168 | |||
| STM32MP257DAK3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAK3) RoHS : Compliant | 119 | |||
| STM32MP257F-DK | STMicroelectronics | Discovery Board STM32MP257FAK3 32 64bit ARM CortexA35CortexM33F (Alt: STM32MP257F-DK) RoHS : Compliant | 9 | |||
| MP2560DQ-LF-P | Monolithic Power Systems | 25A 4MHZ 42V STEPDOWN CONVERTER (Alt: MP2560DQ-LF-P) RoHS : Compliant | 0 | |||
| STM32MP253AAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP253AAK3) RoHS : Compliant | 0 | |||
| ECLAMP2515K.TCT | Semtech Corporation | EClamp ESD Protection Device for TFlashMicroSD Interfaces 5V 16Pin SLP3313P16 TR (Alt: ECLAMP2515K.TCT) RoHS : Compliant | 0 | |||
| DMP25H18DLFDE-7 | Diodes Incorporated | (Alt: DMP25H18DLFDE-7) RoHS : Compliant | 0 | |||
| UCLAMP2501ZATFT | Semtech Corporation | ESD Suppressor Low Voltage TVS Diode 25kV 2Pin DFN (Alt: UCLAMP2501ZATFT) RoHS : Compliant | 0 | |||
| RCLAMP2504N.TCT | Semtech Corporation | ESD Protection Device 15 V SLP2626P10 10 Pins 25 V 5 pF (Alt: RCLAMP2504N.TCT) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | RCLAMP2574N.TCT | Semtech Corporation | RClamp 2-Line-Pairs 2.5V SLP3020N10 RoHS : Compliant |
| 1 | |
| RCLAMP2504P.TCT | Semtech Corporation | RCLAMP 4-Line 2.5V 0.8pF ESD SLP1616P6 RoHS : Compliant |
| 1 | ||
| ECLAMP2515K.TCT | Semtech Corporation | 5V 12pF 12kV SLP3313P16 TFlash/ MicroSD RoHS : Compliant |
| 0 | ||
| UCLAMP2501ZATFT | Semtech Corporation |
| 0 | |||
| RCLAMP2504N.TCT | Semtech Corporation | RAILCLAMP 4-LINE 2.5V 5pF ESD SLP2626P10 RoHS : Compliant |
| 0 | ||
| UCLAMP2511T.TNT | Semtech Corporation | 1-LINE 2.5V 10PF ESD SLP1006P2T |
| 0 | ||
| UCLAMP2501T.TCT | Semtech Corporation | UCLAMP2501T 2.5V SLP RoHS : Compliant |
| 0 | ||
| ECLAMP2522P.TCT | Semtech Corporation | 5.5V 45pF 24R USB Bi Filter SLP1616P6 RoHS : Compliant |
| 0 | ||
| ECLAMP2504K.TCT | Semtech Corporation | 3-POLE LC EMI FILTER SLP1713P8 RoHS : Compliant |
| 0 | ||
| CC-WMP255-KIT | Digi International Inc | ConnectCore MP255 Development Kit incl. dev board with ConnectCore MP255 Dual, 8GB eMMC, 1GB DDR4, Wireless SOM RoHS : Compliant |
| 0 | ||
| RCLAMP2511ZATFT | Semtech Corporation |
| 0 | |||
| RCLAMP2502L.TBT | Semtech Corporation | RCLAMP 2-Line 2.5V 5pF SO-8 RoHS : Compliant |
| 0 | ||
| TCLAMP2512N.TCT | Semtech Corporation | 2-Line, 2.5V, 12pF, 100A, SLP2626P10 RoHS : Compliant |
| 0 | ||
| UCLAMP2522T.TCT | Semtech Corporation |
| 0 | |||
| UCLAMP2512T.TCT | Semtech Corporation | 2-Line/Pairs 2.5V 1.3pF SLP2010N8T RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | LM2937IMP-2.5/NOPB | National Semiconductor Corporation | RoHS : Compliant | 5 | ||
 Component Electronics, Inc | LP38693MP-2.5/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | |
| LM2937IMP-2.5 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 847 | ||
| HLMP-2500-S22 | Agilent Technologies Inc | IN STOCK SHIP TODAY |
| 269 | ||
| LP3961EMP-2.5 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| HLMP-2500 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 120 | ||
| ESMH500VSN222MP25T | Chemi-Con | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| EKMQ351VSN121MP25S | United Chemi-Con Inc | IN STOCK SHIP TODAY | 62 | |||
| 684JMP250 | IN STOCK SHIP TODAY |
| 46 | |||
| HLMP-2500 | Hewlett Packard Co | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
| MP250 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| LP3964EMP-2.5/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
| HLMP-2550 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
LP3965EMP-2.5/NOPB | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
 DB Roberts | 62MP2500W | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN H | 0 | ||
| 62MP2500 | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN H | 0 | |||
| 62MP2500N | Essentra Components | HOLE PLUG, SNAP IN, 2.500 IN H | 0 | |||
| 22MP25031 | Essentra Components | SNAP BUSHING, 2.500 HOLE, 1.96 | 0 | |||
| 22MP25031W | Essentra Components | SNAP BUSHING, 2.500 HOLE, 1.96 | 0 | |||
 EBV Elektronik | HLMP-2500-GH000 | Broadcom Limited | LED Single Light Bar Green 571nm 30mA 4Pin SIP Tube (Alt: HLMP-2500-GH000) RoHS : Compliant | 320 | ||
| STM32MP255FAK3 | STMicroelectronics | Microcontrollers Microprocesso (Alt: STM32MP255FAK3) RoHS : Compliant | 0 | |||
| STM32MP255DAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz VFBGA (Alt: STM32MP255DAK3) RoHS : Compliant | 0 | |||
| STM32MP255FAI3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 15 GHz TFBGA (Alt: STM32MP255FAI3) RoHS : Compliant | 0 | |||
| STM32MP255AAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP255AAK3) RoHS : Compliant | 0 | |||
| STM32MP255CAJ3 | STMicroelectronics | STM32MP (Alt: STM32MP255CAJ3) RoHS : Compliant | 0 | |||
| STM32MP257CAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP257CAK3) RoHS : Compliant | 0 | |||
| STM32MP257DAK3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAK3) RoHS : Compliant | 0 | |||
| STM32MP257AAL3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP257AAL3) RoHS : Compliant | 0 | |||
| STM32MP253FAL3 | STMicroelectronics | LFBGA448AMicroprocessor Cortex STM32 Family STM32MP1 Series 32bit 650MHz 118V to 125V (Alt: STM32MP253FAL3) RoHS : Compliant | 0 | |||
| STM32MP257DAI3 | STMicroelectronics | STM32MP (Alt: STM32MP257DAI3) RoHS : Compliant | 0 | |||
| STM32MP251AAK3 | STMicroelectronics | STM32MP251AAK3 (Alt: STM32MP251AAK3) RoHS : Compliant | 0 | |||
| STM32MP253FAI3 | STMicroelectronics | STM32MP253FAI3 (Alt: STM32MP253FAI3) RoHS : Compliant | 0 | |||
| STM32MP257AAK3 | STMicroelectronics | Microprocessor 4 Cores 32bit 64bit ARM CortexA35 ARM CortexM33 ARM CortexM0 12 GHz VFBGA (Alt: STM32MP257AAK3) RoHS : Compliant | 0 | |||
| STM32MP253CAJ3 | STMicroelectronics | STM32MP (Alt: STM32MP253CAJ3) RoHS : Compliant | 0 | |||
 FDH Electronics | HAR MP25DVS | FDH Electronics | Wire Placehldr | 2 | ||
 Maritex | TACTDF52H16MP250-JL | Jialong | Tact Switch; SMD; dimensions 5.2x5.2; h=1.5mm; dust-proof; operating force 250gf; button: round |
| 118,972 | |
 Master Electronics | EKMQ201VSN391MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 390uF 200V 20% (22 X 25mm) Snap-In 10mm 1310mA 2000h 105A°C RoHS : Compliant |
| 2,400 | |
| ESMH160VSN103MP25U | United Chemi-Con Inc | Cap Alum 10000UF 20% 16V Snap RoHS : Compliant |
| 260 | ||
| ESMM160VSN103MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| ESMM251VSN221MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 220uF 250V 20% (22 X 25mm) Snap-In 10mm 1240mA 3000h 85A°C RoHS : Compliant |
| 0 | ||
| EKMM161VSN331MP25S | United Chemi-Con Inc | Cap Aluminum Lytic 330uF 160V 20% (22 X 25mm) Snap-In 10mm 1200mA 3000h 105A°C RoHS : Compliant |
| 0 | ||
| EKMR3B1VSN181MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| DCMP-25C3S-J-K126 | ITT Interconnect Solutions | DCMP-25C3S-J-K126; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| ESMM500VSN272MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| ESMQ251VSN271MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| CMP2512AFX-3301ELF | Bourns Inc | ResHighPowerA 2512 3.3k 1% 1.5W TC100 TR07 Tape & Reel - 7 reel | Bourns CMP2512AFX-3301ELF RoHS : Compliant |
| 0 | ||
| LW6MP-25MS | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| ESMQ421VSN121MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| EKMQ421VSN101MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| LA12-XLMP-25KLDM3 | TE Connectivity | Ind.Prox.-Switch LA12-XLMP-25KLDM3 RoHS : Compliant |
| 0 | ||
| ESMQ401VSN121MP25S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | IMP-250-22 | Orion Fans | Fan Accessories Metal Impeller for OAM Open Frame Motor Series, 250mm x 22 Degree |
| 50 | |
| CMP250PS24 | XP Power | Power Supply; AC-DC; 24V@10.4A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 8 | ||
| CMP250PS48 | XP Power | Power Supply; AC-DC; 48V@5.2A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 8 | ||
| MP25TA00 | Red Lion Controls | MP-25TA MAGNETIC SENSOR |
| 3 | ||
| SLPMP25-690 | Banner Engineering Corp | Safety Light Curtains Low Profile Muting Pair; Res.: 25 mm Response (Tr): 12.5 ms; Beams: 35; Rng: 0.1-7 m (4 in - 23 ft); ht. 690 mm (27.1 in); Integral RD |
| 1 | ||
| CMP250PS36 | XP Power | Power Supply; AC-DC; 36V@6.9A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3MP2547 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Solder, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Blunt Cut Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02002 Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB solder cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and blunt cut genderless on end 2. PE3MP2547 can also be known as a 1553 TRB female to blunt cut blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut blunt cut genderless cable assembly PE3MP2547 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack solder to blunt cut blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2547 can also be used in the other direction and will be blunt cut blunt cut genderless to TRB jack solder cable assembly if the opposite connectivity is required. 1553 TRB female solder to blunt cut blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002 cable. | 12 | ||
| PE3MP2542 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003 Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003 cable. | 10 | |||
| PE3MP2544 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003 Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003 cable. | 5 | |||
| PE3MP2540 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001 Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001 cable. | 5 | |||
| PE3MP2547-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Solder, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Blunt Cut Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02002, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB solder cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and blunt cut genderless on end 2. PE3MP2547-48 can also be known as a 1553 TRB female to blunt cut blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut blunt cut genderless cable assembly PE3MP2547-48 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack solder to blunt cut blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2547-48 can also be used in the other direction and will be blunt cut blunt cut genderless to TRB jack solder cable assembly if the opposite connectivity is required. 1553 TRB female solder to blunt cut blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02002, 48" cable. |
| 2 | ||
| PE3MP2542-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 24" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-24 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 24" cable. |
| 2 | ||
| PE3MP2542-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 12" cable. |
| 2 | ||
| PE3MP2542-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 36" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable. |
| 2 | ||
| PE3MP2542-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2542-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2542-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable. |
| 2 | ||
| PE3MP2546-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 24" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-24 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-24 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 24" cable. |
| 1 | ||
| PE3MP2546-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-12 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable. |
| 1 | ||
| PE3MP2544-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544-12 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544-12 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 12" cable. |
| 1 | ||
| PE3MP2546-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 36" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-36 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 36" cable. |
| 1 | ||
| PE3MP2544-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack with Blunt Cut for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2544-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2544-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2544-48 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack with blunt cut for 78 Ohm PE-30-02003, 48" cable. |
| 1 | ||
| PE3MP2543-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 36" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-36 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 36" cable. |
| 0 | ||
 Sager | IMP25M-73-XRR1 | Carling Technologies | Toggle Switches | 0 | ||
| MP2.5CPJ-1(40) | Hirose Electric Co Ltd | RF Connectors / Coaxial Connectors | 0 | |||
| LW6MP-25MS | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Blue |
| 0 | ||
| CMP-25BTUZL | Citizen Systems America Corporation | MOBILE PTR, CMP-25L MOBILE PRINTER, USB, ANDROID & IOS BLUETOOTH, ZPL |
| 0 | ||
| LW6MP-25Y | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Yellow |
| 0 | ||
| PMP250-13-3 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| MP-254064-10-8A | TE Connectivity | Labels and Industrial Warning Signs MP 1/.25 LABEL PRICE PER LABEL RoHS : Compliant |
| 0 | ||
| MP250-R | Panduit Corp | Wire Labels & Markers Marker Plate 2.50 x 075 | 0 | |||
| MP250W175-C | Panduit Corp | Wire Labels & Markers HARNESS IND MRKR PLATE 2.5 RoHS : Compliant |
| 0 | ||
| PMP250-16 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| 119-MP2.5S | TE Connectivity | TE Connectivity | 0 | |||
| PMP250-18 | TT Electronics / Power Partners | Desktop AC Adapters |
| 0 | ||
| MP250-C0 | Panduit Corp | Wire Labels & Markers Marker Plate 2.50 x 075 |
| 0 | ||
| MMP-25RM-1-CHP | TE Connectivity | TE Connectivity MMP-25RM-1-CHP | 0 | |||
| IMP2.510C2 | HellermannTyton | IDENTIFICATION MARKER PLATE, 2.5 X .75, NYLON, WHITE, 100/PKG |
| 0 | ||
 Vyrian | MP250W175-C | Panduit Corp | Labeling Materials RoHS : Compliant | 12,516 | ||
| LP3875EMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.55V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 8,260 | |||
| LM2937IMP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, BIPolar, PDSO4 RoHS : Not Compliant | 8,122 | |||
| LP3964EMP-2-5-NOPB | Texas Instruments | 7,934 | ||||
| LP38693MP-2.5 | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.725V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 7,510 | |||
| MT42L64M32D2MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX32, CMOS, PBGA220 RoHS : Compliant | 6,628 | |||
| MT42L256M16D1MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX16, CMOS, PBGA220 | 6,397 | |||
| LP3872EMP-2-5-NOPB | Texas Instruments | 6,323 | ||||
| LM2937IMP-2-5 | Texas Instruments | 5,713 | ||||
| MT42L64M64D3MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX64, CMOS, PBGA220 RoHS : Compliant | 5,486 | |||
| MT42L64M64D1MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX64, CMOS, PBGA220 RoHS : Compliant | 4,343 | |||
| LP3875EMP-2-5 | Texas Instruments | 4,318 | ||||
| MT42L256M32D1MP-25IT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX32, CMOS, PBGA220 | 4,230 | |||
| MT42L128M64D3MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX64, CMOS, PBGA220 | 2,401 | |||
| ELXQ451VSN820MP25S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 82uF, Through Hole Mount | 702 | |||
 Win Source Electronics | UCLAMP2501T.TCT | Semtech Corporation | Low Voltage Clamp 2.5V TVS Diode RoHS : Compliant |
| 125,888 | |
| MP2562DS-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 1A 8SOIC RoHS : Compliant |
| 50,000 | ||
| RCLAMP2504N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 15VC 10SLP RoHS : Compliant |
| 28,080 | ||
| RCLAMP2574N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 20VC 10SLP / ESD Suppressor Diode Diode Array Uni-Dir 2.5V 10-Pin SLP EP T/R RoHS : Compliant |
| 27,000 | ||
| MP2560DN-LF | Monolithic Power Systems | IC REG BUCK ADJ 2.5A RoHS : Compliant |
| 25,000 | ||
| MP2560DN-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 2.5A 8SOICE RoHS : Compliant |
| 23,150 | ||
| LM1117MP-2.5 | National Semiconductor Corporation | IC REG LINEAR FIXED POS LDO REG RoHS : Not Compliant |
| 13,070 | ||
| RCLAMP2502L.TBT | Semtech Corporation | TVS DIODE 2.5VWM 20VC 8SOIC RoHS : Compliant |
| 7,900 | ||
| MP2562DS-LF | Monolithic Power Systems | IC REG BUCK ADJ 1A 8SOIC RoHS : Compliant |
| 5,600 | ||
MP2565DQ-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 2.5A 10QFN RoHS : Compliant |
| 5,000 | ||
| LM2937IMP-2.5 | Texas Instruments | LM2937-2.5, LM2937-3.3 400mA and 500mA Voltage Regulators | IC REG LIN 2.5V 400MA SOT223-4 RoHS : Not Compliant |
| 2,905 | ||
| LP3964EMP-2.5 | Texas Instruments | LP396x 800-mA Fast Ultra-Low-Dropout Linear Regulators | IC REG LIN 2.5V 800MA SOT223-5 RoHS : Not Compliant |
| 2,000 | ||
| LP3961EMP-2.5 | Texas Instruments | LP396x 800-mA Fast Ultra-Low-Dropout Linear Regulators | IC REG LIN 2.5V 800MA SOT223-5 RoHS : Not Compliant |
| 1,346 | ||
| LP3961EMP-2.5/NOPB | Texas Instruments | IC REG LDO 2.5V 0.8A SOT223-5 RoHS : Compliant |
| 1,340 | ||
| LM2937IMP-2.5/NOPB | Texas Instruments | IC REG LDO 2.5V 0.4A SOT223 RoHS : Compliant |
| 899 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼ 
English
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand