| 数据搜索系统,热门电子元器件搜索 |
|
P136.. 销售商 |
| 销售商 | 部件名 | 制造商 | 功能描述 | Price | Qty. BuyNow | |
![]() DigiKey | NCP136AFCT088T2G | onsemi | IC REG LIN 0.88V 700MA 6-WLCSP RoHS : Compliant |
| 8,500 | |
| NCP136AFCT088T2G | onsemi | IC REG LIN 0.88V 700MA 6-WLCSP RoHS : Compliant |
| 8,500 | ||
| NCP136AFCT088T2G | onsemi | IC REG LIN 0.88V 700MA 6-WLCSP RoHS : Compliant |
| 8,500 | ||
| SCIHP1367-3R3M | Signal Transformer Inc | FIXED IND 3.3UH 15A 6.8 MOHM SMD |
| 7,705 | ||
| SCIHP1367-3R3M | Signal Transformer Inc | FIXED IND 3.3UH 15A 6.8 MOHM SMD |
| 7,705 | ||
| SCIHP1367-3R3M | Signal Transformer Inc | FIXED IND 3.3UH 15A 6.8 MOHM SMD |
| 7,705 | ||
| NCP1050P136G | Rochester Electronics LLC | IC OFFLINE SWITCH FLYBACK 7DIP |
| 5,109 | ||
| NCP1361EABAYSNT1G | onsemi | IC OFFLINE SWITCH FLYBACK 6TSOP RoHS : Compliant |
| 2,895 | ||
| AP-136/3 | Amphenol Nexus | CONN PLUG FMALE 6POS GOLD CRIMP |
| 380 | ||
| P136-001 | Tripp Lite | DISPLAYPORT TO HDMI RoHS : Compliant |
| 278 | ||
| MSSP-13687-T | Micro-Mode Products Inc | SMPM PLUG STR 50 OHM GLASSED SMD |
| 100 | ||
| 0241-P136 | Dinkle Enterprises | 18+18 Position Interface Module RoHS : Compliant |
| 45 | ||
| 185CP136 | INDUSTRIALSUPPLIES.COM | LOWER SHELF FOR EURO BENCH, 72"W |
| 28 | ||
| HP1-36-A1A1-2C | North Slope Chillers | XP 36" Heat Exchanger,208V,3 |
| 20 | ||
| P136-000-1-JVP | JAMECO ELECTRONICS | ADAPTER,DISPLAYPORT(M)/HDMI(F) |
| 3 | ||
![]() Verical | P 136 | Lumberg Connect GmbH | Conn Modular Jack RCP 8 POS 2.54mm Solder ST Thru-Hole 8 Terminal 1 Port Tray RoHS : Compliant |
| 840 | |
| P136-06N-H2V2LB | Eaton Corporation | Display Port to HDMI 2.0 Active Adapter - M/F, Latching Connector RoHS : Exempt |
| 18 | ||
| P136-06N-HV-V2 | Eaton Corporation | Display Port 1.2 to VGA/HDMI All-in-One Converter RoHS : Exempt |
| 3 | ||
![]() Arrow Electronics | P 136 | Lumberg Connect GmbH | Conn Modular Jack RCP 8 POS 2.54mm Solder ST Thru-Hole 8 Terminal 1 Port Tray RoHS : Compliant |
| 847 | |
| P136-06N-HV-V2 | Eaton Corporation | Display Port 1.2 to VGA/HDMI All-in-One Converter RoHS : Exempt |
| 3 | ||
![]() Newark | MP-13-60-6 DGZ | SPC Multicomp | CONN RF/COAX, BNC COAXIAL, R/A JACK; RoHS : Compliant |
| 11,615 | |
| MP-13-60-4 DGZ | SPC Multicomp | CONN RF/COAX, BNC COAXIAL, R/A JACK; RoHS : Compliant |
| 5,124 | ||
| MP-136 | SPC Multicomp | DC POWER CONN, MULTICOMP PRO MP-136; RoHS : Compliant |
| 4,124 | ||
| NCP136AFCT120T2G | onsemi | LDO, FIXED, 1.2V, 0.7A, -40 TO 85DEG C; RoHS : Compliant |
| 3,437 | ||
| NCP136AFCT120T2G | onsemi | LDO, FIXED, 1.2V, 0.7A, -40 TO 85DEG C; RoHS : Compliant |
| 3,437 | ||
| MP-13-60-7 DGZ | SPC Multicomp | CONN RF/COAX, BNC COAXIAL, STRAIGHT JACK; RoHS : Compliant |
| 2,190 | ||
| NCP136AFCT105T2G | onsemi | LDO VOLTAGE REGULATORS; RoHS : Compliant |
| 1,590 | ||
| NCP136AFCT105T2G | onsemi | LDO VOLTAGE REGULATORS; RoHS : Compliant |
| 1,590 | ||
| MP-13-60-1 DGZ | SPC Multicomp | CONN RF/COAX, BNC COAXIAL, STRAIGHT JACK; RoHS : Compliant |
| 1,487 | ||
| FMC1919315/SP1-36 | Fairview Microwave Inc | RoHS : Not Compliant |
| 1,001 | ||
| TSOP13636 | Vishay Intertechnologies | IR RECEIVER, 30M, 0.08MW/M2, SIDE TH; RoHS : Compliant |
| 228 | ||
| FMC0421085/SP1-36 | Fairview Microwave Inc | RoHS : Not Compliant |
| 131 | ||
| AP-136/3 | Amphenol Nexus | CIRCULAR CONN, PLUG, 6POS, CABLE; RoHS : Compliant |
| 50 | ||
| GP136GY | Hammond Manufacturing | RoHS : Compliant |
| 37 | ||
| GP136LG | Hammond Manufacturing | RoHS : Compliant |
| 6 | ||
![]() RS | P 136 | Lumberg Connect GmbH | MODULAR CHASSIS SOCKET, 8P8C (RJ45), UPRIGHT, FULL SHIELDING AND FLANGE, FOR PCB |
| 400 | |
P136-000![]() | Tripp Lite | TRIPP LITE 6 INCH DISPLAYPORT TO HDMI ADAPTER DISPLAYPORT MALE HDMI FEMALE |
| 18 | ||
| P136-06N-H2V2 | Tripp Lite | DISPLAYPORT 1.2 TO HDMI ACTIVE CONVERTER M/F;4K X 2K @ 60 HZ;HDMI 2.0;6 IN. RoHS : Compliant |
| 4 | ||
| NSYEBAP13618 | Schneider Electric | POWER DISTRIBUTION BLOCK, 335A, PANEL MOUNT, THERMOPLASTIC, 600V, NSYEB SERIES RoHS : Compliant |
| 2 | ||
P136-06N-HV-V2![]() | Tripp Lite | TRIPP LITE DISPLAYPORT TO HDMI VGA ADAPTER CONVERTER 4K DP TO HDMI VGA 6" RoHS : Compliant |
| 2 | ||
| P136-001 | Tripp Lite | DISPLAYPORT TO HDMI ADAPTER CONVERTER 1080P DP TO HDMI M/F 1FT RoHS : Compliant |
| 1 | ||
| AP1-36 | Dwyer Instruments Inc | PROBE, THERMO ANEMOMETER AIR VELOCITY & TEMPERATURE PROBE W/COILED CABLE; 36 IN |
| 1 | ||
P136-000-1![]() | Tripp Lite | DISPLAYPORT TO HDMI CONVERTER VIDEO ADAPTER 1920X1200/1080P M/F RoHS : Compliant |
| 1 | ||
P136-000-UHD-V2![]() | Tripp Lite | TRIPP LITE DISPLAYPORT TO HDMI ADAPTER CONVERTER 4K ACTIVE DP TO HDMI M/F |
| 1 | ||
| P136-06N-H2V2LB | Tripp Lite | TRIPP LITE DISPLAYPORT TO HDMI ADAPTER CONVERTER 4K, DP 1.2 TO HDMI 2.0 M/F RoHS : Compliant |
| 1 | ||
| BRP136 | OPTIBELT GmbH | V-BELT, B' SECTION, 139" OUTER LENGTH, 5/8" WIDTH |
| 0 | ||
| 2RCP136 | Altra Industrial Motion Corp | 2RCP136 BAND V-BELT |
| 0 | ||
NCP1055P136G![]() | onsemi | GATED OSC. REGULATOR 680MA 136KHZ PDIP8 RoHS : Compliant |
| 0 | ||
| 20P1-36A1DC-XXN | Fabco-Air | CYLINDER, TIE ROD, 2" BORE, 36" STROKE, FIXED CLEVIS, NFPA SERIES |
| 0 | ||
| WTB4S-3P1361 (1042043) | SICK AG | PHOTOELECTRIC SENSOR, PROXIMITY, BCKGRD SUPPRS,10-180 MM,650 NM, PNP, CBL,3WIRE,2 M |
| 0 | ||
![]() Bisco Industries | P1367-M12-F21-1420 | UNICORP | 227 | |||
| BACW10P136AL | Boeing | 20 | ||||
![]() Onlinecomponents.com | P136-06N-H2V2LB | Eaton Tripp Lite | RoHS : Compliant |
| 19 | |
| P136-000 | Eaton Tripp Lite | Cable Assembly Video 0.152m Display Port to HDMI M-F RoHS : Compliant |
| 1 | ||
| P136-001 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-HDV4K6 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-HVV2BP | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-000-BP | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-HDV-4K | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-UHD-V2 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-HV-V2 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-H2V2 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-06N-HDR-W | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-000-1 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
| P136-000-UHD-V2 | Eaton Tripp Lite | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | NCP1050P136G![]() | onsemi | Monolithic High Voltage Gated Oscillator Power Switching Regulator RoHS : Compliant |
| 5,109 | |
| NCP1361EABAYSNT1G | onsemi | Off-Line Converter and Switch Flyback SOT-23-6 T/R RoHS : Compliant |
| 297,708 | ||
| NCP136CFCT120T2G | onsemi | LDO Regulator, 700mA, Ultra Low Drop Out Bias Rail, 1% Accuracy, Fast Transient Response 1.2V, Slow Turn-On Slew Rate, WLCSP6 RoHS : Compliant |
| 5,000 | ||
| NCP1053XP136 | onsemi | MONOLITHIC HIGH VOLTAGE GATED OSCILLATOR POWER SwitchING REGULATOR RoHS : Not Compliant |
| 2,100 | ||
| NCP1366BABAYDR2G | onsemi | Low Power Offline Constant Current PWM Current-Mode Controller with High Voltage Startup Current Source RoHS : Compliant |
| 50,488 | ||
| NCP1362AADR2G | onsemi | Primary Side PWM Controller for Low Power Offline SMPS QR PSR, No Clamp RoHS : Compliant |
| 7,187 | ||
NCP1052P136![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant |
| 8,605 | ||
NCP1055P136![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant |
| 461 | ||
| NCP136AFCT080T2G | onsemi | LDO Regulator, 700mA, Ultra Low Drop Out Bias Rail, 1% Accuracy, Fast Transient Response 0.8V, Normal Turn-On Slew rate, WLCSP6 RoHS : Compliant |
| 804,000 | ||
| NCP136AFCT110T2G | onsemi | LDO Regulator, 700mA, Ultra Low Drop Out Bias Rail, 1% Accuracy, Fast Transient Response 1.1V, Normal Turn-On Slew Rate, WLCSP6 RoHS : Compliant |
| 285,000 | ||
| NCP1361AABAYSNT1G | onsemi | Low Power Offline Constant Current PWM Current-Mode Controller RoHS : Compliant |
| 48,000 | ||
NCP1054P136G![]() | onsemi | Monolithic High Voltage Gated Oscillator Power Switching Regulator RoHS : Compliant |
| 4 | ||
NCP1053P136![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant |
| 1,150 | ||
NCP1050P136![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant |
| 2,985 | ||
| NCP136BFCT080T2G | onsemi | Fixed/Adjustable Positive LDO Regulator RoHS : Compliant |
| 145,000 | ||
![]() TME | ASP-136899-05 | Samtec Inc | ASP-136899-05 |
| 1,250 | |
| TSOP13636 | Vishay Intertechnologies | Integrated IR receiver; 36kHz; 45° RoHS : Compliant |
| 718 | ||
| SCIHP1367-2R2M | Bel Power Solutions | Inductor: wire; SMD; 2.2uH; Ioper: 20A; ±20%; 13.8x12.9mm; Isat: 33A |
| 500 | ||
| SCIHP1367-220M | Bel Power Solutions | Inductor: wire; 22uH; ±20%; 45mΩ |
| 233 | ||
| OV-IP/1.36 | TEKO Enclosures Inc | Enclosure: for remote controller; OV-IP; IP65; X: 44mm; Y: 56mm |
| 12 | ||
| CP136 | Logilink | Cable; H05VV-F; CEE 7/7 (E/F) plug angled,cables; 1.5m; white |
| 2 | ||
| LB L293-M2P1-36-1-Z | ams OSRAM Group | LED; blue; SMD; 0603; 22.4÷56mcd; 2.75÷3.5VDC; 1.7x0.8x0.65mm; 135° |
| 0 | ||
| NCP136AFCT105T2G | onsemi | IC: voltage regulator; LDO,linear,fixed; 1.05V; 700mA; WLCSP6; SMD RoHS : Compliant |
| 0 | ||
| CP13666_LARISA-RZ-CLIP16 | LEDIL | LED lens; square; transparent; Mounting: clip; Colour: black; 7.5mm |
| 0 | ||
| P 1363 | PeakTech Prüf- und Messtechnik GmbH | Oscilloscope: digital; Ch: 2; 300MHz; 2,5Gsps; 40Mpts; LCD TFT 8" |
| 0 | ||
| OP1363000000G | Amphenol Anytek | Connector: pin strips; pin header; male; PIN: 13; THT; 10A; 300V |
| 0 | ||
| P 1362 | PeakTech Prüf- und Messtechnik GmbH | Oscilloscope: digital; Ch: 2; 200MHz; 2Gsps; 40Mpts; LCD TFT 8" |
| 0 | ||
| P 1360 | PeakTech Prüf- und Messtechnik GmbH | Oscilloscope: digital; Ch: 2; 100MHz; 1Gsps; 40Mpts; LCD TFT 8" |
| 0 | ||
![]() ComSIT USA | TIP136![]() | Bourns Inc | PNP SILICON POWER DARLINGTON Power Bipolar Transistor, 8A I(C), 80V V(BR)CEO, 1-Element, PNP, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Not Compliant | 690 | ||
| ISP1362BD | Ericsson | Bus Controller, PQFP64 RoHS : Not Compliant | 42 | |||
![]() Interstate Connecting Components | AP-136/3 | Amphenol Nexus | 6 COND AUDIO PLUG, CRIMP AP-136/3 |
| 0 | |
| AP-136AR | Amphenol Nexus | Audio Plug | 0 | |||
| AP-136AR | Amphenol Nexus | 0 | ||||
| AP-136 | Amphenol Nexus | 6 COND AUDIO PLUG, CRMP, AP-136/3 | 0 | |||
| AP-136 | Amphenol Nexus | Audio Plug | 0 | |||
| 791-001PN-153MEP-1362 | Glenair Inc | D-SUB ADD $1700 QCD 9133 | 0 | |||
| AP-136SE | Amphenol Nexus | Audio Plug |
| 0 | ||
| AP-136SE | Amphenol Nexus | Audio Plug |
| 0 | ||
| AP-136RAEU | Amphenol Nexus | 0 | ||||
| AP-136-5 | Amphenol Nexus | CLAMP SHIELD INNER NICKEL PLATED BRASS | 0 | |||
| AP-136RA/4 | Amphenol Nexus | Audio Plug | 0 | |||
| OP1363000000G | Amphenol Anytek | OP - 8.0 - 13P 11.5MM TIN-PLA | 0 | |||
| AP-136RAR | Amphenol Nexus | 0 | ||||
| AP-136-6 | Amphenol Nexus | CLAMP SHIELD, OUTER NICKEL PLATED BRASS | 0 | |||
| AP-136/1 | Amphenol Nexus |
| 0 | |||
![]() PEI Genesis | AP-136/3 | Amphenol Corporation |
| 0 | ||
| AP-136RA-2 | Amphenol Corporation |
| 0 | |||
| TP1368 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| MSSP-13687-T | ITT Interconnect Solutions |
| 0 | |||
| TP1362 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TP1364 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| AP-136/1 | Amphenol Corporation |
| 0 | |||
| AP-136RA-5 | Amphenol Corporation |
| 0 | |||
| AP-136RA-1 | Amphenol Corporation |
| 0 | |||
| AP-136RAOM | Amphenol Corporation |
| 0 | |||
| AP-136RA-3 | Amphenol Corporation |
| 0 | |||
| TP1367 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TP1365 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TP1366 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| AP-136EU | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | ASP-136899-05 | Samtec Inc | Header / Socket Strip |
| 825 | |
| ASP-136244-02 | Samtec Inc | Header / Socket Strip |
| 630 | ||
| GP136GY | Hammond Manufacturing | GLAND PLATE GRAY 339 X 149 RoHS : Compliant |
| 10 | ||
![]() Chip 1 Exchange | NCP1361EABAYSNT1G | onsemi | INSTOCK RoHS : Compliant | 7,337 | ||
| NCP1362ABDR2G | onsemi | INSTOCK RoHS : Compliant | 2,938 | |||
ISP1362BDTM![]() | ST-Ericsson | INSTOCK RoHS : Compliant | 600 | |||
NCP1052P136G![]() | onsemi | INSTOCK RoHS : Compliant | 335 | |||
| ASP-136148-01 | Samtec Inc | INSTOCK | 166 | |||
| ASP-136772-01 | INSTOCK | 149 | ||||
| ISP1362BDTM | NXP Semiconductors | INSTOCK | 70 | |||
![]() Component Electronics, Inc | MP-1-3.6864MHZ | MtronPTI | IN STOCK SHIP TODAY |
| 283 | |
![]() DB Roberts | 13SP136 | Essentra Components | ROUND SPACER, .140 ID, .313 OD | 0 | ||
| EFTP136160A | Essentra Components | TAPERED PLUG 1.36 X 1.60PAPER | 0 | |||
| 13SP136B | Essentra Components | ROUND SPACER, .140 ID, .313 OD | 0 | |||
![]() EBV Elektronik | NCP1362AADR2G | onsemi | Primary Side PWM Controller for Low Power Offline SMPS QR PSR No Clamp (Alt: NCP1362AADR2G) RoHS : Compliant | 0 | ||
| NCP1362ABDR2G | onsemi | Primary Side PWM Controller for Low Power Offline SMPS QR PSR 110 kHz Clamp (Alt: NCP1362ABDR2G) RoHS : Compliant | 0 | |||
| CP13682_RGBX2-S | LEDIL | Round Lens Assembly For XML RGB LED (Alt: CP13682_RGBX2-S) RoHS : Compliant | 0 | |||
| NCP136CFCT120T2G | onsemi | LDO Regulator 700mA Ultra Low Drop Out Bias Rail 1 Accuracy Fast Transient Response 12V (Alt: NCP136CFCT120T2G) RoHS : Compliant | 0 | |||
| NCP1366BABAYDR2G | onsemi | Low Power Offline Constant Current PWM CurrentMode Controller with High Voltage Startup Current Source (Alt: NCP1366BABAYDR2G) RoHS : Compliant | 0 | |||
| NCP1365BABCYDR2G | onsemi | Low Power Offline Constant Current Constant Voltage Primary Side PWM CurrentMode Controller with High Voltage Startup Current Source (Alt: NCP1365BABCYDR2G) RoHS : Compliant | 0 | |||
| NCP1365ACBAXDR2G | onsemi | Low Power Offline Constant Current Constant Voltage Primary Side PWM CurrentMode Controller with High Voltage Startup Current Source (Alt: NCP1365ACBAXDR2G) RoHS : Compliant | 0 | |||
| NCP136AFCT120T2G | onsemi | LDO Regulator 700mA Ultra Low Drop Out Bias Rail 1 Accuracy Fast Transient Response 12V (Alt: NCP136AFCT120T2G) RoHS : Compliant | 0 | |||
| NCP1366AABAYDR2G | onsemi | Low Power Offline Constant Current PWM CurrentMode Controller with High Voltage Startup Current Source (Alt: NCP1366AABAYDR2G) RoHS : Compliant | 0 | |||
| NCP1361EABAYSNT1G | onsemi | Low Power Offline Constant Current PWM CurrentMode Controller (Alt: NCP1361EABAYSNT1G) RoHS : Compliant | 0 | |||
| CP13666_LARISA-RZ-CLIP16 | LEDIL | Square Lens Assembly For LUXEON Z XQE LUXEON Z ES XBD Duris S5 LEDs (Alt: CP13666_LARISA-RZ-CLIP16) RoHS : Compliant | 0 | |||
![]() FDH Electronics | P136PS1RT | FDH Electronics | Intro Placehldr | 299 | ||
| AP-136 | Amphenol Nexus | Circular Conn |
| 64 | ||
| AP-136RA | Amphenol Nexus | Circular Conn |
| 18 | ||
| AP-136/3 | Amphenol Nexus | Circular Conn |
| 9 | ||
![]() Flip Electronics | NCP1361EABAYSNT1G | onsemi | Stock RoHS : Compliant | 207,000 | ||
| NCP136AFCT080T2G | onsemi | Stock, Ship Today RoHS : Compliant | 204,738 | |||
| NCP136AFCT110T2G | onsemi | Stock, Ship Today RoHS : Compliant | 169,071 | |||
| NCP136CFCT120T2G | onsemi | Stock, Ship Today RoHS : Compliant | 120,000 | |||
| NCP136AFCT120T2G | onsemi | Stock, Ship Today RoHS : Compliant | 120,000 | |||
| NCP1360BACCYSNT1G | onsemi | Stock, Ship Today RoHS : Compliant | 119,980 | |||
| NCP1365BABCYDR2G | onsemi | Stock RoHS : Compliant | 85,000 | |||
| NCP1365AABCYDR2G | onsemi | Stock, Ship Today RoHS : Compliant | 35,000 | |||
| NCP1365ACBAXDR2G | onsemi | Stock, Ship Today RoHS : Compliant | 32,500 | |||
| NCP1362AADR2G | onsemi | Stock RoHS : Compliant | 30,000 | |||
| NCP136AFCT088T2G | onsemi | Stock, Ship Today RoHS : Compliant | 20,000 | |||
| NCP1361BABAYSNT1G | onsemi | Stock, Ship Today RoHS : Compliant | 18,000 | |||
| NCP1366AABAYDR2G | onsemi | Stock, Ship Today RoHS : Compliant | 7,021 | |||
| NCP136BFCT080T2G | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
| NCP136AFCT105T2G | onsemi | Stock, Ship Today RoHS : Compliant | 4,940 | |||
![]() Master Electronics | CLP-136-02-L-D-A | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | |
| CLP-136-02-L-D-P-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-A-P | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-BE-A-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-LM-D | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| ASP-136961-03 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SCIHP1367-100M | Signal Transformer Inc | ROHS3Compliant Wirewound Active 2009 fixed air core inductor -55C~125C 200kHz 18.5mOhm Max 10muH RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-P | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-G-D-BE-P-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-FM-D-BE | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-BE-PA-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
CLP-136-02-G-D-A![]() | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-K-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-136-02-S-D-BE | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
CLP-136-02-F-D-A-K![]() | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
![]() Neutron USA | P136-000-1![]() | Tripp Lite | Tripp Lite DisplayPort to HDMI Converter Video Adapter, 1920x1200/1080P (M/F) RoHS : Compliant |
| 588 | |
P136-000![]() | Tripp Lite | Tripp Lite DisplayPort to HDMI Converter |
| 588 | ||
P136-06N-HV-V2![]() | Tripp Lite | DISPLAYPORT TO HDMI VGA ADAPTER CONVERTER 4KX2K DP TO HDMI VGA RoHS : Compliant |
| 371 | ||
| P136-06N-H2V2LB | Tripp Lite | DISPLAYPORT TO HDMI ADAPTER 4K CONVERTER DP 1.2 TO HDMI 2.0 M/F RoHS : Compliant |
| 214 | ||
P136-06N-HDV-4K![]() | Tripp Lite | Tripp Lite P136-06N-HDV-4K DisplayPort/HDMI/DVI/VGA Audio/Video Cable RoHS : Compliant |
| 145 | ||
P136-000-UHD-V2![]() | Tripp Lite | Tripp Lite DisplayPort to HDMI 4K Video Adapter A/V Converter DP to HDMI |
| 123 | ||
P136-06N-UHD-V2![]() | Tripp Lite | DISPLAYPORT 1.2 TO HDMI ADAPTER ACTIVE CONVERTER UHD 4K X 2K 6IN |
| 85 | ||
| P136-001 | Tripp Lite | 1FT DISPLAYPORT TO HDMI ADAPTER CONVERTER 1080P DP TO HDMI M/F RoHS : Compliant |
| 50 | ||
| P136-06N-H2V2 | Tripp Lite | DISPLAYPORT TO HDMI ADAPTER M/F ACTIVE CONVERTER UHD 4K X 2K 60HZ RoHS : Compliant |
| 5 | ||
| P136-06N-HDR-W | Tripp Lite | DISPLAYPORT TO HDMI 4K ADAPTER 60 HZ DP 1.2 HDMI 2.0 HDCP 2.2 M/F RoHS : Compliant |
| 2 | ||
| P136-000-BP | Tripp Lite | 50PK DISPLAYPORT TO HDMI ADAPTER VIDEO CONVERTER 1080P M/F RoHS : Compliant |
| 1 | ||
| GP136LG | Hammond Manufacturing | Electrical Enclosure Accessories Gland plate Gray for 12.13 x 4.63 opening - Steel/Lt Gray RoHS : Compliant |
| 1 | ||
| P136-06N-HDV4K6 | Tripp Lite | DISPLAYPORT TO VGA/DVI/HDMI ADAP CONVERTER DP 1.2 4K X 2K 60HZ RoHS : Compliant |
| 0 | ||
| WTB2S-2P1360 | SICK AG | Proximity Sensor,Photoelectric,Rectangular,5 mm-60 mm,Red Light,640 nm,PNP |
| 0 | ||
| TP1366 | Daniels Manufacturing Corporation (DMC) | Crimpers / Crimping Tools Single Position Head Use with GS222 |
| 0 | ||
![]() Pasternack Enterprises US | PE3W02628/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W02628/SP1-36 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02628/SP1-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W02628/SP1-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 4,354 | |
| PE3C1360/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1360/SP1-36 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1360/SP1-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1360/SP1-36 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock. |
| 2,518 | ||
| PE3C2252LF/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with 90 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 90 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 90 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP1-36 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP1-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP1-36 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 36 inch length using LMR-240 coax with 90 deg. clock, LF solder. |
| 2,518 | ||
| PE3W04147/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-DB Coax with 180 Deg. Clock., Radio frequency assembly N male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-DB coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-DB coax with 180 deg. clock, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04147/SP1-36 can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W04147/SP1-36 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04147/SP1-36 can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-DB coax with 180 deg. clock. |
| 2,418 | ||
| PE3C1732/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1732/SP1-36 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1732/SP1-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock. |
| 2,320 | ||
| PE3C0107/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400 Coax with HeatShrink and 270 Deg. Clock., Radio frequency assembly N male right angle to N male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink and 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink and 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0107/SP1-36 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0107/SP1-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0107/SP1-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,140 | ||
| PE3W10718/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 36Inch Using LMR-400 Coax With Times Microwave Parts HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 36Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable 36Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle type N cable connection on the other. Our low loss right angle TNC to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1-36 can also be known as a low loss right angle TNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W10718/SP1-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1-36 can also be used in the other direction and will be right angle type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable 36Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock. |
| 938 | ||
| PE3W01725-SP1-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm Push-On MCX Plug Right Angle Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. This BNC to MCX cable is a female to plug coax assembly, PE3W01725-SP1-36, can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE3W01725-SP1-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01725-SP1-36 can also be used in the other direction and will be right angle MCX plug to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 36 inch length using 75 Ohm RG179 coax. |
| 340 | ||
| PE3C5193/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 36 Inch Length Using PE-P086 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 36 inch length using PE-P086 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 36 inch length using PE-P086 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5193/SP1-36 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5193/SP1-36 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5193/SP1-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5193/SP1-36 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 202 | ||
| PE3C0988/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to N Male Right Angle Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly N male right angle to N male right angle cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to N male right angle cable 36 inch length using LMR-195 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and right angle N type cable connection on the other. Our right angle type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C0988/SP1-36, can also be known as a right angle type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0988/SP1-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle cable 36 inch length using LMR-195 coax. |
| 0 | ||
| PE3W00390/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 36 Inch Length Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable 36 inch length using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable 36 inch length using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1-36 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1-36 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1-36 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06854-SP1-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 36 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-36, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-36 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 36 inch length using LMR-195 coax with heatshrink. |
| 0 | ||
| PE3C3261/SP1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-195 Coax with 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 36 inch length using LMR-195 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to N male right angle low loss cable 36 inch length using LMR-195 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type cable connection on the other. Our TNC to type N cable assembly has male gender on end 1 and male on end 2. PE3C3261/SP1-36 can also be known as a TNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. TNC plug to type N plug cable assembly PE3C3261/SP1-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C3261/SP1-36 RF cable are available on our downloadable PDF datasheet.PE3C3261/SP1-36 can also be used in the other direction and will be type N male to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 0 | ||
![]() Sager | CLP-136-02-L-D-A | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | |
| CLP-136-02-L-D-P-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-A-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CLP-136-02-L-D-A-P | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-D-BE-A-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CLP-136-02-LM-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SCIHP1367-22M | Signal Transformer Inc | Power Inductors - SMD SMD Inductor Lighting & Notebook |
| 0 | ||
| PP13-61-15.0A-XX-V | Sensata Circuit Breakers | Sensata Technologies | 0 | |||
| IPAP-1-36588-5 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| RF316-01RP1-02RP1-3658 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 316 Cable RoHS : Compliant | 0 | |||
| RF174-03SP1-03RP1-3600 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 174 Cable RoHS : Compliant | 0 | |||
| SCIHP1367-100M | Signal Transformer Inc | Power Inductors - SMD Inductor SMD 10.0uH 15.5A18.5mohms200KHz |
| 0 | ||
| CLP-136-02-L-D-P | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-136-02-L-DH-FR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CLP-136-02-G-D-BE-P-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TE Connectivity | BACA-AMP-136 | TE Connectivity | 10POS,MICRO MNL,RCPT HSG Number of Positions: 10 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Wire-to-Wire Standard Rectangular Connector | 10 Receptacle Housing Crimp | Part Number: BACA-AMP-136 | Internal Number: 1-794617-0 | TE Connectivity RoHS : Compliant |
| 7,003 | |
![]() Vyrian | NCP1050P136![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant | 11,088 | ||
NCP1051P136![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant | 10,335 | |||
NCP1055P136G![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Compliant | 8,847 | |||
NCP1054P136G![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Compliant | 8,584 | |||
| NCP136AFCRC040T2G | onsemi | Fixed Positive LDO Regulator, 0.4V, 0.06V Dropout, CMOS, PBGA6 RoHS : Compliant | 7,135 | |||
NCP1053P136G![]() | onsemi | Switching Regulator, Voltage-mode, 2A, 154kHz Switching Freq-Max, PDIP8 RoHS : Compliant | 6,268 | |||
| NCP1360AABCYSNT1G | onsemi | Switching Controller, Current-mode, 130kHz Switching Freq-Max, CMOS, PDSO6 RoHS : Compliant | 5,785 | |||
| NCP1366EABAYDR2G | onsemi | Switching Controller, Current-mode, 130kHz Switching Freq-Max, CMOS, PDSO7 RoHS : Compliant | 4,760 | |||
| TIP136 | Texas Instruments | Transistor RoHS : Not Compliant | 4,191 | |||
| GV3P136 | Schneider Electric | 3 Pole(s), 13A, 690VAC, Panel Mount/din-rail Mount RoHS : Compliant | 622 | |||
P136-000![]() | Tripp Lite | Cable Assembly | 564 | |||
![]() Wuhan P&S | NCP136AFCT105T2G | onsemi | RoHS : Compliant |
| 80,000 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |