PI49FCT32803 datasheet(2/6 Pages) PERICOM

2 / 6 page

PS8704A

9/22/04

PI49FCT32802

PI49FCT32803

1:5/1:7 3.3V CMOS Clock Drivers

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional operation

of the device at these or any other conditions above those

indicated in the operational sections of this specification is

not implied. Exposure to absolute maximum rating condi-

tions for extended periods may affect reliability.

Storage Temperature ............................................................–65°C to +150°C

Ambient Temperature with Power Applied ...........................–40°C to +85°C

Supply Voltage to Ground Potential........................................–0.5V to +5.5V

DC Input Voltage ....................................................................–0.5V to +5.5V

DC Output Current............................................................................... 120mA

Power Dissipation ................................................................................... 0.5W

Notes:

For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

Typical values are at VCC = 3.3V, +25°C ambient and maximum loading.

VOH = VCC – 0.6V at rated current.

This parameter is determined by device characterization but is not production tested.

Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

DC Electrical Characteristics (Over the Operating Range)

Symbol

Description

Test Conditions(1)

Min.

Typ.

Max.

Units

VOH

Output HIGH voltage VCC=3V,VIN=VIH or VIL

IOH = –8mA

2.4

–

VOL

Output LOW voltage

VCC=3V, VIN=VIH or VIL

IOL = 12mA

–

0.4

0.5

VIH

Input HIGH voltage

Guaranteed Logic HIGH Level (Input Pins)

–

5.5

VIL

Input LOW voltage

Guaranteed Logic LOW Level (Input Pins)

–0.5

–

0.8

IIH

Input HIGH current

VCC = 3.6V

VIN = 3.6V

–

µA

IIL

Input LOW current

VCC = 3.6V

VIN = 0V

–

–1

VIK

Clamp diode voltage

VCC = Min., IIN = –18mA

–

–0.7

–1.2

IOH

Output HIGH current VCC = 3.3V, VIN = VIH or VIL, VOUT = 1.5V(5)

–25

–45

–80

IOL

Output LOW current

VCC = 3.3V, VIN = VIH or VIL, VOUT = 1.5V(5)

IOS

Short circuit current(5) VCC = Max., VOUT = GND(5)

–50

–100

–180

Input Hysteresis

–

150

–

Series Resistor

Ω

PI49FCT32803 数据表(PDF) 2 Page - Pericom Semiconductor Corporation

PI49FCT32803 数据表(HTML) 2 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6

数据表下载