SPWF04SA, SPWF04SC

Regulatory compliance

DocID029757 Rev 5

21/27

Table 10: Antennas used for certification of SPWF04SC

Product name

Titanis 2.4 GHz

Article No.

2010B4844-01 (Standard)

2010B6090-01 (Reverse thread)

Frequency

2.4 - 2.5 GHz

Polarization

Linear

Operating temperature

-40 to +85 degC

Impedance

50 Ω

Weight

7.4 g

Antenna Type

Swivel

10.2.1

FCC and IC

The device SPWF04S has been tested and complies with the FCC part 15 and IC RSS-247

regulations. These limits are designed to provide reasonable protection against harmful

interference in approved installations. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions:



The device must not cause harmful interference.



The device must accept any interference received, including interference that may

cause undesired operation.

Modifications or changes to this equipment not expressly approved by the party

responsible for compliance may render void the user's authority to operate this equipment.

The module has been approved by Industry Canada to operate with the antenna type listed

in Table 10: "Antennas used for certification of SPWF04SC" with the maximum possible

gain there indicated. Antenna types not included in Table 10: "Antennas used for

certification of SPWF04SC" and that have a gain greater than the maximum gain indicated

for that type in the Table 11: "Titanis antenna characteristics", are strictly prohibited for use

with this module.

Table 11: Titanis antenna characteristics

Characteristics

Conditions (1)

Min.

Typ.

Max.

Peak Gain

4.0 dBi

4.1 dBi

4.4 dBi

Frequency 2.4

– 2.5 GHz, measured in 3D chamber

(near field)

Efficiency

80%

85%

90%

VSWR

1.1:1

1.2:1

1.3:1

Frequency 2.4

– 2.5 GHz, measured in Network

Analyzer

Notes:

The safe user distance, for RF exposure, is ≥ 50 mm (in compliance with 447498 D01

General RF Exposure Guidance v06 and RSS-102 Issue 5).