© 2017 Kingbright. All Rights Reserved. Spec No: DSAM7148 / 1201008462 Rev No: V.4B Date: 07/15/2017

Page 1 / 5

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

AAAF3529VBDSEJ3ZGS

3.5 x 2.8 mm Surface Mount SMD Chip LED

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

DESCRIPTIONS

The Blue source color devices are made with InGaN

Light Emitting Diode

The Hyper Red device is based on light emitting diode

chip made from AlGaInP

The Green source color devices are made with InGaN

on Sapphire Light Emitting Diode

Electrostatic discharge and power surge could

Damage the LEDs

It is recommended to use a wrist band or anti-

electrostatic glove when handling the LEDs

All devices, equipments and machineries must be

electrically grounded

FEATURES

Outstanding material efficiency

Low power consumption

Can produce any color in visible spectrum, including

white light

Suitable for all SMD assembly and solder process

Available on tape and reel

Package: 2000pcs / reel

Moisture sensitivity level: 3

RoHS compliant

APPLICATIONS

Backlight

Status indicator

Home and smart appliances

Wearable and portable devices

Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

Part Number

Emitting Color

(Material)

Lens Type

Min.

Typ.

2θ1/2

AAAF3529VBDSEJ3ZGS

Water Clear

200

300

(AlGaInP)

400

560

400

580

130

°