3/9

Part No. :

LTL-R42NGYADH229

BNS-OD-FC002/A4

Through Hole Lamp

LTL-R42NGYADH229

3. Absolute Maximum Ratings at TA=25℃

℃

℃

℃

Parameter

Maximum Rating

Unit

Power Dissipation

52

mW

Peak Forward Current

(Duty Cycle≦1/10, Pulse Width≦10ms)

60

mA

DC Forward Current

20

mA

Derating Linear From 30℃

0.27

mA/℃

Operating Temperature Range

-30°C to + 85°C

Storage Temperature Range

-40°C to + 100°C

Lead Soldering Temperature

[2.0mm (.079") From Body]

260°C for 5 Seconds Max.

4. Electrical / Optical Characteristics at TA=25℃

℃

℃

℃

Parameter

Symbol

Min.

Typ.

Max.

Unit

Test Condition

Luminous Intensity

IV

8.7

19

50

mcd

IF=10mA

Note 1,5

Viewing Angle

2θ1/2

100

deg

Note 2 (Fig.6)

Peak Emission Wavelength

λP

572

nm

Measurement

@Peak (Fig.1)

Dominant Wavelength

λd

566

569

574

nm

IF=10 mA, Note 4

Spectral Line Half-Width

Δλ

15

nm

Forward Voltage

VF

2.0

2.5

V

IF=10mA

Reverse Current

IR

100

μA

VR = 5V, Note 6

NOTE:

1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

3. Iv classification code is marked on each packing bag.

4. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines

the color of the device.

5. Iv guarantee must be included with ±15% testing tolerance.

6. Reverse voltage (VR) condition is applied for IR test only. The device is not designed for reverse operation.