Fiber Optic Detector

OPF482

© TT electronics plc

Issue A

11/2016

Page 1

TT Electronics | BI Technologies

4200 Bonita Place, Fullerton, CA USA 92835-1053 |Ph: +1 714-447-2300

www.ttelectronics.com | sensors@ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Description:

The OPF482 is a low noise silicon PIN photodiode mounted in a low cost package for fiber op c applica ons. It offers fast

response at moderate bias and is compa ble with LED and laser diode sources in the 800-1000 nm wavelength region. Low

capacitance improves signal to noise performance in typical short haul LAN applica ons.

The OPF482 is designed to be compa ble with mul mode op cal fibers from 50/125 to 200/300 microns.

Applications:



Industrial Ethernet equipment



Copper-to-fiber media conversion



Intra-system fiber op c links



Video surveillance systems

Features:



High speed, low capacitance



Popular ST® style receptacle



Pre-tested with fiber to assure performance



Component pre-mounted and ready to use



100MHz operation minimum