1

Configuration

• Slide-On BMA Plug Connector

• 50 Ohms

• Straight Body Geometry

• RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ,

PE-SR405TN Interface Type

• Solder/Non-Solder Contact Attachment

• Bulkhead

• 11 mm Hex

Features

• Max. Operating Frequency 22 GHz

• Good VSWR of 1.3:1

• Gold Plated Beryllium Copper Contact

• 51.18µ in. minimum contact plating

• Blind Mate Connector

• Low-Engagement Force

Applications

• General Purpose Test

• Rack and Panel Mount Applications

• Custom Cable Assemblies

• Blind Mating

• Rack and Panel

• Phased Array Systems

• Base Stations

• RF Backplanes

• Test I/O

.

Description

Pasternack’s PE45310 BMA plug slide-on bulkhead connector with solder/non-solder contact attachment for RG405, PE-

SR405AL, PE-SR405FL, PE-SR405FLJ and PE-SR405TN is part of our full line of RF components available for same-day

shipping. Our BMA plug connector operates up to a maximum frequency of 22 GHz and offers good VSWR of 1.3:1. The

Pasternack blind mate connector is ideal for applications where direct visual or tactile access to the connection point is

not possible, for example, when two circuit boards need to be mated. This BMA bulkhead connector allows designers to

create external connections on their product enclosures, and can be used in a variety of other rack mount and panel mount

applications.

Our BMA plug bulkhead connector PE45310 datasheet specifications and drawing with dimensions are shown below in

this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and

customize their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply

create a custom cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly

build your custom cable assemblies for you and ship same-day.

Electrical Specifications

Description

Minimum

Typical

Maximum

Units

Frequency Range

DC

22

GHz

VSWR

1.3:1

Insertion Loss

0.14

dB

Operating Voltage (AC)

350

Vrms

Dielectric Withstanding Voltage (AC)

1,000

Vrms

Insulation Resistance

5,000

MOhms

.

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: BMA Plug Bulkhead Mount Slide-On Connector Solder/Non-Solder Contact Attachment for

RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ, Gold Plated PE45310

PE45310 REV 1.0

BMA Plug Bulkhead Mount Slide-On Connector Solder/

Non-Solder Contact Attachment for RG405, PE-

SR405AL, PE-SR405FL, PE-SR405FLJ, Gold Plated

RF Connectors Technical Data Sheet

PE45310