Kawasaki USB device

KL5KUSB201

Copyright © 2002 Kawasaki Microelectronics Inc. Kawasaki LSI Inc. All rights reserved.

10. References

Latest USB Specification, which describes both Full Speed and High Speed operation.

The specification is available from USB_IF web site. Following three specifications are

piled up to one zip file.

a. USB specification (April 27,2000)

b. errata to the USB2.0 specification (December 7,2000)

c. Mini-B connector Engineering Change Notice to the USB 2.0 specification

10.2 UTMI Specification

This is the USB2.0 PHY function macro specification proposed by Intel Corp.

The interface between PHY and SIE is defined. It is downloadable from Intel site.

a. The USB 2.0 Transceiver Macrocell Interface, version 1.05(UTMI) specification

10.3 T&MT Interface Specification

This document is the macrocell test interface proposed by Intel Corp. To test PHY

efficiently, card dimensions, connector pin layout and interface signals are defined.

It is also downloadable from Intel web site.

a. The USB 2.0 Transceiver and Macrocell Tester (T&MT) Interface Specification

10.4 High Speed Board Design Guide

This document depicts the general guideline of High Speed USB device board design.

Design tips of handling the high speed signals are available in this document. This

document is downloadable from the Intel web site, too.

10.5 Kawasaki’s Datasheet

More detailed documents are available by Kawasaki. Please contact our sales person.

a. KL5KUSB201 datasheet

b. KL5BUDV002 datasheet