Rev C

DCMPP06 SERIES

6 Watt

Medical DC/DC Power Converters

02/04/2016

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •

Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 3 of 5

TECHNICAL SPECIFICATIONS: DCMPP06 SERIES

All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

SPECIFICATION

TEST CONDITIONS

Min

Typ

Max

Unit

GENERAL SPECIFICATIONS

Efficiency

Nominal input voltage and full load

See Table

Switching Frequency

225

250

275

kHz

Isolation Voltage

1 minute

Input to Output

5000

VAC

Isolation Capacitance

12

17

pF

Leakage Current

240VAC, 60Hz

2

µA

Clearance/Creepage

8

mm

ENVIRONMENTAL SPECIFICATIONS

Operating Ambient Temperature

Without derating

-40

+88

°C

With derating

+88

+105

Storage Temperature Range

-55

+125

°C

Thermal Impedance

Natural convection (20LFM)

18

°C/W

Relative Humidity

5

95

% RH

Thermal Shock

MIL-STD-810F

Vibration

MIL-STD-810F

MTBF

MIL-HDBK-217F Ta=25°C, Full load

4,718,000

hours

PHYSICAL SPECIFICATIONS

Weight

0.48oz (14g)

Dimensions (L x W x H)

1.25x0.80x0.40 inches

(31.8x20.3x10.2mm)

Case Material

Non-conductive black plastic

Base Material

Non-conductive black plastic

Potting Material

Silicon (UL94-V0)

SAFETY & EMC CHARACTERISTICS

Safety Approvals

ANSI/AAMI ES60601-1, IEC60601-1, EN60601-1

EMI (See Note 2)

EN55011, EN55022, and FCC Part 18

Class A, Class B

ESD

EN61000-4-2

Air ±8kV

Contact ±6kV

Perf. Criteria A

Radiated Immunity

EN61000-4-3

10 V/m

Perf. Criteria A

Fast Transient (See Note 3)

EN61000-4-4

±2kV

Perf. Criteria A

Surge (See Note 3)

EN61000-4-5

±2kV

Perf. Criteria A

Conducted Immunity

EN61000-4-6

10 Vrms

Perf. Criteria A

Power Frequency Magnetic Field

EN61000-4-8

100A/m continuous; 1000A/m 1 second

Perf. Criteria A

NOTES

1. The “x” in the model number represents the Pin Connection type. It can be “A” for pin connection type A or “B” for pin connection type B. See

mechanical drawings on page 4 for more information.

2. The DCMPP06 series meets EMI Class A without an external filter added. This series can only meet EMI Class B with external components

added. Please contact factory for more information.

3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.

• For 5VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 1000µF/25V)

and a reverse diode (Vishay V10P45) in parallel.

• For 12VDC & 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series,

470µF/50V) in parallel.

• For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330µF/100V)

in parallel.

4. Remote ON/OFF control is optional and is only available for “B” type pin connection models. To order the converter with remote ON/OFF add the

suffix “-P” to the model number (Ex: DCMPP06-48S12B-P).

5. Trim function is optional and is only available for “B” type pin connection models. To order the converter with Trim pin add the suffix “-T” to the

model number (Ex: DCMPP06-48S12B-T).

CAUTION: This power module is not internally fused. An input line fuse must always be used.

*Due to advances in technology, specifications subject to change without notice.