This Data Sheet states AMD’s current technical specifications regarding the Product described herein. This Data

Sheet may be revised by subsequent versions or modifications due to changes in technical specifications.

Publication# 21195

Rev: E Amendment/+2

Issue Date: March 23, 2001

Am29F017D

16 Megabit (2 M x 8-Bit)

CMOS 5.0 Volt-only, Uniform Sector Flash Memory

DISTINCTIVE CHARACTERISTICS

s Optimized for memory card applications

— Backwards-compatible with Am29F016C and

Am29F017B

s 5.0 V

± 10%, single power supply operation

— Minimizes system level power requirements

s Manufactured on 0.23 µm process technology

s High performance

— Access times as fast as 70 ns

s Low power consumption

— 25 mA typical active read current

— 30 mA typical program/erase current

— 1 µA typical standby current (standard access

time to active mode)

s Flexible sector architecture

— 32 uniform sectors of 64 Kbytes each

— Any combination of sectors can be erased.

— Supports full chip erase

— Group sector protection:

A hardware method of locking sector groups to

prevent any program or erase operations within

that sector group

Temporary Sector Group Unprotect allows code

changes in previously locked sectors

s Embedded Algorithms

— Embedded Erase algorithm automatically

preprograms and erases the entire chip or any

combination of designated sectors

— Embedded Program algorithm automatically

writes and verifies bytes at specified addresses

s Unlock Bypass Program Command

— Reduces overall programming time when

issuing multiple program command sequences

s Minimum 1,000,000 program/erase cycles per

sector guaranteed

s 20-year data retention at 125

°C

— Reliable operation for the life of the system

s Package options

— 40-pin TSOP

— 48-pin TSOP

s Compatible with JEDEC standards

— Pinout and software compatible with

single-power-supply Flash standard

— Superior inadvertent write protection

s Data# Polling and toggle bits

— Provides a software method of detecting

program or erase cycle completion

s Ready/Busy# output (RY/BY#)

— Provides a hardware method for detecting

program or erase cycle completion

s Erase Suspend/Erase Resume

— Suspends a sector erase operation to read data

from, or program data to, a non-erasing sector,

then resumes the erase operation

s Hardware reset pin (RESET#)

— Resets internal state machine to the read mode