| 数据搜索系统,热门电子元器件搜索 |
|
ACT2803 数据表(PDF) 1 Page - Active-Semi, Inc |
|
|
|||||||||||||||||||||||||||||
ACT2803 数据表(HTML) 1 Page - Active-Semi, Inc |
|
1 / 22 page ![]() Innovative PowerTM - 1 - www.active-semi.com Copyright © 2016 Active-Semi, Inc. FEATURES Dedicated Single-chip Integrated Dual Cell Battery Management Dual Cell Battery Charger with Cell Balancing Management Auto Detection support USB BC1.2, Chinese YD/T 1591-2009, Apple, and Samsung Devices Meet EN55022 Class B Radiated EMI Standard Pass MFi Test 4.5V-5.5V Input Voltage and 2.75A Input Current Limit 2.4A Output Current with CC Regulation 5.07V+/-1% Output with Prioritized Power Path from Input to Output 4.20V/4.35V +/- 0.5% Battery Charge Voltage Accuracy of Each Cell Output Plug-in Detection Wakeup and No Load Detection Sleep Mode Optimized Power Path and Battery Charge Control <10uA Low Battery Drainage Current I2C Port for Optimal System Performance and Status Reporting Configurable Charge, Discharge and HZ modes >92% Charge and Discharge Efficiency at 2.4A Output for Full Battery Range 4 Modes of LED Operation Capability to Charge Wearable Devices Weak Input Sources Accommodation Safety: Input Over-voltage Protection Nearly Zero Power Short Circuit Protection Output Over-voltage Protection Battery Over-charge and Over-discharge Protections Charge/Discharge Thermal Regulation TQFN5x5-40 Package APPLICATIONS Backup Battery Pack Power Bank Dual Cell Boost Battery Charger Bluetooth Speaker Standalone Battery Charger with USB Output GENERAL DESCRIPTION ACT2803 is a space-saving and dedicated single- chip solution for dual-cell battery charge and discharge. It takes 5V USB input source to charge a dual cell battery with boost configuration in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches 10% of the fast charge rate. The battery charger is thermally regulated at 110˚C with charge current foldback. If input 5V is not present, ACT2803 discharge a dual cell battery with buck configuration to provide 5.07V+/-1% to output ports. There is a power path from input to output. The cycle-by-cycle peak current mode control, constant current regulation, short circuit protection and over voltage protection maximize safe operation. ACT2803 provides 4 LED drive pins for battery capacity level and charge status indication to indicate 25%, 50%, 75%, and 75% above battery level with battery impedance compensation. The LED indication patterns are programmable . ACT2803 is available in a thermally enhanced 5mmx5mm QFN55-40 package with exposed pad. 5V/2.4A Dual Cell Battery Power Manager Rev 1, May-12-2016 ACT2803 Buck Output CC/CV 6.0 5.0 4.0 3.0 2.0 1.0 0 Output Current (mA) 0 500 1000 1500 2000 2500 3000 VBAT = 8.2V VBAT = 6.0V |
类似零件编号 - ACT2803 |
|
类似说明 - ACT2803 |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |