WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331

EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020

IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T 3Z2, Tel: (905) 453 2200

IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590

IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111

IR FAR EAST: K&H Bldg., 2F, 3-30-4 Nishi-Ikebukuro, Toshima-ku, Tokyo 171 Japan Tel: 81 3 3983 0641

IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: 65 221 8371

http://www.irf.com/

Data and specifications subject to change without notice.

9/97

IRVRM2

Dynamic Performance (continued)

Rectifier

International

Fig 29. Turn off Waveform (Full Load)

Fig 28. Turn on Waveform (Full Load)

Fig 27. Output Voltage Ripple (Full Load)

Fig 26. Output Voltage Ripple (No Load)

Turn On Transient

Output voltage must remain within 10% of

the nominal set point. Also, output voltage

should reach its specified range, -2.1% ~

+3.6%, within 10ms after input voltage

reaches 95% of nominal voltage.

Parameter

Limit

Measured

Risetime

10ms

3.1ms

Overshoot

3.08V

2.82V

Output Ripple Voltage

Output ripple voltage is specified as a ±1%

range, (56mV peak-to-peak) of the nominal

output voltage.

Parameter

Limit

Measured

P-P ripple

56mV

15.2mV