数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

LR-W5SN 数据表(PDF) 20 Page - OSRAM GmbH

部件名 LR-W5SN
功能描述  white SMD package, colorless clear silicone
PDF  20 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  OSRAM [OSRAM GmbH]
网页  http://www.osram.com
标志 OSRAM - OSRAM GmbH

LR-W5SN 数据表(HTML) 20 Page - OSRAM GmbH

Back Button LR-W5SN Datasheet HTML 12Page - OSRAM GmbH LR-W5SN Datasheet HTML 13Page - OSRAM GmbH LR-W5SN Datasheet HTML 14Page - OSRAM GmbH LR-W5SN Datasheet HTML 15Page - OSRAM GmbH LR-W5SN Datasheet HTML 16Page - OSRAM GmbH LR-W5SN Datasheet HTML 17Page - OSRAM GmbH LR-W5SN Datasheet HTML 18Page - OSRAM GmbH LR-W5SN Datasheet HTML 19Page - OSRAM GmbH LR-W5SN Datasheet HTML 20Page - OSRAM GmbH  
Zoom Inzoom in Zoom Outzoom out
 20 / 20 page
background image
LR W5SN, LA W5SN, LY W5SN
2010-09-08
20
Fußnoten:
1)
Helligkeitswerte werden während eines Strompulses
einer typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 8 % und einer erweiterten
Messunsicherheit von +/- 11 % gemessen (gemäß
GUM mit Erweiterungsfaktor k = 3).
2)
Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische technische oder
abgeleitete Parameter nur aufgrund statistischer
Werte wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen
oder abgeleiteten Werten unterscheiden können. Falls
erforderlich,
z.B.
aufgrund
technischer
Verbesserungen, werden diese typischen Werte ohne
weitere Ankündigung geändert.
3)
Die dominante Wellenlänge wird während eines
Strompulses einer typischen Dauer von 25 ms, mit
einer internen Reproduzierbarkeit von +/- 0,5 nm und
einer erweiterten Messunsicherheit von +/- 1 nm
gemessen
(gemäß
GUM
mit Erweiterungsfaktor
k = 3).
4)
Vorwärtsspannungen
werden
während
eines
Strompulses einer typischen Dauer von 8 ms, mit
einer internen Reproduzierbarkeit von +/- 0,05 V und
einer erweiterten Messunsicherheit von +/- 0,1 V
gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
5)
Im gestrichelten Bereich der Kennlinien muss mit
erhöhten
Helligkeitsunterschieden
zwischen
Leuchtdioden innerhalb einer Verpackungseinheit
gerechnet werden.
Dimmverhältnis im Gleichstrom-Betrieb max. 5:1.
6)
Maße werden wie folgt angegeben: mm (inch)
7)
Ein
kritisches
Bauteil
ist
ein
Bauteil,
das
in
lebenserhaltenden
Apparaten
oder
Systemen
eingesetzt wird und dessen Defekt voraussichtlich zu
einer
Fehlfunktion
dieses
lebenserhaltenden
Apparates oder Systems führen wird oder die
Sicherheit oder Effektivität dieses Apparates oder
Systems beeinträchtigt.
8)
Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden,
dass die Gesundheit und das Leben des Patienten in
Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1.)
Brightness values are measured during a current
pulse of typical 25 ms, with an internal reproducibility
of +/- 8 % and an expanded uncertainty of +/- 11 %
(acc. to GUM with a coverage factor of k = 3).
2)
Due to the special conditions of the manufacturing
processes of LED, the typical or calculated data of
technical parameters can only reflect statistical
figures. These do not necessarily correspond to the
actual parameters of each single product, which could
differ from the typical or calculated data of the typical
characeristic line. If requested, e.g. because of
technical improvements, these typ. data will be
changed without any further notice.
3)
The dominant wavelength is measured at a current
pulse of typical 25 ms, with an internal reproducibility
of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm
(acc. to GUM with a coverage factor of k=3).
4)
The forward voltage is measured during a current
pulse of typical 8 ms, with an internal reproducibility of
+/- 0,05 V and an expanded uncertainty of +/- 0,1 V
(acc. to GUM with a coverage factor of k=3).
5)
In the range where the line of the graph is broken, you
must expect higher brightness differences between
single LEDs within one packing unit.
Dimming range for direct current mode max. 5:1
6)
Dimensions are specified as follows: mm (inch)
7)
A critical component is a component used in a
life-support device or system whose failure can
reasonably be expected to cause the failure of that
life-support device or system, or to affect its safety or
the effectiveness of that device or system.
8)
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health
and the life of the user may be endangered.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com