MP6233 –CURRENT-LIMITED POWER DISTRIBUTION SWITCH

MP6233 Rev. 1.0

www.MonolithicPower.com

9

8/21/2014

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2014 MPS. All Rights Reserved.

APPLICATION INFORMATION

Power-Supply Considerations

Over 10μF capacitor between IN and GND is

recommended.

This precaution reduces power-supply transients

that may cause ringing on the input and improves

the immunity of the device to short-circuit

transients.

In order to achieve smaller output load transient

ripple, placing a high-value electrolytic capacitor

on the output pin(s) is recommended when the

load is heavy.

OUT2

MP6233

DUAL-CHANNEL

OUT1

1

2

3

4

5

6

7

8

+5V

To USB Controller

Output 1

Output 2

FLAG1

FLAG2

EN1

IN

GND

EN2

Figure2—Application Circuit