9/22

M27C512

MAXIMUM RATING

Stressing the device outside the ratings listed in

Table 4. may cause permanent damage to the de-

vice. These are stress ratings only, and operation

of the device at these, or any other conditions out-

side those indicated in the Operating sections of

this specification, is not implied. Exposure to Ab-

solute Maximum Rating conditions for extended

periods may affect device reliability. Refer also to

the STMicroelectronics SURE Program and other

relevant quality documents.

Table 4. Absolute Maximum Ratings

and the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.

2. Minimum DC voltage on Input or Output is –0.5V with possible undershoot to –2.0V for a period less than 20ns. Maximum DC

3. Depends on range.

Symbol

Parameter

Value

Unit

–40 to 125

°C

Temperature Under Bias

–50 to 125

°C

Storage Temperature

–65 to 150

°C

Lead Temperature during Soldering

(note 1)

°C

(2)

Input or Output Voltage (except A9)

–2 to 7

V

Supply Voltage

–2 to 7

V

(2)

A9 Voltage

–2 to 13.5

V

Program Supply Voltage

–2 to 14

V