EV28115DQ-00B

4A, 6V, Synchronous

Step-Down Switching Regulator EV Board

EV28115DQ-00B Rev. 1.0

www.MonolithicPower.com

1

10/12/2009

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2009 MPS. All Rights Reserved.

The Future of Analog IC Technology

DESCRIPTION

The EV28115DQ-00B is an evaluation board for

the MP28115. The MP28115 delivers 4A

continuous load current over an operating input

voltage 2.7V to 6.0V. The output is adjustable over

resistor from FB pin to ground.

The current mode control used in MP28115

provides fast transient response and cycle-by-

cycle current limiting. The EV board will go into

hiccup mode to protect against over current/short

circuit.

This EV board can be turned on or shut down via a

remote ON/OFF input that is referenced to ground.

This input is compatible with popular logic devices.

This EV board also has power good indicator. The

output of POK is pulled to ground when output

voltage is under or over 10% of its setting voltage.

ELECTRICAL SPECIFICATIONS

Parameter

Symbol

Value

Units

Input Voltage

2.7 – 6.0

V

Output Voltage

1.8

V

Output Current

4

A

FEATURES

• 4A Output Current

• 2.7V to 6.0V Operating Input Range

• Built-in Soft Start

• Fully Assembled and Tested

APPLICATIONS

• µP/ASIC/DSP/FPGA Core and I/O Supplies

• Printers and LCD TVs

• Network and Telecom Equipment

• Point of Load Regulators

“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of

Monolithic Power Systems, Inc.

EV28115DQ–00B EVALUATION BOARD

(L x W x H) 2.4” x 2.0” x 0.5”

(6.1cm x 5.1cm x 1.4 cm)

Board Number

MPS IC Number

EV28115DQ-00B

MP28115DQ

70

65

60

75

80

85

90

95

100

OUTPUT CURRENT (A)

0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5